SOLICITATION NOTICE
69 -- DIESEL ENGINE TRAINING AID - 1 SYSTEM
- Notice Date
- 8/23/2005
- Notice Type
- Solicitation Notice
- NAICS
- 423490
— Other Professional Equipment and Supplies Merchant Wholesalers
- Contracting Office
- USPFO for Minnesota, Camp Ripley, 15000 Highway 115, Little Falls, MN 56345-4173
- ZIP Code
- 56345-4173
- Solicitation Number
- W912LM-05-T-0073
- Response Due
- 8/31/2005
- Archive Date
- 10/30/2005
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will be issued as W912LM-05-T-0073, available upon request. W912LM-05-T-0073 is being issued as a Request for Quotation, which incorporates provisions and clauses for commercial items in effect through Federal Ac quisition Circular 2005-03. This acquisition is set-aside for small business. The applicable NAICS code is 423490. The following supplies are required: CLIN 0001 DIESEL ENGINE PROGRAM WITH CLOSED LOOP DYNO. (RECYCLED DETROIT DIESEL 60 SERIES ENGINE w / DDECIV), MFG: Megatch Corporation, MODEL: MEG330DD60 QTY: 1 Each. Specifications as follows: PROGRAM: To be a late model operational diesel engine on a special stand, with all the necessary components assembled and ready for operation with a dual hydraulic, closed loop dynamometer. The program to consist of: An Operational Diesel Engine with fault insertion, Engine Test Stand, Full Instrument Panel, Instructional Reference Manual, and Diesel Engine Hydraulic Dynamometer with Dual System. The ME G330 Diesel Engine Program introduces the latest in domestic, truck diesel engines available with Fault Insertion Module. The trainer to have the following cooling, electric and exhaust systems: COOLING SYSTEM: The cooling system is to consist of a heav y duty radiator, fan guard and all the necessary hoses and clamps. Coolant fluid is to be pre-filled ready for operation. ELECTRICAL SYSTEM: The electrical system to include a heavy duty starter , heavy duty capacity alternator, and heavy duty batteries . Battery and fuel tank to be mounted on a separate steel table free from engine vibrations. The table is to be constructed from steel channels 1-1/4 x 1-1/4 and covered with 16 gauge steel plates. The table dimensions to be 7-3/4 H x 34 L x 24 W with a n approximate weight of 20 LBS. INTAKE AND EXHAUST SYSTEM: The system is to include a protective shield around the flywheel. The exhaust system is mounted along side the engire and bent around for safely exhausting the fumes. The intake air filter is m ounted vertically along the radiator and the engine is supercharged for high performance. ENGINE TEST STAND: The engine mount to be a heavy duty test stand, constructed from 2 x 2 steel mechanical tubing frame, 11 gauge heavy wall type, welded at all j oints and having special pair of universal engine mounts pre-drilled to accept several different types of engines. The stand is to accommodate a heavy-duty radiator mount positioned in the front of the engine test stand. The engine test stand to be posit ioned on specially designed vibration dampers and are to be welded to the main frame. A total of four sets of vibration dampers are to be installed. Each set of dampers to have four Toro type pads, held centrally by a ? bolt and steel plates. The steel mount is to be painted black. On each of the four corners of the engine mount, wheels are to be provided for easily rolling the engine to any location. These wheels are to be removable and the storage space is to be provided on the mount for them. Over all dimensions are to be 72 L x 24 H x 36 W and weight to be approximately 150 LBS. FULL INSTRUMENT PANEL: The instrument panel is constructed from 16 gauge steel, 24 W x 26 L and is fully wired to the engine control system. A bank of toggle switches t o be mounted in a lockable protective enclosure whereby the instructor to be able to fault circuits such as Engine Speed Sensor, CTS, TPS, MPA and Voltage references. These switches to produce both code and non-coded faults on computer controlled engi nes. INSTRUMENT PANEL TO INCLUDE: 2-1/8 Charge Meter, 3-1/2 Clock-Hour Meter, Throttle Assembly, 3-1/2 Tachometer, On-Off Start Ignition Switch, 2 Water T emperature Gauge 100-280 F, 2 Oil Pressure Gauge 0-100 PSI, 2 Oil Temperature, Gauge 60-260 F. INSTRUCTIONAL REFERENCE MANUAL: The manuals provide full information and procedures for troubleshooting diesel engines. Potential problems are listed, diag nostic methods are indicated and repair procedures detailed. Also to be included is the manufacturers service manual, to contain detailed procedures, descriptions and diagrams of the engine provided: Students Manual, Instructors Guide and Service Manu al. HYDRAULIC DYNAMOMETER: The hydraulic dynamometer is a compact, quiet and versatile unit for engine testing. The dyno is rated for the Engines HP peak end. The hydraulic dynamometer and engine are directly coupled together by means of rigidly mounti ng them to the engine stand with an adjustable mount. The dynamometer is designed to adapt to most automotive engines. An optional mounting is available in which the dyno is mounted directly to the engine. CLOSED LOOP DYNO COOLING: In case water is not readily available in the shop, a close-looped system is incorporated for dyno cooling. The system uses a heavy-duty radiator specially designed for hydraulic cooling. An electrical fan is attached to the radiator to provide forced air-cooling. The radi ator is mounted to the engine frame and controlled through a switch on the instrument panel. A safety system interlock prevents running of the engine without having the cooling system fan operating. GENERAL REFERENCE MANUALS: These manuals offer specifi cation for greater depth in diesel performance and are included for the study of diesel mechanics. SPECIFICATIONS: Size: 8 10 L x 3 W x 5 H Weight: Approximately 3,000 LBS. CLIN 0002 Shipping Costs associated with Clin 0001 Qty: 1 Lot. CLIN 0003 SPECIALIZED ELECTRONICS TRAINER, MFG: Megatech, MODEL: MEGSET-APG2 Qty: 1 Each. SPECIFICATIONS: Size: 16 x 22 (including stand) 4-3/4 high in front, 7 high in back Material: 3/16 Acrylic plastic Mounted in slanted wood stand for desk or tabletop use. Hinged top allows storage of modules and leads. Plastic has 64 milled holes for inserting individual modules during training, as well as 8 red and 8 black jacks for test leads. Fuse: 5 amps 3AG. Power Supply: 12/24 Volt 3 Amp Fixed Re gulated Supply. Modules Included: All mounted on white acrylic plastic, with silk screened labeling; Banana plugs on back for inserting and removing from test board; Lamp 12V, 2W (Quantity: 2); Lamp 12V, 1W (Quantity: 2); Resistor 100 ohm, 2 W; Resistor 200 ohm, 1 W; Resistor 300 ohm, 1 W; Resistor 100K ohm, ? W; Resistor 300K ohm, ? W; Ohm Potenitometer 100K Vari; Switch SPST, On-Off; Switch DPDT, On-Off-On; Relay, NO or Nc; 24 Volt Relay Module (Quantity: 5); Starter Solenoid Module; Condenser 2200 mfd, 470 mfd; LED 12V, ? W, with resistor; Diode 12V; Zener Diode, 12V; NPN Transistor with Resistor; PNP Transistor with Resistor; Motor; and Buzzer. Test Leads: Stackable Banana Leads, 8 Pair Red & Black, 12 . Connectors: Set 1 for Open Circuit, 1 for C losed Circuit. Curriculum: 83 Page Notebook included with explanations, examples, and questions. CLIN 0004 Shipping Costs associated with Clin 0003 Qty: 1 Lot. CLIN 0005 6 CYLINDER INTERCOOLER TURBO DIESEL ENGINE CUTAWAY MFG: Megatech Corporati on, MODEL: MEGART608 Qty: 1 Each. SPECIFICATIONS: To be a cutaway unit which shows every component of a 6 Cylinder Intercooler Turbo Diesel Engine. This cutaway is painted with different colors and shades to better distinguish its different parts, se ction cuts, fuel, lubrication and cooling systems, etc. Many parts have been chromium plated or galvanized for a longer life. This unit is operated at slow speed by a 220V gear motor to better understand and observe the operation of its mechanical parts. TECHNICAL FEATURES: 4 stroke engine 6 cylinder in-line, Displacement: 5200 cu. Cm, Direct injection, Bosch type in-line injection pump with mechanical gov ernor, Intercooler air-air, Geared distribution, Camshaft in crankcase, Spring single-plate clutch, Fuel fed by turbo supercharger and intercooler, Gearbox: 4 forward speeds + reverse. SPECIFICATIONS: Dimensions: 32 x 63 x 67 H. Approximate Weight: 1080 LBS. CLIN 0006 Shipping Costs associated with Clin 0005 Qty: 1 Lot. Payment will be made through Electronic Transfer of Funds. Successful vendor must be registered with CCR (www.ccr.gov). The following provisions and clauses apply to this solicitation: FAR 52.212-1, Instructions to Offers, Commercial Items; FAR 52.212-3, Offerors Representations and Certifications Commercial Items; FAR 52.212-4, Contract Terms and Conditions, Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items (including 52.219-8, 52.219-23, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-41, 52.222-42, 52.222-43, 52.232-23); DFAR 252.212-7000, Offeror Representations and Certifi cations Commercial Items; DFAR 252.212-7001, Contract Terms and Condition Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items (including 252.225-7001, 252.243-7002). The Government will evaluate quot es in response to this request and award a purchase order/contract to the responsible offer or whose offer conforming to this request, will be most advantageous to the Government considering price and ability to perform in a timely manner. Award will be b ased on the best value to the Government in accordance with procedures in FAR 13.106-2(b). Offers should be submitted to U.S. Property & Fiscal Office Minnesota, Procurement Division, Colleen Moore, 15000 Highway 115, Camp Ripley, Little Falls, MN 5634 5-4173 or send to Colleen.Moore@mn.ngb.army.mil via email. Quotes must be received no later than 31 August 2005 by 4:30 CDST. Fax transmission of quotes will be accepted at 320.632.7799. All responsible sources may submit a quote which shall be consider ed.
- Place of Performance
- Address: USPFO for Minnesota Camp Ripley, 15000 Highway 115 Little Falls MN
- Zip Code: 56345-4173
- Country: US
- Zip Code: 56345-4173
- Record
- SN00877143-W 20050825/050823212501 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |