SOLICITATION NOTICE
C -- Multi-Discipline Indefinite Delivery Indefinite Quantity (IDIQ) Contract for Architect-Engineer (A-E) Services
- Notice Date
- 11/19/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Air Force, Air Combat Command, 4 CONS, 1695 Wright Brothers Ave, Seymour Johnson AFB, NC, 27531
- ZIP Code
- 27531
- Solicitation Number
- FA4809-04-R0003
- Response Due
- 12/18/2003
- Point of Contact
- Schondra Richardson, Contract Specialist, Phone 919-722-5409 ext.255, Fax 919-722-5404, - Imelda Reantaso, Contract Specialist, Phone 919-722-5409 ext 250, Fax 919-722-5404,
- E-Mail Address
-
schondra.richardson@seymourjohnson.af.mil, imelda.reantaso@seymourjohnson.af.mil
- Description
- This request is being solicited on an unrestricted base. This is an Architect-Engineer (A-E) service acquisition for a firm-fixed price indefinite delivery, indefinite quantity (IDIQ) contract for a base period of one year and two option periods of one year each. The NAICS Code is 541330. A-E services are required for the preparation of estimating and programming, development of plans, specifications and cost estimates suitable for bidding and repairs, renovations, alterations, upgrades, possible replacement (new construction), and associated demolition work for various projects at Dare County Bomb Range, Fort Fisher and Seymour Johnson AFB in NC. A-E services for these projects will be accomplished under Task Orders written against the IDIQ contract. Construction cost ranges for these projects vary; however, it is not contemplated that the cost range for any individual job will exceed $10,000,000. The selected A-E firm(s) will be required to participate in an orientation, scope of work and site visit meetings (when requested) within 7 calendar days after receiving the request for proposal for a project. The fees under the IDIQ contract will not exceed $750,000 for any base or option period with the maximum task order amount of $299,000. The guaranteed minimum for the IDIQ contract is $10,000. The work involved is multi-disciplined and includes, but is not limited to architectural, structural, civil, environmental, electrical, fire protection and mechanical requirements. Field surveying, landscaping design, and architectural rendering capabilities may be required. Familiarity with English and metric system of measurements is required. Disciplines and capabilities may be represented within the same firm or with consultants that regularly work with the primary firm. The firm(s) must provide part-time and/or full-time on-site project specific construction inspection, contract administration and field engineering services. The firms(s) must provide full and/or part-time on-site design and plan review by professional engineers and/or architects on an as-needed basis. All drawings must be formatted in AUTOCAD Release 2000 or higher. Documentation shall be furnished with each drawing file detailing level layer usage, and scale information for drawings. Each final drawing shall be provided on CD-ROM, formatted for the Windows operating system. The firm(s) shall also be able to obtain MaxView/SourceView software and convert drawing files formatted for electronic posting over the Internet. Each converted drawing file shall be provided on CD-ROM, formatted for the Windows operating system. Firms are reminded of the requirement in FAR 36.601-3(a), which states that the construction design specifications shall require the maximum practicable use of recovered materials considering the performance requirements, availability, price reasonableness, and cost-effectiveness. The possibility of hazardous materials, i.e., asbestos, lead paint, and other materials may exist at project sites. All hazardous materials licenses and/or accreditations necessary for the locality of the project site are required by the A-E firm(s) or their sub-contractors. The general intention is to provide for such design and engineering services as necessary to support the procurement of construction requirements/ acquisitions. For the Government to retain maximum flexibility in the interest of their clients, various services/products, such as technical reports, studies, site investigations, concept designs, cost estimates, surveys, shop drawings reviews, construction consultation and inspection, Title II, preparation of construction record drawings, and O&M manuals, may be required at any time up to final acceptance of all work. Because the IDIQ contract could eventually result in an award over $500,000, a subcontracting plan will be required by large business concerns. All contractors are required to be registered in the Central Contractor Registration (CCR) database prior to receiving a contract award. B. SELECTION CRITERIA: Selection criteria to be utilized are listed in the relative order of importance as follows: 1. Specialized experience and technical competence in the type of work required, including experience in energy conservation, pollution prevention, waste reduction and the use of recovered materials; 2. Professional qualifications of key personnel of the A-E firm and consultants, including sub-contractors, and the proposed project team (the team/office actually accomplishing the work) in providing complete architectural services with multi-disciplinal engineering support services for the design methods and design requirements, employs or has consultant for the following: Architects, Structural, Civil, Environmental, Mechanical, and Electrical Engineers, Landscape Designers, Registered Surveyors and Fire Protection Specialists; 3. Professional capacity to complete projects within the established time limits, meeting project dollar thresholds, and current work load; 4. Ability to provide part-time and/or full-time on-site project specific construction inspection, contract administration and field engineering. Ability to provide full and/or part-time on-site design and plan review by professional engineers and/or architects on an as-needed basis. 5. Past performance of the A-E firm (and their sub-contractors) in their quality control/quality assurance program to assure coordinated technically accurate Request for Proposal (RFP) or Invitation for Bid (IFB) documents, plans, specifications, and construction cost estimates for the Air Force or other Governmental agencies; 6. Historical dollar value and magnitude of requirements performed; 7. Demonstrated capacity of preparing drawings on Computer Assisted Design Drawings (CADD); 8. Geographic proximity to Seymour Johnson AFB NC which is located in Goldsboro NC; 9. Volume of DoD contracts awarded in the previous 12 months. It is estimated that this contract will be awarded in the third quarter of Fiscal Year 2004. C. REQUIRED DOCUMENTS: Interested firms which meet the requirements described in this announcement, are invited to submit two copies (1 original and 1 copy) of their completed Standard Form (SF) 254, Architect-Engineer and Related Services Questionnaire and SF 255, Architect-Engineer and Related Services Questionnaire for Specific Project. Limit your SF 254 and SF 255 along with supporting data for a total package of not more than 50 pages, 8 ½ x 11 paper, 12 pitch. Experiences identified in Block 8 shall not be more than 3 years old. Include at least two designs in Block # 8 of the SF 255 that have been in the state of North Carolina or its surrounding states. All information relating to the firm(s) qualifications must be contained in the standard forms. Inclusion by reference to other material is not acceptable. Firms responding to this announcement by the closing/response date will be considered for selection. This is not a request for proposal. Two awards may be made from this notice. Fax copies will not be accepted. Identify submittal with FA4809-04-R0003 and address to: 4th Contracting Squadron/LGCA, 1695 Wright Brothers Avenue, Seymour Johnson AFB, NC 27531, ATTN: Schondra Richardson. Primary POC is Ms Richardson at (919) 722-5409; e-mail: schondra.richardson@seymourjohnson.af.mil NOTE: THIS NOTICE MAY HAVE POSTED ON WWW.FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (19-NOV-2003). IT ACTUALLY APPEARED OR REAPPEARED ON THE FEDBIZOPPS SYSTEM ON 12-APR-2005, BUT REAPPEARED IN THE FTP FEED FOR THIS POSTING DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/USAF/ACC/4CONS/FA4809-04-R0003/listing.html)
- Place of Performance
- Address: Seymour Johnson AFB NC
- Zip Code: 27531
- Country: USA
- Zip Code: 27531
- Record
- SN00786346-F 20050414/050412212011 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |