SOLICITATION NOTICE
59 -- MULTIPLE CABLE CONNECTOR, LEVEL I/SUBSAFE NAVSEA REQUIREMENTS. DWG # 815-1197395H, HOLE 021. (1) EA.
- Notice Date
- 10/7/2004
- Notice Type
- Solicitation Notice
- Contracting Office
- N00102 Building 153, 6th Floor Portsmouth, NH
- ZIP Code
- 00000
- Solicitation Number
- N0010205Q1006
- Response Due
- 10/29/2004
- Archive Date
- 11/30/2004
- Description
- C.1, ITEM 0001: Multiple cable connector (HOLE No.021) to be provided as an assembled unit IAW NAVSEA Dwg 815-1197395H. Hole No. 021 is identical to and is assembled the same as EHP No. 009 except wiring, grommet, and retainer plates to be modified by enclosure?s 1 and 2. Connector to consist of the following receptacles: three (3) each PC 5, symbol 1242.1 on drawing 1197348-F, six (6) each PC 6, symbol 1253.1 on dwg 1197352-G, one (1) each PC 38, symbol 1249.1 on dwg 1197349-F, and one (1) each PC 39, symbol 1255.1 on dwg 1197353-F. All receptacles are to be modified per Detail 1-A of dwg 1197395-H. Self-locking screws, pc 27 of Dwg 815-1197395H to be manufactured from CRES type NAS1352C4LN12 (1/4-20 x .75 lg CRES). Welding of receptacles and cover to hull fitting body to be IAW Navsea Dwg 815-1197368A. Completed assembly shall be inspected and tested IAW general note 5 of Dwg 815-1197395H. C.2, ITEM 0002: Exhibit ?A? SEQ A001 ? Certification data for Non-Nuclear Level 1 material. Contractor shall furnish certification data for the following pressure boundaries of Item 1: a) Body, PC 12 of Dwg 815-1197395H; Material: SAE-AMS-QQ-S-763A SST CL 316L. b) Cover, PC 13 of Dwg 815-1197395H; Material: Same as PC 12. c) Receptacle body PC 5 of Dwg 815-1197395H; Material: Same as PC 12. d) Receptacle body PC 6 of Dwg 815-1197395H; Material: Same as PC 12. e) Receptacle body PC 38 of Dwg 815-1197395H; Material: Same as PC 12. f) Receptacle body PC 39 of Dwg 815-1197395H; Material: Same as PC 12. f) Nut, retaining, PC 17 of Dwg 815-1197395H; Material: Ni-Al-Brz, ASTM B150 alloy UNS# C63200. Note: Marking to be in accordance with Tech Spec (PNS) 0940-899-007 H Rev 5 to satisfy Level 1. DI-MISC-81020 applies. Standard Clause C530 applies. C.3, ITEM 0002: Exhibit ?A? SEQ A002- Request for Deviation, Configuration Control. DI-CMAN-80640B applies. C.4, ITEM 0002: Exhibit ?A? SEQ A003- Request for Waiver, Configuation Control DI-CMAN-80641B applies. C.5, ITEM 0002: Exhibit ?A? SEQ A004- Procedure, Test, Liquid Penetrant. Vendor shall submit liquid penetrant procedures IAW NAVSEA Tech Pub T9074-AS- GIB/271 Rev 0 and PNS Standard Clause C514 to PNS for review and approval prior to delivery of material. UDI-T-23732B applies. C.6, ITEM 0002: Exhibit ?A? SEQ A005- Test/Inspection Report, Liquid Penetrant. Vendor shall submit results of liquid penetrant test performed IAW PNS Standard Clause C512. DI-NDTI-80809A applies. C.7, ITEM 0002: Exhibit ?A? SEQ A006- Test/Inspection Report, Hydrostatic. Vendor shall submit results of hydrostatic test performed IAW Dwg 815-1197395H. C.8, ITEM 0002: Exhibit ?A? SEQ A007 - Certification Data/Report: Quality Conformance. Vendor shall furnish results of Inspections/Tests required by Dwg 815-1197395H. DI-MISC-80678 applies. C.9, ITEM 0002: Exhibit ?A? SEQ A008 & A009- Welding Procedures and Welding Procedure Qualification Test Report IAW MIL-STD-248 and PNS Standard Clause C513. DI-MISC-80875 and DI-MISC-80876 apply. Waiver Clause K500 applies.
- Record
- SN00691247-W 20041009/041007212155 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |