SOLICITATION NOTICE
16 -- Aircraft Wheel Build-Up Stand, Wheel Torquing System
- Notice Date
- 9/9/2005
- Notice Type
- Solicitation Notice
- NAICS
- 334513
— Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
- Contracting Office
- Department of the Air Force, Air Force Reserve Command, 452 Operational Contracting Office, 1940 Graeber Street Bldg 449, March ARB, CA, 92518-1650
- ZIP Code
- 92518-1650
- Solicitation Number
- F5F2MA5192A1
- Response Due
- 9/16/2005
- Archive Date
- 10/1/2005
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information include in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. F5F2MA5192A1 is issued as a request for quotation. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-05. The solicitation listed here is 100% small business set-a-aside. The Federal Supply Class (FSC) is 1730. The associated Standard Industrial Classification (SIC) is 3823. The North American Industry Classification System is 334513 and the associated business size standard is 500 employees. This request for quotation consists of the following: Item 0001, Quantity 1: Universal Wheel Build-Up Stand. Description: Shall be designed for efficient one-person operation with or without the aid of an overhead hoist. Shall provide for the elimination of operator heavy lifting and provide a stable horizontal position for wheel bolt torquing. Shall accommodate any aircraft main or nose wheel with the use of quick-change wheel adapters for each different wheel with floating sockets that are configured to match the bolt pattern and size for the particular wheel. Wheel handling capacity shall be up to 60 in diameter and up to 800 lbs. Operation shall be by pushbuttons mounted remote pendant that allows operator to take desired position around equipment while controlling wheel clamp, lifting and tilting operations. Wheel clamping shall draw the inboard and outboard wheel halves into the tire using a hydraulic cylinder positioned vertically in the center of the unit. Shall contain pressure-limited hydraulics, preset safety reliefs, built-in flow controls and bearing adapter fitted to the inboard wheel bearing cup in order to protect the wheel assembly, bearing hubs and bearing race surfaces from damage during the assembly process. Shall include a lift cylinder or equivalent to adjust the height of the wheel adapter so that when it is oriented horizontally its center exactly matches the centerline of the wheel being assembled or disassembled. Shall include a tilt cylinder or equivalent used to traverse from vertical to horizontal the orientation of the wheel adapter. Item 0002, Quantity 1: Wheel Assembly Torquining System. Description: Shall perform bolt tightening with an accuracy of 1% full-scale according to both torque and snug angle procedures. Torque and torque angle values shall be clearly indicated as pass/fail (green/red). Shall accommodate aircraft wheels with even or odd number of bolt diameters from 8 in to 25 in and torque values up to 332 ft-lbs. Shall be capable of providing torque capacity for no less than 100 aircraft wheel configurations, to include pre-torque, final torque and torque angle values for each wheel. System shall be capable of being calibrated by hardware or software. Operator?s interface to be located directly above the nut runners. Entire assembly shall be suspended from an air balanced cable on a post-mounted overhead swing boom. Nut runners shall be programmable for torque control, angle control or a combination of both. Shall have touch screen monitor and an integral PC. Complete assembly shall consist of torquing system with dual nut runners suspended on air balanced cable from a swinging gantry boom, a wheel-lifting fixture, a torquing spindle angle-check calibration adapter and torque calibration standard with NIST traceable calibration. Include FOB Destination charges to March ARB, CA 92518. Include a copy of specifications with offer. The following provisions and or clauses apply to this acquisition. FAR 52.212-1, Instructions to Offerors?Commercial Items, 52.212-3, Offeror Representations and Certifications-Commercial Items, FAR 52.212-4, Contract Terms and Conditions-Commercial Items, and FAR 52.212-5, Contract Terms and Condition Required to Implement Statues or Executive Orders-Commercial Items. Also DFARS Clause 252.232-7003 ? Electronic Submission of Payment Request. Clauses may be accessed electronically in full text though http://farsite.hill.af.mil. Vendors must be actively registered with (1) the Central Contractor Registration (CCR). The CCR website is http://www.ccr.gov. (2) Wide Area Work Flow (WAWF). The WAWF website is https://wawf.eb.mil/. Contractors not registered with these programs may have their proposals rejected as non-responsive. Contractors are required to submit their TAX ID number, CAGE Code, and DUN and BRADSTREET number with their proposal. Quotes may be transmitted by e-mail to david.hill@march.af.mil or FAX to (951) 655-5753.
- Place of Performance
- Address: March ARB
- Zip Code: 92518
- Country: USA
- Zip Code: 92518
- Record
- SN00891436-W 20050911/050909212308 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |