SOLICITATION NOTICE
35 -- TABLE MOUNTED MATERIALS TESTING SYSTEM
- Notice Date
- 8/22/2005
- Notice Type
- Solicitation Notice
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of the Navy, Commander in Chief, Atlantic Fleet, CNRNE Storefront Newport, 47 Chandler St. Procurement, Newport, RI, 02841-1716
- ZIP Code
- 02841-1716
- Solicitation Number
- N32411-05-T-0243
- Response Due
- 8/26/2005
- Archive Date
- 8/30/2005
- Description
- 0001 1 Each Model 5565 Table Mounted Materials Testing System, Capacity5 kN (500 kg, 1125 lb) load frame.Standard features include:- Digital crosshead drive system with fully variable speed control.- Integrated digital closed-loop control and data acquisition electronics.- Crosshead extension and load measurement channels (up to two additional channels can be added).- Automatic recognition and calibration of transducers.- Test control panel with start, stop and return functions, programmable function keys, test status indicators, variable speed jog and specimen protection.- On-line, context sensitive help and reference system with hypergraphics.- System of units: SI, metric, US customary (user-selectable).- Testing speed range: 0.001 to 1000 mm/min (0.00004 in/min to 40 in/min).- Crosshead return speed: 1200 mm/min (47.2 in/min) with built-in deceleration for precise crosshead positioning.- Data collection: 40 kHz sampling rate with 500 Hz synchronous data logging on up to four channels.- Data display: up to four channels real-time data simultaneously at 4 1/2 digit resolution.- Precision, pre-loaded ballscrew drive and crosshead guidance with reverse stress testing.- Computer interface card and cable with installation of the interface card and systemsoftware (when the system computer has been supplied by Instron).- Base adapter: Type D female fitting (1.25 in. connection with 0.5 in clevis pin).- CE mark conformity.a. 5565-E1 Model 5565 Maximum Crosshead Travel 1135 mm (44.7 in). 0002 1 Each 2525-805 Tension/Compression Load Cell, Static Load Capacity: 5 kN (500 kg, 1000 lb)- Type O female fitting (12 mm connection with 6 mm diameter clevis pin).- Drop through, bolt on design with self identification and electrical calibration.- Linearity: +/- 0.25% of reading over a range of 0.4% to 100% of capacity.- Repeatability: +/- 0.25% of reading over a range of 0.4% to 100% of capacity.- Hysteresis: 0.2% of maximum reading in cycle.- Creep: 0.2% of reading over 3 minutes.- Output Sensitivity: 2.0 millivolts per volt +/- 20% at full rated capacity.- Bridge Resistance: 350 ohms +/- 5%.- Overload Protection: 150% of capacity without permanent zero shift. 300% of capacity or 5 kN (500 kg, 1000 lb) whichever is greater without mechanical failure.- Zero Stability: 0.001% of full rated output per hour (isothermal conditions).- Temperature Compensation: 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit).- Temperature Effect on Zero and Span: 0.002% of capacity per degree Celsius. 0003 1 Each 2525-808 Tension/Compression Load Cell, Static Load Capacity: 10 N (1 kg, 2 lb)- Type OO female fitting (6 mm connection with 2.5 mm diameter clevis pin)- Drop through, bolt on design with self identification and electrical calibration.- Linearity: +/- 0.25% of reading over a range of 0.4% to 100% of capacity.- Repeatability: +/- 0.25% of reading over a range of 0.4% to 100% of capacity.- Hysteresis: 0.2% of maximum reading in cycle.- Creep: 0.2% of reading over 3 minutes.- Output Sensitivity: 2.0 millivolts per volt +/- 20% at full rated capacity.- Bridge Resistance: 350 ohms +/- 5%.- Overload Protection: 150% of capacity without permanent zero shift. 300% of capacity or 5 kN (500 kg, 1000 lb) whichever is greater without mechanical failure.- Zero Stability: 0.001% of full rated output per hour (isothermal conditions).- Temperature Compensation: 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit).- Temperature Effect on Zero and Span: 0.002% of capacity per degree Celsius. 0004 1 Each 2410-400 Bluehill 2 Materials Testing Software for new 3300, 5500, 5800 and 8800 systems and EXTEND Retrofits. For Windows? 2000 and Windows? XP operating systems. The basic software provides the following functionality and features:- Set-up and configuration of the display screen and control panel- Set-up of limits and gain controls - Security with user passwords- Automatic calibration and balancing of transducers- User calculation creator for defining custom calculations- Prompted Test Sequence Creator- Live runtime test plots with automatic scaling and zoom-in/out- Report generation with basic report templates included- Monitoring of system and system service histories- On-line help and reference guide- API (Advanced Programming Interface) for data access or automation- Specimen Protect (5500 and 5800 systems only)- Automatic grip control (frame dependent)- Saving and retrieval of test methods and data- Example test methods included for easy test creation- Interactive User Learning CD- One year of priority toll free telephone supportplus 2410-400Z1 Complete Bluehill 2 Software Suite. Includes Bluehill Softwarewith:- Tension, Compression, Flexure, Peel/Tear/Friction,and Metals Applications Packages- Enhanced Control- Test Profiler- Reports and Graphs Pack. 0005 1 Each 1430-091 Factory integration of a customer-supplied computer that meets Instron compatibility requirements for brand and performance. 0006 1 Each 2501-094 Tension Coupling Type Om (12 mm connection with 6 mm clevis pin) to Cf (5/8 in connection with 1/4 in clevis pin) adaptor for existing grips.Capacity: 10 kN. 0007 1 Each 2810-195 Ball Burst Compression Fixture. Capacity: 10 kN (2000 lb, 1000 kg). Upper fitting: Type Om (12 mm connection with 6 mm clevis pin). Lower: Type Dm (1.25 in connection with 1/2 in clevis pin). Conforms to ASTM D3787 and Federal Standard 191A. 0008 1 Each 5565-K1 Series 5500 System Installation Verification and Set-up. This service includes :- Integration and set-up of load frame and computer- Mounting and testing of all peripheral fixtures and transducers- Set-up of hardware to the users immediate requirement- Development of one test method to the user?s requirement including testing of several samples, review of test results and review of report format- Basic operator familiarization for up to 2 operators including the use of all safety features, calibration requirements and basic operational functions.a 2410-400K2 Bluehill Application Development b 1480-001 Verification of the Load Weighing System at installation to Instron Specifications, which exceed ASTM Specifications for one Load Cell up to 60 kip.Verification at installation is required by ASTM E4 Standard. An Instron Service Engineer will perform verification and provide a report with data including percent error and repeatability for each load value reported. Instron calibration standards are designed and calibrated at Instron Force Calibration Laboratory (NVLAP Accredited) and a measurement uncertainty of less than 1/3 of the specification of the testing machine (ISO 10012-1 and ANSI Z540-1 requirements). - Development of up to 5 Bluehill software test methods to the user?s requirement including testing of several samples for each method, review of test results andreview of report format.- Basic training for up to 3 operators including the use of safety features, calibration requirements and basic operational functions. 0009 1 Each 1480-001A1 Verification of an additional transducer up to 60 kip. 0010 1 Each 1451-302B1 Bluehill Operators Course A 2-day training course on the use of the Bluehill OperatingSystem software that can be installed on 3300, 42/43/4400, 5500, 5800, and 8800 Testing Instruments. Students work on their own computers learning how to program their test setups, how to run tests on the system and how to create their own test methods.They learn how to save, recall and generate test data, test methods and test reports. 0011 1 Each 2712-017 Pneumatic Side Action Grips Capacity: 5 kN (1,000 lb, 500 kg).Temperature range: 0 ?C to 100 ?C (32 ?F to 212 ?F).Upper and lower fittings: Type Dm (1.25 in connection with 1/2in clevis pin).Maximum specimen thickness is face dependent.Requires faces and an Automatic Air Control Kit or Footswitch. 0012 1 Each 2501-091 Tension Coupling Type Om (12 mm connection with 6 mmclevis pin) to Df (1.25 in connection with 1/2 in clevis pin).Capacity: 10 kN. 0013 1 Each 2702-111 Faces, SerratedFFP25 mm x 50 mm (1 x 2 in). Specimen thickness:0 - 20 mm. For 2712-017 Pneumatic Side Action Grips and 2712-012 Pneumatic Side Action Grips. Set of four faces. 0014 1 Each 2702-112 Faces, Waved Profile 50 mm x 50 mm (2 x 2in). Specimen thickness: 0 - 15 mm. For 2712-017 Pneumatic Side Action Gripsand 2712-012 Pneumatic Side Action Grips. Set of four faces. 0015 1 Each 2702-113 Faces, Waved Profile 75 mm x 50 mm (3 x 2 in). Specimen thickness: 0 - 15 mm. For 2712-017 Pneumatic Side Action Grips and 2712-012 Pneumatic Side Action Grips. Set of four faces. 0016 1 Each 2702-100 Faces, Smooth Ground. 75 mm x 50 mm (3 x 2 in). Specimen thickness: 0 - 15 mm. For 2712-017 Pneumatic Side Action Grips and 2712-012 Pneumatic Side Action Grips. Set of four faces. 0017 1 Each 2702-102 Faces, Serrated. 75 mm x 50 mm (3 x 2 in). Specimen thickness:0 - 15 mm. For 2712-017 Pneumatic Side Action Grips and 2712-012 Pneumatic Side Action Grips. Set of four faces. 0018 1 Each 2702-106 Faces, Smooth Ground 25 mm x 25 mm (1 x 1 in). Specimenthickness: 0 - 20 mm. For 2712-017 Pneumatic Side Action Grips and 2712-012 Pneumatic Side Action Grips. Set of four faces. 0019 1 Each 2702-109 Faces, Smooth Ground.FFP25 mm x 50 mm (1 x 2 in). Specimenthickness: 0 - 20 mm. For 2712-017 Pneumatic Side Action Grips and 2712-012 Pneumatic Side Action Grips. Set of four faces. 0020 1 Each 2712-019 Pneumatic Side Action Grips. Capacity: 250 N (50 lb, 25 kg). for low force cellTemperature range: -29 ?C to 80 ?C (-20 ?F to 176 ?F).Maximum specimen thickness: *3.175 mm (0.125 in)*Reduced by 0.9 mm (0.036 in) with rubber coated faces.Upper and lower fittings: Type Om (12 mm connection with 6mm clevis pin).Equipped with manual air switch and check nuts.Requires faces and an Air Distribution Kit.An Automatic Air Control Kit or Footswitch is recommended. 0021 1 Each 2702-005 Faces, Rubber Coated 25 mm wide x 25 mm high (1 x 1 in.). Setof 4 faces. For 2712-002, 2712-014 and 2732-001 Pneumatic Side Action Grips, and 2710-001 Screw Action Grips. 0022 1 Each 2702-004 Faces, Smooth Ground. 25 mm wide x 25 mm high (1 x 1 in.).Set of 4 faces. For 2712-002, 2712-014 and 2732-001 Pneumatic Side Action Grips, and 2710-001 Screw Action Grips. 0023 1 Rack 2701-004 Pneumatic Footswitch Not suitable for pretension grip control 0024 1 2910-051 Support Table Provides convenient working height and leg roomfor system operation while seated. Capacity 450 kg (1000 lb). Table top dimension: 762 mm x 1524 mm (30 in x 60 in) Height adjustable from 635 mm to 813 mm (25 in to 32 in). for use with:For standard width, standard height and single test spaceelectro-mechanical systems including:Models 5864, 5865, 5866, 5867, 5564, 5565, 5566, 5567, 4411,4464, 4465, 4466, 4467, 3365, 3366, 3367, 3369 and all 3300,4400, 5500 and 5800 single column systems. 0025 1 Each 2501-350 Rigid Coupling Type OO (6mm connection with 2.6 clevis pin) to Of (12mm connection with 6mm clevis pin). 0026 1 JOB Shipping to NCTRF, Natick, MA 0027 1 Each Trade-in allowance of Existing System. Brand name sole source.
- Place of Performance
- Address: NAVY CLOTHING AND TEXTILE RESEARCH FACILITY, BLDG #86, KANSAS STREET, NATICK MA
- Zip Code: 01760
- Country: USA
- Zip Code: 01760
- Record
- SN00876272-W 20050824/050822212441 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |