SOLICITATION NOTICE
46 -- Sewage Grinder
- Notice Date
- 5/13/2005
- Notice Type
- Solicitation Notice
- NAICS
- 333512
— Machine Tool (Metal Cutting Types) Manufacturing
- Contracting Office
- International Boundary and Water Commission, Information Management Division, Acquisition Division, 4171 North Mesa, Suite C-310, El Paso, TX, 79902
- ZIP Code
- 79902
- Solicitation Number
- IBM05Q0020
- Response Due
- 5/27/2005
- Archive Date
- 6/11/2005
- Small Business Set-Aside
- Total Small Business
- Description
- The United States Section of the International Boundary and Water Commission has a requirement for two (2) Moyno Grinders, NSN # 0990-M04F, or equivalent with the following specifications. Four (4) inch flange mounted inline sewage grinder with a maximum capacity of 45 GPM to be used in the processing of wastewater. The grinders are to be installed in conjunction with a pumping station, ten feet below grade onto present piping. Depth cannot exceed twenty (20) inches. Installation is not required. Grinder construction shall consist of the following main components: Main housing, twin Shaft with cutters and spacer/cutters and a drive assembly. The cutter and drive assembly shall be of the two-shaft design and be capable of continuous operation, processing wet and dry. Single-shaft devices utilizing a single rotation cutter bar with stationary cutters shall not be acceptable. The motor is to be TEFE Design, 3 H.P., 1750 RPM, 3 phase, 240/480 volts, 60 hertz with an automatic controller to sense overload and reverse rotation of the cutters to clear object. Motor controller hardware: U.L. approved enclosure, NEMA 4 fiberglass reinforced polyester. Indicator lights for line active, overload and run conditions. Momentary contact push-button switches to perform start and stop reset operations. Overload terminals shall be provided for remote, overload and /or alarm indication. Estimated issuance and closing date of RFQ IBM05Q0020 is June 6, 2005 and June 17, 2005 respectively. Delivery is to the IBWC, Nogales Field Office located at 865 Rio Rico Industrial Park, Rio Rico, AZ 85648. The estimated price range for this requirement is between $25,000.00 and $100,000.00. Requests for RFQ IBM05Q0020 must be submitted in writing to the International Boundary and Water Commission, United States Section, 4171 N. Mesa, Bldg. C-100, El Paso, TX 79902, facsimile to 915/832-4192 or e:mail message to doloreshinton@ibwc.state.gov. No telephone requests will be accepted. Requests must include business name, point of contact, address, telephone number (include area code) and RFQ number. This requirement is a 100% set-aside for small business concerns. The North American Industry Classification system (NAICS) Code is 333512. The applicable small business size standard is 500 employees. Original Point of Contact: Dolores Hinton, Contract Specialist, Phone 915/832-4120, Fax (915) 832-4192, Email: doloreshinton@ibwc.state.gov
- Place of Performance
- Address: International Boundary and Water Commission, Nogales Field Office, 865 Rio Rico Industrial Park, Rio Rico, AZ
- Zip Code: 85648
- Country: USA
- Zip Code: 85648
- Record
- SN00807881-W 20050515/050513213357 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |