SOURCES SOUGHT
J -- DRYDOCK REPAIRS OF USCGC COHO (WPB-87321)
- Notice Date
- 12/16/2004
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- DHS - Direct Reports, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street Suite 600, Norfolk, VA, 23510-9102
- ZIP Code
- 23510-9102
- Solicitation Number
- DDUSCGCCOHO(WPB87321)
- Response Due
- 12/27/2004
- Archive Date
- 1/11/2005
- Point of Contact
- Wendy Culbreth, Contract Specialist, Phone (757) 628-4657, Fax (757) 628-4675, - Michael Monahan, Supervisory Contract Specialist, Phone 757-628-4639, Fax 757-628-4676,
- E-Mail Address
-
wculbreth@mlca.uscg.mil, mmonahan@mlca.uscg.mil
- Description
- The U.S. Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns only. The estimated value of this procurement is between $100,000.00 and $250,000.00. The small business size standard is less than 1,000 employees. The NAICS Code is 336611. The acquisition is for DRYDOCK repairs to the USCGC COHO (WPB-87321), a 87 Foot Patrol Boat. The USCGC COHO is homeported in Panama City, FL. All work will be performed at contractor's facility. The USCGC COHO is geographically restricted from Brownsville, TX to Shallottee Inlet, NC. The performance period will be 42 calendar days with a start date of 6 June 2005. The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC COHO (WPB-87321). This work will include, but is not limited to: cleaning and inspecting fuel tanks, clean sewage and grey water collection and holding tanks, realigning main engine/reduction gear, removing, inspecting, and reinstalling propeller shafts, straighten shaft, inspect water lubricated shaft bearings, renewing intermediate bearing and aft bearing, removing, inspecting and reinstalling propellers, preserving transducer hull rings, overhauling and renewing valves, removing, inspecting and reinstalling rudder assemblies, preserving underwater body, renewing draft figures, preserve rib wet notch neck and stern door interior surface, preserve freeboard, modify and renew cathodic protection system, renew capastic fairing, provide temporary logistics, routine drydocking , and renew deck and hull plating. Provide logistics to cutter for systems that are affected during overhauls such as, office space, telephone, parking, duty section berthing, lights, power, compressed air, heavy lift equipment, refuse disposal, dry, paint and flammable stores. All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. At the present time, this acquisition is expected to be issued as a Small Business set aside. However, in accordance with FAR 19.1305, if your firm is HUBZone certified and intends to submit an offer on this acquisition, please respond by e-mail to HYPERLINK mailto:wculbreth@mlca.uscg.mil wculbreth@mlca.uscg.mil or by fax (757) 628-4676/75. Questions may be referred to Wendy Culbreth at (757) 628-4657. In response please include the following: (a) a positive statement of your intent to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and phone numbers and (d) if your company does not own a drydock, a letter of commitment from the company providing the drydock during the performance period of this availability. At least two references are requested, but more are desirable. Contractors are reminded that should this acquisition become a HUBZone set aside, FAR 52.219-3, Notice of Total HUBZone Set-Aside, will apply, which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other HUBZone small business concerns. Your response is required by December 27, 2004. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone set aside. Failure to submit all information requested may result in an small business set-aside. A decision on whether this will be pursued as a HUBZone small business set aside, or a Small Business set aside, will be posted on the FedBizOps website at http://www.eps.gov. NOTE: THIS NOTICE WAS NOT POSTED TO WWW.FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (16-DEC-2004); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/DHS-DR/USCG/COUSCGMLCA/DDUSCGCCOHO(WPB87321)/listing.html)
- Record
- SN00722755-F 20041218/041216213052 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |