Loren Data's SAM Daily™

FBO DAILY ISSUE OF MARCH 09, 2005 FBO #1199
SOLICITATION NOTICE

C -- INDEFINITE DELIVERY, INDEFINITE QUANTITY CONTRACT (S) GENERAL DESIGN SUPPORT SERVICES PRIMARILY WITHIN THE LIMITS OF THE NEW ORLEANS DISTRICT

Notice Date

3/7/2005
 

Notice Type

Solicitation Notice
 

NAICS

541330 — Engineering Services
 

Contracting Office

US Army Engineer District, New Orleans, ATTN: CEMVN-CT, P.O. Box 60267, New Orleans, LA 70160-0267
 

ZIP Code

70160-0267
 

Solicitation Number

W912P8-05-R-0020
 

Response Due

4/7/2005
 

Archive Date

6/6/2005
 

Small Business Set-Aside

N/A
 

Description

I. CONTRACT INFORMATION: This contract is being procured in accordance with the Brooks A-E Act as implemented in FAR Subpart 36.6. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. Nort h American Industrial Classification System NAICS Code is 541330, which has a size standard of $4.0 million in average annual receipts. To be eligible for contract award, a firm must be registered in the Department of Defense (DoD) Central Contractor Regi stration CCR via the CCR Internet site at http://www.ccr.gov or by contacting the DoD Electronic Commerce Information Center at 1-800-334-3414. An Indefinite Delivery Indefinite Quantity IDIQ type contract will be negotiated and awarded with a base period not to exceed one year and two option periods not to exceed one year each. Multiple contracts may be awarded. Anticipated award date is in or about July 2005. Contract ceiling will not exceed $1,000,000 per year with the two option years for an addition al amount of $1,000,000 for each option year, not to exceed a total of three years or $3,000,000. The Government reserves the right to exercise the contract options before the expiration of the base contract period or preceding option period, if the contr act amount for the base period or preceding option period has been exhausted or nearly exhausted. Work will be assigned by negotiated task orders. This announcement is open to all businesses regardless of size. If a large business is selected for this cont ract it must comply with FAR 52.219-9 regarding the requirement for a subcontracting plan for work it plans to subcontract. The plan is not required with this submittal. The primary purpose of this proposed contract is to provide services for projects loca ted within the geographic boundaries of the New Orleans District. Secondarily, this contract may be used to provide services within the geographic boundaries of any other U.S. Army Corps of Engineers District. The contractor will have the right to refuse o rders for services to be performed outside the geographic boundaries of the New Orleans District. II. PROJECT INFORMATION: 1. The work may involve investigations, comparisons, data evaluations, analysis, design, technical writing, and CADD drafting for design reports, feasibility studies, plans and specifications or other engineering documents. Surveying and the use of aerial mapping are required to support this work. 2. The work may involve the following disciplines: Structural, Civil, Geotechnical, Hydraulic, Mechanical, Electrical and Cost Engineering, Architecture, Landscape Architecture and Surveying. 3. The work may involve the following types of projects, and work may involve new or existing structures: Hydraulic structures such as locks, floodgates, flood control structures, floodwalls, levees, navigation structures, drainage canals and structures, p restressed and post tensioned concrete structures, pumping stations; marine structures such as bulkheads, dolphins, fenders, guide walls, jetties; highway work such as roads, culverts and bridges; and buildings such as warehouses, pump houses, or offices r elated to the structures above. 4. The work may involve the following types of related work: site layout, development of real estate rights-of-way drawings, architectural treatments, landscaping, perform soil borings and soil tests to determine soil properties in accordance with the Corp s` geotechnical criteria, pile capacity curves, soil pressures, seepage and dewatering analysis, stability analysis, surveys and the use of aerial photographic coverage to locate features and develop topographic maps, contour maps, profiles and sections, b oth land based and hydrographic. 5. The instrumentation and evaluation work may involve the following: a. Surveying and instrumentation data gathering for specific features of existing civil works structures such as survey cross sections and profiles, settlement mark readings, joint movement readings, joint alignment readings and piezometer readings. The surveys may include hydrographic, overbank, horizontal distances and control data. Firms must indicate their capability of utilizing Global Positioning Systems G PS and total stations with a data collector system. b. Compiling the field data into the appropriate digital format for use in various software e.g. government provided data collector program, government provided cross section plot program, Excel spreadsheet with graphics; c. Producing CADD and Excel plots and plates from the compiled data; d. Analyzing the field data and preparing instrumentation evaluation reports with photos and documentation of the site visit by Engineers. III. SELECTION CRITERIA: The selection criteria are listed below in order of precedence. Criteria 1 thru 5 are primary. Criteria 6, 7 and 8 are secondary and will be used only as `tie-breakers` among technically equal firms. l. Specialized experience and technical competence of the firm and its key personnel to perform the services and produce the engineering documents listed in paragraph 2 above. 2. Professional qualifications of the key design personnel, including professional registration in engineering, architecture and surveying, available to work on this contract in the following disciplines: Structural Engineering, Civil Engineering, Hydrauli c Engineering, Geotechnical Engineering, Mechanical Engineering, Electrical Engineering and Cost Engineering; Architecture, Landscape Architecture, Surveying and CADD technology. 3. Capacity -personnel and equipment- to perform the work in the required time using all of the latest versions of commercial and Corps software packages utilized by the Corps; produce CADD drawings in the MicroStation format; perform soil borings and soil testing and analysis in accordance with the Corps` geotechnical criteria; perform land based and hydrographic surveys; and provide the following minimum personnel: two structural engineers, four civil engineers, two geotechnical engineers, one hydraulic e ngineer, one cost engineer, one electrical engineer, one mechanical engineer, one architect, one landscape architect, one registered land surveyor and three CADD technicians, two 4-person survey parties and one computer technician. 4. Knowledge of geographic area. 5. Past performance on Department of Defense and other contracts with respect to cost control, quality of work and compliance with performance schedules. 6. Location of the design firm in the general geographical area of the New Orleans District. 7. Extent of participation of small businesses, small disadvantaged businesses, women-owned small businesses, veteran-owned small businesses, service-disabled veteran-owned small businesses, HUBZone small businesses, historically black colleges and univers ities, and minority institutions on the proposed contract term as measured as a percentage of the estimated effort. 8. Volume of DoD A-E Contract Awards in the last 12 months with the objective of affecting an equitable distribution of DoD A-E contracts among qualified firms, including SB and SDB. IV.SUBMISSION REQUIREMENTS: Interested firms, which meet the requirements described in this announcement, are invited to submit 5 copies of SF 330 - SF 330 replaced both SF 254 and SF 255 which are no longer accepted - for the prime firm and all subcontra ctors and consultants to the address below not later than 4:30 p.m. on the 30th day after the date of publication of this announcement. If the 30th day is a Saturday, Sunday or a Federal holiday, the deadline is the close of business of the next business d ay. Include the firm`s ACASS number in SF 330, Block H. For ACASS information, call 503-326-3459. In Block E of the SF 330, include an organizational chart, equipment requirements, and the use of subcontractors or consultants and describe the firm`s design quality control plan, including coordinatio n of subcontractors and consultants. Complete Safety Plan will be required after contract award. Safety performance data - person-hours lost - must be submitted including data for any subcontractors. A detailed Quality Control Plan must be received and ap proved by the Government prior to contract award. For Overnight or courier deliveries, the physical address is U.S. Army Engineer District, New Orleans, 7400 Leake Avenue, ATTN: CEMVN-CT-E, Aline Smith, Room 184, New Orleans, LA 70118-1030. This is not a Request for Proposal. Refer to Solicitation No. W912P8-05-R-0020.
 

Place of Performance

Address: US Army Engineer District, New Orleans ATTN: CEMVN-CT, P.O. Box 60267 New Orleans LA

Zip Code: 70160-0267

Country: US
 

Record

SN00763930-W 20050309/050307211917 (fbodaily.com)
 

Source

FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |