SOURCES SOUGHT
43 -- 600 GPM Aviation Jet Fuel Two-Stage Filter/Separator
- Notice Date
- 3/23/2005
- Notice Type
- Sources Sought
- NAICS
- 339999
— All Other Miscellaneous Manufacturing
- Contracting Office
- Department of the Navy, United States Marine Corps, Marine Corps Systems Command, 2200 Lester Street, Quantico, VA, 22134-5010
- ZIP Code
- 22134-5010
- Solicitation Number
- RFI-M67854-05-R-5070
- Response Due
- 4/4/2005
- Archive Date
- 4/19/2005
- Description
- The United States Marine Corps is seeking information for a commercial 600-Gallon Per Minute (GPM) Aviation Jet Fuel Two-Stage Filter/Separators. The key capabilities that the offerors must address include the following thresholds: Capable of removing undissolved water and solid contaminants from aviation jet fuels. Be able to operate with current Marine Corps tactical fuel systems using four-inch Camlock inlet and outlet fittings in accordance with A-A-59326. Capable of maintaining continuous maximum flow rate of 600-GPM and must be in compliance with American Petroleum Institute Specification 1581 (latest edition). The 600-GPM Aviation Jet Fuel Two-Stage Filter/Separator Assembly must comply with all current commercial standards and guidelines; Operate within a four-inch tactical hose line with a safe working pressure of 150 PSI and a minimum burst pressure of 600 Pounds Per Square Inch (PSI); Have a minimum flow rate of 50 GPM; Operate with all commercial and military aviation turbine fuels; Incorporate a visible pressure-monitoring device so the operator may observe differential pressure across the filter separator; not to exceed a maximum weight of 450 lbs; Not to exceed a maximum height of 55 inches; Not to exceed a maximum width of 44 inches; Not to exceed a maximum length of 82 inches; Capable of operating in climates such as arctic, tropical, and desert with a minimum temperature of minus 25 degrees Fahrenheit and a maximum temperature of 140 degrees Fahrenheit; Have an attached grounding rod and grounding cable for earthen grounding; One extra set of elements and complete set of gaskets/o-rings shall be furnished with each Filter Separator Assembly; Have a skid assembly and/or protective cage assembly to prevent damage during embarkation and operation; Capable of being transported and withstand military type transport in accordance with MIL-STD-810 or Commercial Equivalent; Color of the Pressure Regulators shall be available in two-color variants: Green 383, color chip number 34094 or Desert Tan 686A, color chip number 33446, in accordance with Mil-Std- 595 or Commercial Equivalent. Firms, which have products with the above capabilities, are invited to submit the following information within their capability statement: 1) Product summary, 2) Complete technical characteristics and test data of their product, 3) Pictures/drawings of the product, 4) Contract Logistics Support (CLS), 5) Unit price and production schedule for quantities of 1, 100, 300, and 500 units. 6) Corporate history including previous DOD experience if applicable. Responses will be reviewed to identify firms potentially capable of fulfilling the Governments requirements. Vendors are requested to submit their Capability Statement to the address below no later than 4 April 2005. E-mail responses will be accepted. This sources sought / Request For Information (RFI) is for planning purposes and shall not be construed as a Request For Proposal or as an obligation on the part of the Government to acquire follow-on-acquisition. The Government does not intend to award a contract on the basis of this RFI, or otherwise pay for the information requested. No entitlement to payment of direct or indirect costs or charges by the Government will arise as a result of submission of responses to this RFI and Government use of such information. The Government recognizes that proprietary data may be part of this effort. If so included, clearly mark such restricted or proprietary data and present is as an addendum to the non-restricted / non-proprietary information. NO SOLICITATION DOCUMENT EXISTS AT THIS TIME. Responses to this RFI shall be mailed to Commanding General, MARCORSYSCOM, Attn: Capt Juan Arratia, CONTRACTING OFFICER (Code GTES/PG15), 2200 Lester Street, Quantico, VA 22134. For further information regarding this RFI or submission of materials, contact the Contracting Officer at (703)432-3705, fax (703)432-3532, and email juan.arratia@usmc.mil.
- Place of Performance
- Address: Bldg 2200 Lester Street, Quantico VA
- Zip Code: 22134
- Zip Code: 22134
- Record
- SN00775024-W 20050325/050323213632 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |