Loren Data's SAM Daily™

FBO DAILY ISSUE OF JULY 08, 2005 FBO #1320
SOLICITATION NOTICE

41 -- Combined Synopsis/Solicitation for Environmental Weather Chamber

Notice Date

7/6/2005
 

Notice Type

Solicitation Notice
 

NAICS

333415 — Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing
 

Contracting Office

U.S. Army Field Support Command, ATTN: AMSFS-CCA, Rock Island, IL 61299-6500
 

ZIP Code

61299-6500
 

Solicitation Number

W52P1J05T0008
 

Response Due

7/13/2005
 

Archive Date

9/11/2005
 

Small Business Set-Aside

Total Small Business
 

Description

It is anticipated that firm-fixed priced, competitive purchase order(s) will be issued for the procurement of an Environmental Weather Chamber to precondition packages prior to testing and for conducting rain testing. Preconditioning of) packages will be per ASTM D4169-04a i.e. temperature required of 73.4 +/- 2 degrees Fahrenheit and relative humidity of 50 +/- 2 percent relative humidity. This chamber also must comply with the temperature and spray requirements spelle d out in section 15 of ASTM D4169 and automatically cycle thru Assurance Level 1 specifications without operator input and have a temperature range of -10 to +130 degrees f. with a rain fall of 4 +1 inch of rain per hour. The chamber will be located in an indoors test lab that normally has an ambient temperature of 70 +/- 5 degrees Fahrenheit with a humidity of 20 to 80% relative humidity. ASTM D4169 is will be made available, by request to the Contract Specialist. Power requirements for the chamber are 3 phase 480 volts. Preferred design is a single Environmental Weather Chamber unit containing the Chamber Housing, Rain Producing Equipment, Air Conditioning, and Pre-Conditioning components in one package. However, alternative approaches will be considered for individual c omponents, at the CLIN level specified below. In addition, a single Air Conditioning component and Pre-Conditioning component is preferred. CLIN 0001-Chamber Housing CLIN 0002-Rain Producing Equipment CLIN 0003-Air Conditioning component CLIN 0004-Pre-Conditioning component CLIN 0001-Chamber Housing Requirements: The Chamber Housing must have the dimensions of 7ft 6in wide by 8ft deep by 8ft high and meet the following specifications: Exterior Dimensions: Width 90in maximum, Depth 96in minimum, Height 96in minimum Exterior Color: Medium Blue(preferred) Insulation: 4in minimum Exterior Sheathing: None Corroding Metal or plastic/fiberglass Interior Sheathing: None Corroding Metal Interior Sealing: Moisture/Air Resistance Door Size: Height 78in minimum, Width 48in minimum, Window(In Door)Height 12in minimum, Width 12in minimum Light (On Ceiling or wall): Water Proof
 

Place of Performance

Address: U.S. Army Field Support Command ATTN: AMSFS-CCD-B (J. Dobbeleare) Rock Island IL

Zip Code: 61299-6500

Country: US
 

Record

SN00842144-W 20050708/050706212201 (fbodaily.com)
 

Source

FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |