SOLICITATION NOTICE
J -- REPAIR F108 FUEL GEAR MOTOR
- Notice Date
- 2/11/2005
- Notice Type
- Solicitation Notice
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015
- ZIP Code
- 73145-3015
- Solicitation Number
- FA8104-05-R-0179
- Response Due
- 3/16/2005
- Archive Date
- 6/30/2005
- Description
- REPAIR F108 Bleed Valve Fuel Gear Motor SOL FA8104-05-R-0179, OC-ALC/LPKAA TINKER AFB OK 73145-3015, For additional information contact Billie Kindschuh/LPKAA/(405) 734-8107. A firm fixed-price Requirements type commercial contract is contemplated with one basic year and 4 (four) one year options for repair of F108 Bleed Valve Fuel Gear Motor. Line Item 0001: TESTING. NOUN: F108 Bleed Valve Fuel Gear Motor Input NSN 3010-01-141-5947PN, P/N: 301-774-703-0 and/or 396800-6; NSN: 3010-01-229-1008PN, P/N: 301-774-704-0 and/or 396800-7; NSN: 3010-01-367-2917PN, P/N: 301-774-705-0 and/or 396800-8. Output NSN: 3010-01-367-2917PN, P/N: 301-774-705-0 and/or 396800-8. BEQ as follows: 7 EA Basic Year; 15 EA OPT I; 18 EA OPT II; 15 EA OPT III; 15 EA OPT IV. Line Item 0002: REPAIR. NOUN, NSN and P/N same as Line Item 0001. BEQ as follows: 7 EA Basic Year; 15 EA OPT I; 18 EA OPT II; 14 EA OPT III; 15 EA OPT IV. Line Item 0003: OVERHAUL. NOUN, NSN and P/N same as Line Item 0001. BEQ as follows: 7 EA Basic Year; 14 EA OPT I; 17 EA OPT II; 14 EA OPT III; 14 EA OPT IV. Applicable to: CFM56-2B/F108 Engine. Destn: Tinker Air Force Base OK 73145-3032. Description: The F108 Bleed Valve Fuel Gear Motor is made from aluminum housings, stainless steel fittings, rubber and composite piece parts. Dimensions are: weight is dry 4.45 lbs, height 4.7 inches, depth 4.9 inches, and length 3.5 inches. Function: The fuel gear motor controls the position of engine bleed valves. The fuel gear motor is a positive displacement gear driven by high pressure fuel. It consists of two spur gears operating on needle bearings. Carbon seals provide sealing at the drive shaft. A secondary lip seal is mounted on the output shaft for further sealing. Delivery: 4 EA per month Basic Year; 4 EA per month OPT I; 5 EA per month OPT II; 4 EA per month OPT III; 4 EA per month OPT IV. Quantities shall be in any combination of Line Items 0001, 0002, 0003. Qualification requirements: Sources must be qualified prior to being considered for award. Qualification requirements are available for this acquisition. These qualification requirements apply to all line item(s). The approximate solicitation issue date is 02 MAR 2005 and the estimated solicitation response date will be 16 MAR 2005. The anticipated award date will be 31 MAR 2005. Electronic procedures will be used for this solicitation through FedBizOpps at http://www.eps.gov/. Approved Source is Argo-Tech Corp. 23555 Euclid Avenue, Cleveland, OH 44117. All responsible sources solicited may submit a bid, proposal, or quotation that shall be considered. Award will be made only if the offeror, the product/service or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within thirty days after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. Please contact: OC-ALC/BC, ATTN: Source Development Office, 3001 Staff Dr Ste 1AG85A, Tinker AFB OK 73145-3009 in writing for further information concerning the source approval process. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requests can be submitted to OC-ALC/LPKAA, Tinker AFB OK 73145-3015, FAX Number (405) 7349-8106. Request for Written Proposal will be posted to FedBizOpps. See Note (s) 23.
- Record
- SN00749946-W 20050213/050211211944 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |