Loren Data's SAM Daily™

FBO DAILY ISSUE OF SEPTEMBER 09, 2004 FBO #1018
SOLICITATION NOTICE

99 -- Power Street Sweeper for Chief Joseph Dam, Bridgeport, Washington

Notice Date

9/7/2004
 

Notice Type

Solicitation Notice
 

NAICS

423810 — Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers
 

Contracting Office

US Army Engineer District, Seattle, ATTN: CENWS-CT, PO Box 3755, Seattle, WA 98124-3755
 

ZIP Code

98124-3755
 

Solicitation Number

W912DW-04-Q-0169
 

Response Due

9/10/2004
 

Archive Date

11/9/2004
 

Point of Contact

Angela Dexter, 206-764-6801
 

E-Mail Address

Email your questions to US Army Engineer District, Seattle
(Angela.A.Dexter@nws02.usace.army.mil)
 

Small Business Set-Aside

N/A
 

Description

Power Street Sweeper for Chief Joseph Dam, Bridgeport, Washington. Go to the following address for all available project information: http://www.nws.usace.army.mil/ct/ebs/AdvertisedSolicitations.asp. Offerors are responsible for checking the referen ced page for any update(s) to the solicitation. The website is occasionally inaccessible due to maintenance. The Government is not responsible for any loss of Internet connectivity or lack of access to the document posted at the referenced website. The equipment required is Power Street Sweeper for Chief Joseph Dam, Bridgeport, Washington.. It is important for performance and consistency that the following specifications be required. Power street sweeper (Tennant Sentinel model, or equal),The Power Swee per bid shall meet or exceed the following specifications: 1. PERFORMANCE a) The engine shall be no less than 127hp turbocharged diesel b) The sweeper shall have right-hand steering. c) The sweeper shall have a sweeping brush assembly that has the ability for right and left-hand sweeping (with wet dust control) d) The sweeper shall have a minimum of a 96 high dump with overload indicator. e) The sweeper shall have a vacuum wand with an extension nozzle and a minimum of a 12 hose. f) A hopper clean-out tool and a hydrant coupling hose shall be included. g) The sweeper shall have four wheel power steering and have the ability to turn within a 13 radius. h) The sweeper shall have the ability to operate in cold weather/freezing conditions. i) The sweeper shall have the ability to reach a travel speed of 25mph 2. BRUSHES a) The sweeper shall have a minimum of a 51 main sweeping brush. b) The sweeper shall have a minimum of a 32 right and left hand side sweeping brush. c) The sweeper shall have a minimum of a 38 auxiliary/variable position sweeping brush or the equivalent. d) The sweeper shall have a total brush path not less than 124. 3. HOPPER a) The hopper shall be stainless steel. b) The hopper shall have a minimum capacity of 3.4 yards. c) The high dump shall have a minimum weight capacity of 4,000lbs. 4. OPERATOR COMFORT AND PROTECTION a) The cab shall be climate controlled (heat and air conditioning) b) The cab shall have a passenger seat. c) The cab shall have an AM/FM radio to allow operator weather updates. d) The sweeper shall have an engine access step kit. e) The sweeper shall have cab positive pressurization and filtered air. 5, MACHINE PROTECTION AND SAFETY EQUIPMENT a) The sweeper shall have rear rubber bumpers. b) The sweeper shall have a hopper high dump auto-lube feature. c) The sweeper shall have dual headlights, taillights, a dual rotating light with guards, and backup lights. d) The sweeper shall have an audible backup alarm. e) The sweeper shall have seatbelts for both seats. f) The sweeper shall have a hopper movement warning alarm g) The sweeper shall have total view glass cab doors or the equivalent. 6. DUST CONTROL SYSTEM a) The sweeper shall have a dry-filtering system. b) The sweeper shall have a minimum of a 90 gal. side brush water spray dust control system. c) The sweeper shall have a dust control system that is equal to or better than those required by EPA standards. 7. TIRES a) The tires shall be steel belted radials 8. WARRANTY a) The warranty shall be not less than 24 months on parts and 6 months on labor. 9. MANUALS AND TRAINING MATERIAL a) The vendor shall supply a minimum of three operator manuals. (Photocopies not acceptable) b) The vendor shall supply a minimum of three service manuals. (Photocopies not acceptable) c) The vendor shall supply a minimum of two operator-training videos. 10. TRAINING a) Training will be supplied for up to 1 5 people. Training will cover operation, safety, and maintenance of the sweeper. Training will be given by a person certified in writing by the supplier or equipment manufacture to be competent in the operation and maintenance of the unit supplied. All per sons successfully completing the training will be provided a letter or certificate of completion and competence. A complete list will be provided to project management for training documentation. The specifications will be available with the solicitation. The North American Industry Classification System (NAICS) Code is 423810, which is matched to SIC code 5082. Additional contracting opportunities, visit the Army Single Face to Industry at http://acquisition.army.mil/. This solicitation will be issued as an Electronic Bid Set (EBS) on the Seattle District U.S. Army Corps of Engineers Web page in electronic format only. No disks will be mailed. Firms must register via the Internet at the following address: http://www.nws.usace.army.mil/ct/ in order to rec eive notification of solicitation/amendment posting. The solicitation will be available for download on or about 7 September 2004.
 

Place of Performance

Address: US Army Engineer District, Seattle ATTN: CENWS-CT, PO Box 3755 Seattle WA

Zip Code: 98124-3755

Country: US
 

Record

SN00667043-W 20040909/040907213103 (fbodaily.com)
 

Source

FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |