MODIFICATION
99 -- Modification 1-Gabriel Electronics Waveguide/Antenna and Parts
- Notice Date
- 11/30/2004
- Notice Type
- Modification
- Contracting Office
- FEDERAL AVIATION ADMINISTRATION, AMQ-210 Aeronautical Center (AMQ)
- ZIP Code
- 00000
- Solicitation Number
- DTFAAC-05-R-00229
- Response Due
- 12/2/2004
- Description
- Modification 1: In the parts list, under Elliptical W/G, the 350' is an error. The waveguide should be shipped on one reel. If shipment on one reel is impractical, the waveguide can be divided onto three reels. The three reels must not be less than 592' for one, 559' for the other, and 449' for the third. Lesser lengths could cause a shortage on one or more waveguide runs. The FAA has a requirement for waveguide/antenna components for an installation in Cedar Hill, TX. Gabriel Electronics part numbers are provided. Equivalent parts will be accepted with adequate verification of equivalency to the Gabriel parts. Download attached Request for Quotations, Parts List, Statement of Work and Business Declaration Form. Quotes may be provided via e-mail at connie.m.houpt@faa.gov or facsimile, 405/954-9219. Quotes must be received by 15:00 CST, December 2, 2004. Inquiries regarding this requirement should be directed to the Contracting Officer, Connie M. Houpt, (405) 954-7820.
- Web Link
-
FAA Contract Opportunities
(http://www.asu.faa.gov/faaco/index.cfm?ref=3904)
- Record
- SN00714447-W 20041202/041130211836 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |