SOLICITATION NOTICE
59 -- McNary Lock and Dam Spare Electrical Panel 01
- Notice Date
- 8/17/2005
- Notice Type
- Solicitation Notice
- NAICS
- 423690
— Other Electronic Parts and Equipment Merchant Wholesalers
- Contracting Office
- US Army Engineer District, Walla Walla, 201 N. Third Avenue, Walla Walla, WA 99362-1876
- ZIP Code
- 99362-1876
- Solicitation Number
- W912EF-05-Q-0148
- Response Due
- 8/29/2005
- Archive Date
- 10/28/2005
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. W912EF-05-Q-0148 is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 20 05-05, Effective 27 Jul 05 and Class Deviation 2005-o0001 and Defense Federal Acquisition in effect through DCN 20050726. This RFQ is 100% small business set-aside. The associated NAICS code is 423690 and the small business size standard is 500 employees . Quotes are to be provided for the following Line Items: Item 0001, 1 each, Auto Transfer Switch, 480VAC, 3phase, 3wire, continuous current rating 50 amp, NEMA-12 enclosure. Item 0002, 1 each, Electrical control panel for 2- 7.5 HP motors, associated e quipment and temperature / flow control valve. Wired per NEC and industrial codes. Drawings McNary Sketch 569 and MDP-9-6-9 provided upon request from Bruce Crittenden, phone 509-527-7215, e-mail Bruce.W.Crittenden@usace.army.mil. Panel Shall Include: A: 1 each, NEMA 12, 36 inch x 30 inch x 12inch wall mounted enclosure with cooling fan. Enclosure shall be clearly identified and designated as an Industrial Control Panel 508A by Underwriters Laboratories. B: 1 each Control Transformer, 500VA, 480V-120V, wi th Class J primary fuse. C: 2 each Motor starters with thermal overloads, 480VAC, NEMA Size 1, FVNR, 120 VAC continuous rated coil, with 1 NC auxiliary contact for external indicating light. Allen Bradley 509-BOD, Ser. B, With W53 overloads. Or engineer ap proved equal. D: 1 each Control Switch, 30mm rotary panel mounted with blank legend plate, 2 switch positions,2 contacts: 0 closed in right position, 2 closed in left position, 120VAC, 10A. E: 1 each, Selector Switch, 30mm rotary panel mounted with blank legend plate, 3 switch positions, 4 contacts: 2 closed in left position, 0 closed in center position, and 2 closed in right position,120VAC, 10Amps. F: 1 each, Selector Switch, 30mm rotary panel mounted with blank legend plate, 2 switch positions, 10 con tacts: 5 closed in left position and 5 closed in right position 120VAC, 10Amps. G: 4 each, Green lens indicating light, LED - 120 VAC, at least 22 mm diameter lenses. H: 11 each, Red lens indicating light, LED - 120 VAC, at least 22 mm diameter lenses. I: 7 each, Amber lens indicating light, LED - 120 VAC, at least 22 mm diameter lenses. J: 1 each, Loop Indicator, Red Lion CUB4LP/CLK or engineer approved equal. Salient features: Loop Powered Process Indicator, 39mm X 75 mm, 3.5 inch digits, LCD, Reflect ive red backlighting, 4-20 mA input, NEMA 4, Approved for use in Hazardous Locations. K: 9 each Relays: Allen Bradley 700-M 220 or engineer approved equal. Salient Features: Din rail mounted, 120 VAC 60 Hz coil relay with 2 normally open and 2 normally cl osed standard contacts, all contacts rated for 10 amps continuous, 10 amps make and brake at 120 VAC. Operating range 80% - 110% of rated voltage. Pick-up 85 1.1% nominal coil voltage. Drop-out 35-65% of niominal coil voltage.Rated for 50F to 140 F ambi ent operating temperature at rated operational current. Protection class IP2LX. Finger and back of hand proof according to VDE 0106, part 100. IEC Compact industrial relay with positively guided and mechanically linked contacts per IEC 60947-5-1. UL 508 co mplient. Operating time less than 40 ms pickup, connectors for #18 to #14 AWG stranded wire. Rated for 700,000 electrical operations, 10,000,000 mechanical operations. L: 5 each, Electronic Timer, IDEC Type RTE-P11. or engineer approved equal. M: 1 each, Single loop digital controller with adjustable setpoints, 1/4 DIN style, 120VAC power, RTD-compatible input for temperature sensing, 4-20 mA output for primary cooling control valve modulation, additional electro-mechanical 5A relay output for high temperature alarm and/or secondary cooling switching. Controller shall have a local user interface with LED configuration display and data entry pushbuttons, and an external interface compatible with RS485/ASCII/MODBUS with setpoint programming software designed for the controller. Controller shall be suitable for controlling an electrically actuated modulating control valve for a primary cooling pump motor and also acting as a temperature control switch to control operation of a secondary cooling pump motor. Item 0003, 2 each, 3 inch Ball Valve, Electric on/off, ANSI 150 # flange connections, manual operation possible (manual over-ride lever).Carbon Steel Body with SS Ball and Stem. Valve to be mounted with an electric actuator that meets the following specifications for quarter turn ON-OFF service. a. ENCLOSURE: CSA certified weatherproof NEMA 4 & 6 IP67b. POWER REQUIREMENT: 115VAC AC, 1 Phase. 60 Hertz (+ or -10% )c. M0TOR 1 phase squired cage induction type TENV, class F insulation, with automatic resetable thermal overload embedded in windings.(50% Duty Cycle 1200 starts/hour)d. TRAVEL LIMIT SWITCHES: 2 SPDT micro switches, Rated 15 A at 250 vac. Precision cams are individually adjustable to any position without special tools. Locking mechanism eliminates vibration problems. MANUAL OPERATION: Hand wheel provided for manual operation when. Power is not available. f. POSITION INDICATION: Local continuous mechanica l position indicator. g. GEAR HOUSING Grease lubricated for lifetime (100,000 operations)Worm/Quadrant type with rolled threaded worm and mechanical stops acting directly on the quadrant. Self Locking. h. TEMPERATURE: Standard Range, -40F to 158Fi. HEATER: Anti-condensation control with an 8 to l0 watt resistance heater in electrical housing. j. CONDUIT ENTRIES: Two ? inch NPT Plugged before shipment. k. Emerson Process Management, EL-O-Matic EL-55-LT, or engineer approved equal. Item 0004, 1 each, 3 inch flow control valve. ANSI 150 # flange connections, manual operation possible (manual over-ride lever).Carbon Steel Body with SS Ball and Stem. Valve to be mounted with an electric actuator. a. ENCLOSURE: CSA certified weatherproof NEMA 4 & 6 IP67b. POWER REQUIREMENT: 115VAC AC, 1 Phase. 60 Hertz (+ or -10%)c. M0TOR 1 phase squired cage induction type TENV, class F insulation, with automatic resetable thermal overload embedded in windings.(50% Duty Cycle 1200 starts/hour)d. TRAVEL LIMIT SWITCHES: 2 SPDT micro switches, Rated 15 A at 250 vac. Precision cams are individually adjustable to any position without special tools. Locking mechanism eliminates vibration problems. e. MANUAL OPERATION: Hand wheel provided for manual operation when Power is not avail able. f. POSITION INDICATION: Local continuous mechanical position indicator. g. GEAR HOUSING Grease lubricated for lifetime (100,000 operations)Worm/Quadrant type with rolled threaded worm and mechanical stops acting directly on the quadrant. Self Locking . h. TEMPERATURE: Standard Range, -40F to 158Fi. HEATER: Anti-condensation control with an 8 to l0 watt resistance heater in electrical housing. j. CONDUIT ENTRIES: Two ? inch NPT Plugged before shipment. K. Emerson Process Management, EL-O-Matic EL-55-L T, or engineer approved equal. Item 0005, 2 each, RTD with dry well, Resistance Temperature Detector (RTD), 100 ohm platinum, 6 inch sheath, -40 to 130 deg C,1% error, 3-wire, with thermowell and aluminum terminal head, ? inch NPT threads. Item 0006, 1 e ach, Combination differential Switch and Gage 0-40 psi Gauge and Switch, min. 4 inch face diameter, 1/8 inch or1/4 inch female NPT, 20 to 120 deg F, two DPDT relays, 120 VAC input with 2 A switching capability, max. +/- 3% error of full scale reading. For oil use, Dwyer 43240S or engineer approved equal. Item 0007, 2 each, Combination differential Switch and Gage 0-20 psi Gauge and Switch, min. 4 inch face diame ter, 1/8 inch or1/4 inch female NPT, 20 to 120 deg F, two DPDT relays, 120 VAC input with 2 A switching capability, max. +/- 3% error of full scale reading. For oil use, Dwyer 43220 or engineer approved equal. Item 0008, 4 each, Combination differential S witch and Gage 0-20 psi Gauge and Switch, min. 4 inch face diameter, 1/8 inch or1/4 inch female NPT, 20 to 120 deg F, two DPDT relays, 120 VAC input with 2 Amp switching capability, max. +/- 3% error of full scale reading. For water use, Dwyer 43220B or en gineer approved equal. Item 0009, 1 each, Combination differential Switch and Gage 0-10 psi Combination Differential Pressure Gauge and Switch, min. 4 inch face diameter, 1/8 inch or1/4 inch female NPT, 20 to 120 deg F, two DPDT relays, 120 VAC input with 2 A switching capability, max. +/- 3% error of full scale reading. For oil use, Dwyer 43220 or engineer approved equal. Item 0010, 2 each, Combination differential Switch and Gage 0-10 psi Gauge and Switch, min. 4 inch face diameter, 1/8 inch or1/4 inch female NPT, 20 to 120 deg F, two DPDT relays, 120 VAC input with 2 A switching capability, max. +/- 3% error of full scale reading. For Water Use, Dwyer 43210B or engineer approved equal. Item 0011, 1 each, Flow Switch, Solid state thermal flow switch. 12 0 VAC relay with 3 amp contact, programmable setpoints, ? inch NPT connection, 4- meter cable with compatible connector. The flow switch shall be capable of operating in a flow of 130-260 gpm of ISO 68 oil in a 3 inch pipe. IFM efector SI1006 or engineer a pproved equal. Item 0012, 1200 foot, Wire 1/0 THHN black stranded copper. Item 0013, 2000 foot, Wire #8 THHN black stranded copper. Item 0014, 1500 foot, Wire #10 THHN black stranded copper. Item 0015, 200 foot, conduit 1.25 inch galvanized steel. Ite m 0016, 10 each, Conduit Hub 1.25 inch zinc. Item 0017, 20 each, Conduit Locknut 1.25 inch. Item 0018, 10 each, Conduit Ground bushing 1.25 inch. Item 0019, 10 each, Conduit LB 1.25 inch. Item 0020, 10 each, Conduit LB cover 1.25 inch. Item 0021, 3 ea ch, Conduit LB gasket 1.25 inch. Item 0022, 10 each, Electrical Ground Clamp for 3 inch copper pipe. Item 0023, 2 each, Electrical Ground Clamp for 4 inch copper pipe. Item 0024, 1 each, Electrical connector for flow switch (item 11). Item 0025, 1 each , Welding Adapter M18X1.5 for flow switch (item 11). All line items to be deliver within 30 days after award to McNary Project, 82790 Devore Road, Umatilla, OR 97882-1230, FOB Destination. FAR 52.212-1, Instructions to Offerors -- Commercial, applies to this acquisition. Offerors are advised to include a completed copy of the provision at FAR 52.212-3, Offeror Representations and Certifications -- Commercial Items, with its offer. The clause FAR 52.212-4, Contract Terms and Conditions -- Commercial Item s, applies to this acquisition. The clause FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition and the following additional FAR clauses cited in the clause are app licable to the acquisition: 52.219-6, Notice of Total Small Business Set-Aside, 52.222-3, Convict Labor, 52.222-19, Child Labor, 52.222-21, Prohibition of Segregated Facilities, 52.222-26, Equal Opportunity, 52.222-35, Equal Opportunity for Special Disable d Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans, 52.222-36, Affirmative Action for Workers with Disabilities, 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans, 52.225- 3 Alt I, Buy American Act - Free Trade Agreement - Israeli Trade Act, 52.225-13, Restrictions on Certain Foreign Purchases, 52.232-33, Payment by Electronic Funds Transfer--Central Contractor Registration, 52.232-34, Payment by Electronic Funds Transfer--O ther Than Central Contractor Registration. The clause DFAR 252.212-7001, Contract Terms and Conditions Required to Implement Statutes Or Executive Orders Appli cable to Defense Acquisitions of Commercial Items, applies to this acquisition and the following additional DFAR clauses cited in the clause are applicable to the acquisition: 252.247-7023, Transportation of Supplies by Sea, 252.247-7024, Notification of Transportation of Supplies by Sea. Quotes are due by close of business 29 Aug 2005. Quotes may be mailed to Walla Walla District COE, Contracting Division, Attn: Bruce Crittenden, 201 N. Third Ave, Walla Walla, WA 99362-1876. Quotes may be faxed to Bruc e Crittenden at 509-527-7802. Quotes may be e-mailed to Bruce.W.Crittenden@.usace.army.mil. Point of Contact for this acquisition is Bruce Crittenden, 509-527-7215.
- Place of Performance
- Address: McNary Lock and Dam 82790 Devore Road Umatilla OR
- Zip Code: 97882-1230
- Country: US
- Zip Code: 97882-1230
- Record
- SN00872945-W 20050819/050817212649 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |