SOLICITATION NOTICE
16 -- Repair of Horizontal Stabilizer Assy.
- Notice Date
- 6/15/2005
- Notice Type
- Solicitation Notice
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- DHS - Direct Reports, United States Coast Guard (USCG), Commanding Officer, USCG Aircraft Repair & Supply Center, HU25, HH65, H60J, C130, EISD, 130J or Support Procurement Building 79, 75, 79, 78, 78, 19 or 63, Elizabeth City, NC, 27909-5001
- ZIP Code
- 27909-5001
- Solicitation Number
- HSCG38-05-Q-100039
- Response Due
- 6/30/2005
- Archive Date
- 7/15/2005
- Description
- THIS IS A PRESOLICITATION NOTICE ONLY AND NOT A SOLICITATION OR REQUEST FOR QUOTE (RFQ) DOCUMENT. THE RFQ/SOLICITATION PACKAGE WILL BE AVAILABLE AFTER THE CLOSING DATE OF THIS PRE-SOLICITATION NOTICE. QUOTES ARE NOT BEING SOLICITED OR ACCEPTED AT THIS TIME. CONTRACTORS SHOULD FOLLOW THE INSTRUCTIONS BELOW. The U.S. Coast Guard Aircraft Repair and Supply Center (ARSC) intends to issue a Purchase Order using Simplified Acquisition Procedures (incorporating the latest FAC, FAC 05-03) for the Repair of (2) each Horizontal Stabilizer Assembly, PN# MY20331-16 NSN: 1560-14-477-2081. These items are Flight Critical to the mission of the USCG, and ACMS Tracked. Return to Service Repair IAW Attached Statement of Work (see below). ALL OEM SERVICE BULLETINS PREVIOUSLY INCORPORATED SHALL REMAIN INCORPORATED.SERVICE BULLETINS THAT UPGRADE THE COMPONENT OR IMPROVE RELIABILITY SHALL BE INCORPORATED UPON APPROVAL OF THE USCG?S CONTRAVTING OFFICER. The OEM for PN# MY20331-16 is Cage Code F6117 Dassault Aviation. The Coast Guard does not own nor can it obtain specifications, drawings, plans or other technical data for repair. The Statement of Work will be available as part of the Request For Quote (RFQ). Requests for specifications, drawings, etc. will be disregarded. The RFQ document, HSCG38-05-Q-100039, will be available for downloading from FedBizOps at www.eps.gov or can be obtained by faxing or E-mailing a written request to (252) 334-5427 (FAX) jalassiter@arsc.uscg.mil (e-mail address). Contractors shall be able to download, print, and E-mail the RFQ from the FedBizOps website. The RFQ/solicitation will be available for download after the closing date (Due Date or Response Date shown above) with an anticipated award date of July/15/2005. This date is approximate and not exact. Contractors are encouraged to register and use FedBizOps and can call Jim Lassiter, Purchasing Agent at (252) 335-6143 for assistance. The North American Industry Classification Standard (NAICS) is 336413 and the size standard is 1000 employees to classify as a small business. This is THIS IS AN UNRESTRICTED PROCUREMENT. All responsible sources may submit a quotation, which shall be considered by the agency. Sources must have valid Cage Codes and DUNs Numbers or have the ability to obtain one, also be registered in CCR (Central Contractors Registration). Quotes may be F.O.B. Origin or F.O.B. Destination (F.O.B. Destination is preferred) and will be evaluated on the basis of best value to the government considering technical acceptability, price, delivery and past performance and quality and price realism. Desired delivery 60 days after receipt of material, required delivery date is 90 days after receipt of material. Packaging instructions will be specified in the RFQ/solicitation. Delivery shall be to U.S.C.G. Aircraft Repair and Supply Center, Elizabeth City, NC 27909 Attn: Receiving and/or Quality Assurance Section. See Numbered Note 26. U.S. COAST GUARD HU25 HORIZONTAL STABILIZER STATEMENT OF WORK 27 SEPT 04 1.0 BACKGROUND The U.S. Coast Guard currently operates twenty (20) HU-25 aircraft manufactured between 1982 and 1984 by Dassault-Breguet Aviation SA-Avions Marcel. These aircraft are used differently from general aviation as HU-25 missions frequently operate within salt-laden environments. This condition accelerates the corrosive attack to the HU-25?s horizontal stabilizer (P/N MY20164-3, MY20331-16). 2.0 OBJECTIVE 2.1.1. The Coast Guard?s objective is to obtain services of a Federal Aviation Administration (FAA) authorized repair center to effectively repair and provide a complete, ready-to-install HU-25 horizontal stabilizer assembly. The repaired horizontal stabilizer must meet the OEM?s critical profile and dimensions to ensure the fit to aircraft with minimal adjustment during installation. In addition, corrosion preventative steps shall be incorporated during repair. 2.1.2. The Coast Guard anticipates two levels of horizontal stabilizer repair. First, a ?return to service repair? would be required for a stabilizer that is subject to limited damage, such as exterior corrosion or impact damage, replacement of bushings and hardware. Second, ?extensive repair? would be required for a stabilizer that is beyond the scope of a return to service repair and would include the replacement of skins, major extrusions, and fittings. The quoter shall provide a cost break down for inspection, parts and labor. At a minimum, these two levels of service should be addressed in the quote. Quoters may submit additional levels of service. 3.0 To meet the Coast Guard?s objectives the quoter will be required to meet the following technical criteria: 3.1. The quoter is responsible for all necessary functions to perform services requested. This includes, but is not limited, original Manufacturer?s drawings and specifications, required tooling, test equipment, parts, material, engineering services, management, maintenance, preservation, storage, shipping, etc., to repair/overhaul horizontal stabilizers. 3.2. Either possess or show ability to obtain adequate technical data, tooling and fixtures to meet the OEM?s critical profile and dimensions. 3.3. Past Performance. 3.3.1. Provide documentation for having performed repair/overhaul of similar or like items. 3.3.2. Provide Points of Contact for past performance documentation for the past two years. Include references? name, company, phone number, and e-mail address 3.3.3. Provide evidence of and ability to maintain a Quality System acceptable to the Coast Guard. 3.0 APPLICABLE DOCUMENTS The following Technical Specifications are applicable: a. OEM : 1. MY20331-16 drawings 2. Falcon 20 Maintenance Manual , PUB: 067P, Chapter 55 3. F20/F200 Structural Repair Manual b. CG Technical Orders Horizontal Stabilizer: 1. CGTO 1U-25A-3 (Structural Repair Manual) 2. CGTO 1U-25A-4, Chapters 55 (Illustrated Parts Catalog) e. Data Availability: 1. OEM drawings and specifications are proprietary and cannot be provided by the Coast Guard. 2. Coast Guard specific CGTOs can be acquired through the Freedom of Information Act FOIA).Submit a written request to: Commanding Officer Attn: ARSC FOIA Officer United States Coast Guard Aircraft Repair & Supply Center Elizabeth City, NC 27909
- Record
- SN00829990-W 20050617/050615211529 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |