SOLICITATION NOTICE
66 -- RePost: Near Infrared (NIR) Camera Systems with Large Format Black Body Calibration (End User US Army - Picatinny Arsenal)
- Notice Date
- 8/15/2005
- Notice Type
- Solicitation Notice
- Contracting Office
- 26 Federal Plaza, New York, NY 10278
- ZIP Code
- 10278
- Solicitation Number
- 02PA215417-01
- Response Due
- 8/18/2005
- Archive Date
- 9/7/2005
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number is 02PA215417-01 and is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 05-03 dated 4/11. The associated North American Industrial Classification System (NAICS) code for this procurement is 339111 with a small business size standard of 500 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit a quote. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on Thursday, August 18, 2005 at 16:00:00 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Picatinny Arsenal, NJ 07806 The GSA FTS Region 2 requires the following items, BRAND NAME OR EQUAL, to the following: LI 001, Near Infrared (NIR) Camera Specifications: Detector: Indium Gallium Arsenide; Bandwidth: 0.9 to 1.7 microns; Resolution: 640 X 512 pixels; Integration Time:3 micro-seconds to full frame; Sensor Cooling: Thermo-electric stabilization; Lens Mount: FD mount optical interface; Power Dissipation: <25 Watts steady state; Noise Equivalent Irradiance: Low Gain = <1.5E-7W/sq cm - High Gain = <3E-10W/sq cm; Dynamic Range: 14 bits; Operational Temp Range: -20 to +60 degrees C; Non-Operational Temp Range: -55 to +80 degrees C; Includes Real Time Imaging Electronics; Includes mounting in environmental enclosure for continuous outdoor use, 1, EA; LI 002, Custom IR DFOV Lens: Custom DFOV lens with Spectral response to 1.7 microns. SPECIFICATIONS: 1) Pass band: 0.9 to 1.7 microns; 2) FOV: 2 ? 10 degrees; 3) Housed in environmental enclosure; 4) Auto Controlled., 1, EA; LI 003, Fixture to integrate with existing IR camera positioner: Boresight mount with hooop assembly to support mounting and alignment on the MVSP two axis gimbal or tripod., 1, EA; LI 004, Heavy duty tripods for portable use, 2, EA; LI 005, External Power Supplies: 15A DC Power Supply with interface cable, 5, EA; LI 006, Portable control and data management laptop computers, 2, EA; LI 007, Black Body Source Model M315X12. SPECIFICATIONS: 1) Temperature Range: Ambient +5.00 C to 400.00 C; 2) Accuracy: (thermometric): +- 0.01% of the reading or 150mK whichever is Greater; 3) Temperature Resolution: 0.01C; 4) Stability: Short Term: +- 0.1C for 8 Hour Period; 5) Emitter Area: 12.0? x 12.0?; 6) Source Non-Uniformity: +- 0.2 C at 25C, +-1.0 C at 100C within center areaof 10.0? x 10.0?; 7) Emissivity (effective): Radiometric Calibration: +0.99; 8)Temperature Sensor: Precision Platinum RTD: 1/3 DIN; 9) Calibration Verification by Customer (Thermometric Method): A Hole with a Diameter of 0.165? (4.2mm) Provided on the Top of Emitter Plate; 10) Cooling Method: Air Cooled, Air Intake on Rear Panel; 11) Method of Control: Precision Digital Self-Tuning PID Controller; 12) Digital Communication Output: RS232C; 13) Method of Mounting of Controller: 19? Rack Mount, 7? High; 14) Operating Ambient Temperature: 15? to 30?C (for Rated Accuracy); 15) Power Requirements: 208VAC ? 10% 50/60Hz, 4,500 Watts Max. (230VAC Optional); 16) Interconnecting Cable: 3.6m (12?) Long; 17) Dimensions (Blackbody Source Only): 20?WX26?HX23?D., 1, EA; LI 008, Training and Installation, 1, LOT; For this solicitation, GSA FTS Region 2 intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. GSA FTS Region 2 is taking this action in a an effort to improve vendor access and awareness of requests while expediting its ability to gather multiple, completed, real-time offers. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their offer using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make an offer on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith offers, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, contact Jeff Benson at jeff.benson@gsa.gov or FedBid.com at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) directly to jeff.benson@gsa.gov (NOT THROUGH FEDBID.COM) so that they are received at that email address no later than the closing date and time for this solicitation. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. Delivery shall be made within 30 days or less after receipt of order (ARO) or per agreement with end user. CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. Use of FedBid.com - Buyers and Sellers agree to use FedBid.com as an independent Venue for buying and selling goods or services, respectively. It is understood that FedBid ranks all bids by price, regardless of the evaluation criteria used by the buyer. Buyers and Sellers understand that a Buyer always maintains all rights assigned under their contracting authority and/or applicable acquisition regulations, and may select the most advantageous bid for the governments purpose while considering offline factors such as delivery, past performance, socio-economic classifications, and source rotation. Vendors / sales agents submitting quotes MUST BE registered in ITSS. If vendor registration assistance is needed contact 877.243.2889 Option 2. Quote per specifications requested. If an item has been discontinued or is end of life, annotate quote referencing as such then quote an equal or better replacement for the item. Quote is to include all fees, including shipping or freight costs. No partial shipments unless otherwise specified and agreed to by end user. Provide on quote the estimated ETA, number of days, delivery can be expected after receipt of purchase order. All services and products provided in response to this requirement shall comply with Section 508 of the Rehabilitation Act of 1973 (29 U.S.C. 794d) and the Architectural and Transportation Barriers Compliance Board Electronics and Information Technical (EIT) Accessibility Standard (36 CFR part 1194). Quote must include statement addressing compliance or noncompliance with Section 508. New equipment ONLY, NO remanufactured products Bid MUST be good for 30 calendar days after submission Desired Delivery Date: 11/15/2005 Drawings are available. To request email jeff.benson@gsa.gov.
- Web Link
-
www.fedbid.com (a-19896, n-1281)
(http://www.fedbid.com)
- Place of Performance
- Address: Picatinny Arsenal, NJ 07806
- Zip Code: 07806-5000
- Country: US
- Zip Code: 07806-5000
- Record
- SN00870861-W 20050817/050815212539 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |