MODIFICATION
61 -- Temperature and Flow Gauge for Chief Joseph Dam, Bridgeport ,WA
- Notice Date
- 9/21/2004
- Notice Type
- Modification
- NAICS
- 333513
— Machine Tool (Metal Forming Types) Manufacturing
- Contracting Office
- US Army Engineer District, Seattle, ATTN: CENWS-CT, PO Box 3755, Seattle, WA 98124-3755
- ZIP Code
- 98124-3755
- Solicitation Number
- W912DW-04-Q-0186
- Response Due
- 9/24/2004
- Archive Date
- 11/23/2004
- Small Business Set-Aside
- Total Small Business
- Description
- Requesting a Temperature and Flow Gauge for Chief Joseph Dam, Bridgeport, Washington. Go to the following address for all available project information: http://www.nws.usace.army.mil/ct/ebs/AdvertisedSolicitations.asp. Offerors are responsible for c hecking the referenced page for any update(s) to the solicitation. The website is occasionally inaccessible due to maintenance. The Government is not responsible for any loss of Internet connectivity or lack of access to the document posted at the refere nced website. The equipment required is Power Street Sweeper for Chief Joseph Dam, Bridgeport, Washington.. It is important for performance and consistency that the following specifications be required.This specification covers the supply of temperature gauges to Chief Joseph Dam Project, Bridgeport, WA. Remote Reading Dial Thermometers 1. Gauge Type: a. ASME B40.4-2001 Class 4b filled system thermometer, Ashcroft or equal. b. Gauges as indicated in Table 2. 2. Gauge Description: =?646?Q?a.=09Remote-mounted,_aluminum_hinged_ring,_6=1D_flush-?= =?646?Q?mounted_(ASME_B40.4-2001_Fig5_b),_rear_connection.?= b. Bendable extension with union connection (see Table 2). c. Stainless steel spring armor. =?646?Q?d.=090_-_120=B0C_and_20_-_100=B0C_(see_Table_2).?= e. Double high electric contacts (normally open) with separate commons. f. No mercury shall be permitted. 3. Specifications: a. Thermometer shall comply with ASME B40.4-2001 Class 4b. b. Accuracy shall be +/- 1% of range span. c. Movement shall be damped (silicone or equal) for increased resistance to shock and vibration. d. Thermometer must be mountable in any configuration without needing correction for head or elevation error; thermometer bulb must require no special orientation. e. Pointer shall be field-adjustable. f. Dial shall no less than the recommended minimums of ASME B40.4-2001 / 7.2 thru 7.4. g. The thermometer dial shall be designed to prevent parallax (anti-parallax) reading errors and shall be a white face with black graduations. h. Thermometer case shall be aluminum or better with black epoxy finish and with a hinged ring permitting lens replacement and pointer adjustment. i. Window shall be in accordance with ASME B40.4-2001 / 7.5.2 thru 7.5.4 =?646?Q?j.=09Gauge_shall_permit_adjustment_of_z?= =?646?Q?ero_and_contact_set_points_externally?= =?646?Q?_from_the_front_of_the_gauge_without_?= =?646?Q?removing_the_gauge_from_it=19s_mounting.?= k. Case depth shall not exceed 3 inches beyond mounting flange. l. Contact wires and capillary tube must exit rear of case. m. The extension to the bulb shall be: See Table 2. n. The capillary shall be: See Table 2. o. Capillary armor, probe and bendable extension material shall be AISI 300 series stainless steel. p. The electric contacts shall be double high (normally open) contacts configured to close upon temperature increase (with adjustable set points), switch ratings shall be no less than 120V AC, 1 amp (125VDC, 0.5 amp) resistive load max switching current. q. Electrical switch contacts shall be magnetic type snap-action contacts, high adjustable, electrically independent (separate commons) and ungrounded. Contact materials shall be silver palladium (AgPd 80/20) or better (gold). Table 2 - Temperature Gauge: =?646?Q?Units/Gauge=09Quantity=09Dial_Range_(=B0C)=09Capillary?= =?646?Q?_Length=09Bushing/Bendable_Extension/Probe_Length?= =?646?Q?1_Thru_16_Air_Cooler=09=09_97=09=090_-_120=09=09=09?= =?646?Q?100_ft.=09=BE=1D_MPT_Bushing_/=0915=1D_=09/_5/8x6=1D?= =?646?Q?1_thru_16_Thrust_Bearing_=09=09=0917=09=09=0920_-_100?= =?646?Q?=09=0980_ft.=09=BE=1D_MPT_Bushing_/=0939.5=1D_=09/_5/8x6=1D?= =?646?Q?1_thru_16_Thrust/Guide_Bearing_Oil=09=0917=09=09=0920_-?= =?646?Q?_100=09=0990_ft.=09=BE=1D_MPT_Bushing_/_=0919_=BC=1D=09/_5/8x6=1D?= =?646?Q?1_thru_16_Gen_Guide_Bearing=09=09=0917=09=09=0920_-_10?= =?646?Q?0=09=0990_ft.=09=BE=1D_MPT_Bushing_/_=09_9_=BE=1D=09/_ 5/8x6=1D?= =?646?Q?1-4_&_15-16_Turbine_Bearing_&_Oil_=09=0913=09=09=0920_?= =?646?Q?-_100=09=0970_ft.=09=BE=1D_MPT_Bushing_/=09_3=1D_=09/_5/8x5=1D?= =?646?Q?5_thru_14_Turbine_Bearing=09=09=0911=09=09=0920_-_10?= =?646?Q?0=09=0975_ft.=09=BE=1D_MPT_Bushing_/=09_24=1D_=09/_5/8x6=1D?= =?646?Q?5_thru_14_Turbine_Bearing_Oil=09=09=0911=09=09=0920_-?= =?646?Q?_100=09=0975_ft.=09=BE=1D_MPT_Bushing_/=093=1D=09/_5/8x6=1D?= The specifications will be available with the solicitation. The North Am erican Industry Classification System (NAICS) Code is 334513, which is matched to SIC code 6680. Additional contracting opportunities, visit the Army Single Face to Industry at http://acquisition.army.mil/. This solicitation will be issued as an Electroni c Bid Set (EBS) on the Seattle District U.S. Army Corps of Engineers Web page in electronic format only. No disks will be mailed. Firms must register via the Internet at the following address: http://www.nws.usace.army.mil/ct/ in order to receive notific ation of solicitation/amendment posting. The solicitation will be available for download on or about 22 September 2004.
- Place of Performance
- Address: US Army Engineer District, Seattle ATTN: CENWS-CT, PO Box 3755 Seattle WA
- Zip Code: 98124-3755
- Country: US
- Zip Code: 98124-3755
- Record
- SN00678625-W 20040923/040921212554 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |