Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF AUGUST 17, 2005 FBO #1360
SOLICITATION NOTICE

Z -- Replacement of Air Handling Unit System Dampers at the SSA Bldg. in Queens, NY

Notice Date
8/15/2005
 
Notice Type
Solicitation Notice
 
NAICS
238220 — Plumbing, Heating, and Air-Conditioning Contractors
 
Contracting Office
Social Security Administration, Deputy Commissioner for Finance, Assessment and Management, SSA Region 2, 26 Federal Plaza, Room 4010, New York, NY, 10278
 
ZIP Code
10278
 
Solicitation Number
SSA-RFQ-02-05-1005
 
Point of Contact
Andrew Argiro, Contract Specialist, Phone 212-264-2766, Fax 212-264-2964, - Andrew Argiro, Contract Specialist, Phone 212-264-2766, Fax 212-264-2964,
 
E-Mail Address
andrew.argiro@ssa.gov, andrew.argiro@ssa.gov
 
Small Business Set-Aside
Total Small Business
 
Description
The Social Security Administration, Region II, seeks a contractor to provide all supervision, labor, material, equipment and other related services and supplies to remove existing Air Handling Unit system dampers and furnish and install new Air Handling Unit system dampers (fresh air supply, minimum, return and spill) as required in approximately 25 locations throughout the Joseph P. Addabbo building located in Jamaica, Queens, New York. (a) All new dampers furnished shall meet or exceed the standards set forth by SMACNA (Sheet Metal and Air Conditioning Contractors’ National Association), be manufactured of anodized aluminum, and be of the opposed blade design (rather than parallel). All linkages shall be manufactured with a non-corrosive material, concealed within the frame, constructed of 5/8” x 1/8” aluminum bar. Frame must be constructed of extruded aluminum, minimum thickness of .051”. Blades must be manufactured of extruded aluminum, minimum thickness of .050”. Blade seals on fresh air and minimum air dampers must be constructed with compression jamb seals of stainless steel. Control shaft must be factory installed, ˝” x 6” with outboard support bearings. Each section of the damper must be supplied with a bronze oilite bearing. The solicitation will be issued on approximately August 16, 2005 and may be downloaded from http://www.fedbizopps.gov . The date for a site visit will be contained in the solicitation. This is a 100 percent small business set aside, NAICS code 238220, $12.0 million. This procurement is being conducted under FAR Part 12 - Acquisition of Commercial Items. NOTE: THIS NOTICE WAS NOT POSTED TO WWW.FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (15-AUG-2005); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
 
Web Link
Link to FedBizOpps document.
(http://www.eps.gov/spg/SSA/DCFIAM/SSAR2/SSA-RFQ-02-05-1005/listing.html)
 
Place of Performance
Address: 155-10 Jamaica Avenue
Zip Code: 11432
Country: USA
 
Record
SN00871047-F 20050817/050815212926 (fbodaily.com)
 
Source
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.