Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF JUNE 26, 2005 FBO #1308
SOURCES SOUGHT

43 -- Pump Rehabilitation

Notice Date
6/24/2005
 
Notice Type
Sources Sought
 
Contracting Office
Bureau of Reclamation - Central California Area Office (CCAO) 7794 Folsom Dam Road Folsom CA 95630
 
ZIP Code
95630
 
Solicitation Number
05SQ241619
 
Response Due
7/5/2005
 
Archive Date
6/24/2006
 
Small Business Set-Aside
Total Small Business
 
Description
NAICS Code 333911. This is a Sources Sought Notice requesting small businesses capable of providing parts and service for pump rehabilitation. The pump was manufactured by Worthington Pump and Machinery Corporation, is a Model 16-LA-2. Its capacity is 9,000 GPM at 100 feet of head. The pump rehabilitation shall consist of the providing new case wear (seal) rings; machining the rotating seal rings; providing and installing new shaft packing sleeves with o-ring grooves; providing and installing new shaft sleeve o-rings; providing and installing new shaft sleeve nuts; recontour the impeller; and balancing the rotating assembly. New shaft packing sleeves, sleeve nuts, and o-rings shall be provided. The packing sleeves shall be manufactured with o-rings grooves. The packing sleeves shall be installed with o-rings to prevent the entrance of water under the sleeve. The impeller shall be recontoured as necessary and the water flow area coated with "Belzona" material. The minimal skim cut necessary shall be removed from the impeller wear rings to clean them up. After the rotating assembly is rehabilitated it shall be dynamically balanced. New case wear rings shall be fabricated per Worthington Pump and Machinery Corporation model 16-LA-2 drawings with an outside diameter equivalent to the existing case wear rings and an inside diameter equivalent to the measured impeller wear ring diameter after machining plus the diametric clearance recommended by the Worthington design. Fits and surface finish shall be to within Worthington Pump and Machinery Corporation model 16-LA-2 drawing requirements. Material shall be in accordance with Worthington Pump and Machinery Corporation model 16-LA-2 drawing requirements. Prospective vendors must be registered in the CCR database, http://www.ccr.gov prior to award of contract. Failure to register in CCR will make an offeror ineligible for award. If you are interested in this requirement, please indicate your interest by e-mail to: Marie Spurgeon, Purchasing Agent, (mspurgeon@mp.usbr.gov) no later than July 5, 2005. Qualified responders will receive a more detailed description of requirements on which to base a preliminary estimate of cost and pricing.
 
Web Link
Please click here to view more details.
(http://ideasec.nbc.gov/j2ee/announcementdetail.jsp?serverId=BR142520&objId=144371)
 
Place of Performance
Address: U.S. Bureau of Reclamation 7794 Folsom Dam Road Folsom, CA
Zip Code: 95630
Country: US
 
Record
SN00836349-W 20050626/050624212337 (fbodaily.com)
 
Source
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.