SOLICITATION NOTICE
58 -- Digital Transmitters
- Notice Date
- 1/31/2005
- Notice Type
- Solicitation Notice
- Contracting Office
- N68936 Naval Air Warfare Center Weapons Division Dept.2 429 E. Bowen Rd - Stop 4015 China Lake, CA
- ZIP Code
- 93555-6100
- Solicitation Number
- N6893603D0036
- Response Due
- 3/17/2005
- Archive Date
- 5/17/2005
- Point of Contact
- Erin Strand 760-939-7309 Mary Jacobs, Contracting Officer, 760-939-6043, mary.jacobs@navy.mil
- E-Mail Address
-
Erin Strand
(erin.strand@navy.mil)
- Description
- Modification Number N68936-03-D-0036-P00001. The Naval Air Warfare Center Weapons Division, China Lake, CA, intends to increase the maximum quantity of digital transmitters that can be ordered under Contract N68936-03-D-0036 with Emhiser Research, Verdi, NV, from 500 to 650 units. The transmitters will be used as components of a telemetry system for the Sidewinder Missile Project training rounds. The transmitters must meet the required form, fit, and function requirements of specification AS-6069A (Performance Specification Naval Air Systems Command Department of the Navy Item Specification for Transmitter, Digital) and Drawing 639AS9452D (Source Control Drawing for Transmitter, Digital) for a preexisting missile telemetry fabrication package. The transmitters shall also meet JF-12 frequency management requirements and be TEMPEST certified in accordance with NACSEM 5201. The transmitters shall be fixed-deviation telemetry transmitters operating into a nominal 50-o! hm load on a specified frequency in the ultra-high frequency (UHF) telemetry band from 2200.5 to 2259.5 megahertz (MHz). The transmitter operates on the normal aircraft or missile 28-volt-direct-current (VDC) power supply. Input to the transmitter is TTL signals at a bit rate of 1 megabit per second (Mb/s), +/-5 percent. The transmitter center frequency is selectable, to allow selection of any center frequency, in accordance with the standard bandwidth channels specified in IRIG 106. To qualify a product under Drawing 639AS9452D, a vendor shall submit four Qualification units that meet all the requirements of specification AS-6069A and Drawing 639AS9452D. The vendor must, at their own expense, submit four Qualification units, including test data, for evaluation and testing by the procuring activity. The Qualification units shall be manufactured using the same methods, materials, parts, processes, equipment and procedures proposed for production. Each Qualification uni! t shall meet all specified requirements. Failure of any Qualification unit to meet any of the requirements specified shall be cause for rejection. Respondents, other than the above, should submit, at a minimum, their qualifications and any other information considered pertinent to the requirement to the Contract Specialist within 45 days after publication. The POC for this requirement is Erin Strand, Contract Specialist, at 760-939-7309 by phone, 760-939-8329 by fax, or erin.strand@navy.mil by e-mail. All responsible sources may submit a proposal that shall be considered by the agency. Numbered Notes: 22 and 26. NAICS Code = 334220 Place of Performance = NA Set Aside= NA NOTE: THIS NOTICE WAS NOT POSTED TO WWW.FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (31-JAN-2005); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/DON/NAVAIR/dept2/N6893603D0036/listing.html)
- Record
- SN00742733-F 20050202/050131211714 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |