MODIFICATION
28 -- NSN 2840-01-146-9472JF; P/N 5050M72G05; AFTERBURNER FLAMEHOLDER
- Notice Date
- 11/23/2004
- Notice Type
- Modification
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015
- ZIP Code
- 73145-3015
- Solicitation Number
- FA8104-05-R-0129
- Response Due
- 1/10/2005
- Archive Date
- 3/31/2005
- Point of Contact
- Treva Lichty, Contract Negotiator, Phone 405-739-4440, Fax 405-739-5493,
- E-Mail Address
-
treva.lichty@tinker.af.mil
- Small Business Set-Aside
- Total Small Business
- Description
- PR Number(s): FD20300548737 Item: 0001 ? 3-Year Basic Period NSN: 2840-01-146-9472JF Flameholder P/N: 5050M72G05 Description: Built of 3 sub assemblies (1) Inner, (1) Outer and (28) Radial Gutters making the whole assembly. The function of the flameholder is to maintain flame patterns in the exhaust duct just AFT of the mixer. The dimensions are overall length 11.730 inches nominal and overall width 2.580 inches minimum and 2.620 inches maximum. The material consists of Nickel Alloy flameholder material document and classification: AMS 5536 ASSN Standard Single Material response flameholder. ACFT: B1B. Engine: F101-102. Best Estimated Quantity: 203 EA Minimum Quantity: 102 EA Maximum Quantity: 253 EA Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery ? 120 Days After Receipt of Order Item: 1001 ? Option Year I NSN: 2840-01-146-9472JF Flameholder P/N: 5050M72G05 Description: Built of 3 sub assemblies (1) Inner, (1) Outer and (28) Radial Gutters making the whole assembly. The function of the flameholder is to maintain flame patterns in the exhaust duct just AFT of the mixer. The dimensions are overall length 11.730 inches nominal and overall width 2.580 inches minimum and 2.620 inches maximum. The material consists of Nickel Alloy flameholder material document and classification: AMS 5536 ASSN Standard Single Material response flameholder. ACFT: B1B. Engine: F101-102. Best Estimated Quantity: 39 EA Minimum Quantity: 20 EA Maximum Quantity: 49 EA Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery - 120 Days After Receipt of Order Item: 2001 ? Option Year II NSN: 2840-01-146-9472JF Flameholder P/N: 5050M72G05 Description: Built of 3 sub assemblies (1) Inner, (1) Outer and (28) Radial Gutters making the whole assembly. The function of the flameholder is to maintain flame patterns in the exhaust duct just AFT of the mixer. The dimensions are overall length 11.730 inches nominal and overall width 2.580 inches minimum and 2.620 inches maximum. The material consists of Nickel Alloy flameholder material document and classification: AMS 5536 ASSN Standard Single Material response flameholder. ACFT: B1B. Engine: F101-102. Best Estimated Quantity: 60 EA Minimum Quantity: 30 EA Maximum Quantity: 75 EA Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery - 120 Days After Receipt of Order The proposed contract is 100% set aside for small business concerns. The proposed contract is for a 3-year basic period and two one-year option periods. Electronic procedure will be used for this solicitation. All responsible sources may submit a bid, proposal, or quotation, which shall be considered by the agency. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. Additional information concerning qualification requirements can be obtained at the following office: OC-ALC/BC ATTN: SOURCE DEVELOPMENT OFFICE 3001 STAFF DRIVE STE 1AG85A TINKER AFB, OK 73145 (405) 739-7244 See Note(s) 26. The approximate issue date of the solicitation will be 10 December 2004. The approximate response date of the solicitation will be 10 January 2005. The anticipated award date will be 15 February 2005. First Article Test is Required. No telephone requests. The solicitation must be printed from FedBizOps by the contractor. This office will not mail solicitations. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.
- Record
- SN00712284-W 20041125/041123211908 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |