SOLICITATION NOTICE
34 -- 50Hz Electrical-Power Tools
- Notice Date
- 8/20/2004
- Notice Type
- Solicitation Notice
- NAICS
- 333120
— Construction Machinery Manufacturing
- Contracting Office
- Department of the Air Force, United States Air Force Europe, 65 CONS, 65 CONS/LGC, Lajes Field, Azores APO, AE, 09720
- ZIP Code
- 09720
- Solicitation Number
- Reference-Number-F1013942150100
- Response Due
- 9/7/2004
- Archive Date
- 10/30/2004
- Point of Contact
- Rozelle Dickens, Contract Specialist, Phone 011-351-295-571190, Fax 011-351-295-573758, - Maria Meneses, Contract Specialist, Phone 011 351 295 571483, Fax 011 351 295 573758,
- E-Mail Address
-
rozelle.dickens@lajes.af.mil, maria.meneses@lajes.af.mil
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes as the solicitation; quotations are being requested and a written solicitation will not be issued. The solicitation number is F1013942150100. The solicitation is issued as a Request for Quotation (RFQ). The solicitation documents and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2001-13 and DFARS Change Notice 20001213. All responsible sources may submit a written proposal, which will be considered. Facsimile submissions will be accepted. The North American Industry Classification System (NAICS) code for the solicitation is 333991. This requirement is RESTRICTED to Mainland Portugal and its territories in accordance with the Bilateral Agreement between Portugal and the United States dated 1995. Five items are requested. They are listed as follows: 1) Omga radial arm saw model# 800 P3S complete with 3 phase 4cv, 380 volt, 50hz electric motor, 300mm diameter blade, blade bore size is 30 mm, 3000 rpm blade [brand name, or equal] (Quantity: 1); 2) Griggio Jointer model# PF 530. 530mm Table width, 2900mm table length, fence size is 1350mmX170mm,working table height is 800mm, fence tilts between 0&45 degrees, has 3 phase 5.5HP motor [brand name, or equal] (Quantity: 1); 3) Griggio Shaper model # T-220, variable speed 3,000 - 10,000 rpm, 380 volt, 50 Hz, 7.5 hp motor [brand name, or equal] (Quantity: 1); 4) Griggio planer model# PSA 630, Planer width 630mm, work table dimensions 630mm X 1000MM, Max height is adjustable from 3mm to 300mm, 120mm shaft diameter, 4 cutting blades, 5000rpm shaft speed rotation, 3 phase 7.5 hp main motor [brand name, or equal] (Quantity: 1); 5) Rico Metal cutting Shear model# HGR 313, capable of cutting metal from 3mm - 13mm thick, Cut length 3000mm, Cut angle 1.5mm, 380 volt, 50HZ,3 phase 30CVMotor Power [brand name, or equal] (Quantity: 1). Proposals for items that are ?or equal? must include technical product data for those items. Items must be packed for transport and shipped to the Port in Praia da Vitoria, Terceira, Azores, Portugal. PROPOSAL PREPARATION INSTRUCTIONS: The provision at 52.212-1, Instructions to Offerors - Commercial items, applies to this acquisition. Offerors shall provide a firm fixed-price for above items. Delivery charges, if any, must be included in unit price. Provide projected delivery date. Successful contractor must meet all the responsibility requirements of Subpart 9.1 of the Federal Acquisition Regulation (FAR). A written notice of award or acceptance of offer, mailed or otherwise furnished to the successful offeror, shall result in a binding contract without further action by either party. Evaluation will be made based on the lowest price offer, and proposed delivery time. The following provisions and clauses also apply: 52.212-2 Evaluation?Commercial Items, 52.212-3 Offerors Representation and Certifications?Commercial Items, 52.212-4 -- Contract Terms and Conditions -- Commercial Items, 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items, 52.223-3 Hazardous Material Identification and Material Safety Data, 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items, 252.204-7004 Required Central Contractor Registration. Award will be based on lowest price submitted and responsiveness to the terms and conditions of the requirements. The full text of these clauses and provisions may be viewed in full text at the following web site: http://farsite.hill.af.mil. All proposals should be clearly marked with the bidders name and solicitation number. The due date for submission of proposals is 4:00 PM local time, 7 Sep 2004; send to 65 CONS/LGCA, 65th Contracting Squadron, Lajes Field, Terceira Azores. Facsimile submissions will be accepted. Point of contact: Rozelle D. Dickens 295 571190; FAX 295 573758 or e-mail to: rozelle.dickens@lajes.af.mil. Offerors are responsible to comply with this notice and any amendments thereto. Amendments to this RFQ will be published in the same manner as the initial synopsis/solicitation.
- Place of Performance
- Address: 65th Civil Engineering Squadron, 65CES Structures Shop, Building T-569, Lajes Area Base No. 4, Lajes Field, Terceira Island, Azores, APO, AE
- Zip Code: 09720
- Country: Portugal
- Zip Code: 09720
- Record
- SN00648539-W 20040822/040820212652 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |