PRESOL | 95 | ASTM A36 Steel: Plate, Flat Bar, Angle, Tubular Steel, Hex Steel, T-Bar, and Pipe for delivery to Melvin Price Lock and Dam, East Alton, Illinois, delivery not later than 4 Feb 2005 in accordance with attached specification.

FBO DAILY ISSUE OF DECEMBER 24, 2004 FBO #1124
SOLICITATION NOTICE

95 -- ASTM A36 Steel: Plate, Flat Bar, Angle, Tubular Steel, Hex Steel, T-Bar, and Pipe for delivery to Melvin Price Lock and Dam, East Alton, Illinois, delivery not later than 4 Feb 2005 in accordance with attached specification.

Notice Date: 12/22/2004
Notice Type: Solicitation Notice
NAICS: 331111 — Iron and Steel Mills
Contracting Office: US Army Engineer District, St. Louis, ATTN: CEMVS-CT, 1222 Spruce Street, St. Louis, MO 63103-2833
ZIP Code: 63103-2833
Solicitation Number: W81C8X-4355-9896
Response Due: 1/12/2005
Archive Date: 3/13/2005
Point of Contact: Marilyn Aird, 314-331-8528
E-Mail Address: US Army Engineer District, St. Louis
(Marilyn.M.Aird@mvs02.usace.army.mil)
Small Business Set-Aside: Total Small Business
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This requirement is 100% set-aside for small businesses. The NAICS code is 331111 and the size standard is 1,000 employees. This requirement is for steel to be delivered to the U.S. Army Corps of Engineers, S&Y Area, Physical Support/Service Base, Foot of Arsenal Street, St. Louis, MO 63118, on or before 4 February 2005. Plate: 3/8 Inch Plate: ASTM A36 (Mill Test Reports Required) (8 ea): 3/8 inch x 4 FT x 8 FT (9 ea): 3/8 inch x 6 FT x 10 FT 1/2 Inch Plate: ASTM A36 (Mill Test Reports Required) (28 ea): 1/2 inch x 6 FT x 12 FT (5 ea): 1/2 inch x 4 FT x 8 FT (2 ea): 1/2 inch x 5 FT x 10 FT 5/8 Inch Plate: ASTM A36 (Mill Test Reports Required) (2 ea): 5/8 inch x 4 FT x 8 FT (2 ea): 5/8 inch x 4 FT x 10 FT 3/4 Inch Plate: ASTM A36 (Mill Test Reports Required) (4 ea): 3/4 inch x 5 FT x 10 FT (2 ea): 3/4 inch x 4 FT x 8 FT 7/8 Inch Plate: ASTM A36 (Mill Test Reports Required) (2 ea): 7/8 inch x 4 FT x 8 FT 1 Inch Plate: ASTM A36 (Mill Test Reports Required) (9 ea): 1 inch x 4 FT x 8 FT (2 ea): 1 inch x 8 FT x 20 FT (2 ea): 1 inch x 6 FT x 20 FT 1 1/2 Inch Plate: ASTM A36 (Mill Test Reports Required) (1 ea): 1 1/2 inch x 4 FT x 8 FT 2 Inch Plate: ASTM A572 GR 50 (Mill Test Reports Required) (1 ea): 2 inch x 4 FT x 8 FT (1 ea): 2 inch x 8 FT x 10 FT 2 1/4 Inch Plate: ASTM A36 (Mill Test Reports Required) (1 ea): 2 1/4 inch x 4 FT x 8 FT 2 1/2 Inch Plate: ASTM A36 (Mill Test Reports Required) (1 ea): 2 1/2 inch x 4 FT x 8 FT 3 3/4 Inch Plate: ASTM A36 (Mill Test Reports Required) (1 ea): 3 3/4 Inch x 4 FT x 8 FT Flat Bar 3/8 Inch Thick Flat Bar: ASTM A36 (Mill Test Reports Required) (4 ea): 3/8 in x 3 1/2 in x 20 FT (4 ea): 3/8 in x 2 1/2 in x 20 FT 1/2 Inch Thick Flat Bar: ASTM A36 (Mill Test Reports Required) (10 ea): 1/2 in x 6 in x 20 FT (8 ea): 1/2 in x 8 in x 20 FT (3 ea): 1/2 in x 3 in x 20 FT (10 ea): 1/2 in x 5 in x 20 FT 3/4 Inch Thick Flat Bar: ASTM A36 (Mill Test Reports Required) (4 ea): 3/4 inch x 2 1/2 in x 20 FT 2 3/4 Inch Thick Flat Bar: ASTM A240 Type 304 (Mill Test Reports Required) (2 ea): 2 3/4 in x 8 in x 20 FT Angle 1/2 Inch Thick Angle: ASTM A36 (Mill Test Reports Required) (2 ea): 1/2 in x 6 in x 6 in x 20 FT (4 ea): 1/2 in x 4 in x 4 in x 20 FT (6 ea): 1/2 in x 2 in x 2 in x 20 FT (6 ea): 1/2 in x 3 in x 3 in x 20 FT Tubular Steel (6 ea): 5/8 in x 4 in x 6 in x 20 FT Hex Stock (1 ea): 1 1/2 x 4 FT ASTM 307 (Mill Test Reports Required) (1 ea): 3/4 in x 4 FT ASTM 307 (Mill Test Reports Required) Tee - Bar: ASTM A36 (Mill Test Reports Required) (4 ea): W18 x 35 x 20 feet; Cut and Straighten for WT 9 x 35 Pipe: ASTM A36 (Mill Test Reports Required) (1 ea): Outside Diameter: 31 in, Inside Diameter: 20 in, Length 1 FT (1 ea): Outside Diameter: 31 in, Inside Diameter: 17 in, Length 1 FT Pipe: AISI 4140 Normalized (Mill Test Reports Required) (1 ea): Outside Diameter: 31 in, Inside Diameter: 17 in, Length 1 FT Pipe: ASTM A36 (Mill Test Reports Required) (1 ea): Outside Diameter: 9 in, Inside Diameter: 8 in, Length 1 FT Pipe: ASTM B148 Type 954 (Mill Test Reports Required) (1 ea): Outside Diameter: 5 in, Inside Diameter: 3 1/2 in, Length 1 FT Pipe: A53 GRD B Galvanized (Mill Test Reports Required) (3 ea): 1 1/2 in x 20 FT Pipe Schedule 40 (8 ea): 2 in x 20 FT Pipe Schedule 40 This solicitation is a Request for Quote and incorporates the following provisions and clauses that are in effect through Federal Acquisition Circular 26 dated Dec. 20, 2004: 52.212-1 Instructions to Offerors-Commercial; 52.2 12-2 Evaluation-Commercial Items (Award will be based on a combination of delivery and price); 52.212-3 Offeror Representations and Certifications(Offerors must submit a completed copy of this provision); 52.212-4 Contract Terms and Conditions-Commercial I tems; 52.212-5 Contract Terms and Conditions Required to Implement Statues or Executive Orders-Commercial Items (includes the following applicable clauses: 52.203-6 Restrictions on Subcontractor Sales to the Government, 52.219-4 Notice of Price Evaluation Preference for HUBZone , 52.219-6, Notice of Total Small Business Set-Aside, 52.219-8 Utilization of Small Business Concerns, 52.222-3 Convict Labor, 52.222-19 Child Labor, 52.222-21, Prohibition of Segregated Facilities, 52.222-26, Equal Opportunity, 52.2 22-35 Equal Opportunity for Special Disabled Veterans, 52.222-36 Affirmative Action for Workers with Disabilities, 52.222-37 Employment Reports on Special Disabled Veterans, 52.225-7001, 52.225-5, Trade Agreements, 52.225-13 Restrictions on Certain Foreign Purchases, 52.225-15 Sanctioned European Union Country End Products Supplies, 52.225-16 Sanctioned European Union Country Services Supplies, 52.232-33, Payment by Electronic Funds Transfer-CCR, 252.212-7001 Contract Terms & conditions required to impleme nt Statues or Executive Orders (includes the following applicable clauses: 52.203-3 Gratuities, 252.225-7001 Buy American Act and Balance of Payment Program, 252.225-7036 Buy American Act--North American Free Trade Agreement Implementation Act--Balance o f Payment Program, 252.232-7003 Electronic Submission of Payment Requests, 252.243-7002 Certification of Requests for Equitable Adjustment, 252.247-7023 Transportation of Supplies by Sea, 252.247-7024 Notification of Transportation of Supplies by Sea, 252. 247-7022), 252.225-7000 Buy American, 252.225-7002 Qualifying Countries as Subcontractors, 252.243-7001 Pricing of Modifications, 252.243-7002 Certification of Request for Equitable Adjustment. Quotes are due by 4:30 PM on 12 January 2005 and may be faxe d to Marilyn Aird at 314-331-8746 or sent by email to marilyn.aird@mvs02.usace.army.mil. For additional information call Contract Specialist Marilyn Aird at 314-331-8528 or Contracting Officer Gail Evans at 314-331-8522. NOTE: THIS NOTICE WAS NOT POSTED TO WWW.FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (22-DEC-2004); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
Web Link: Link to FedBizOpps document.
(http://www.eps.gov/spg/USA/USAED/CEMVS-CT/W81C8X-4355-9896/listing.html)
Place of Performance: Address: US Army Engineer District, St. Louis ATTN: CEMVS-CT, 1222 Spruce Street St. Louis MO; Zip Code: 63103-2833; Country: US
Record: SN00725610-F 20041224/041222213114 (fbodaily.com)
Source: FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

95 -- ASTM A36 Steel: Plate, Flat Bar, Angle, Tubular Steel, Hex Steel, T-Bar, and Pipe for delivery to Melvin Price Lock and Dam, East Alton, Illinois, delivery not later than 4 Feb 2005 in accordance with attached specification.