MODIFICATION
72 -- Motorized Window Shades and Installation
- Notice Date
- 9/12/2005
- Notice Type
- Modification
- NAICS
- 423220
— Home Furnishing Merchant Wholesalers
- Contracting Office
- Department of the Air Force, Direct Reporting Units, USAF Academy - 10 MSG/LGC, 8110 Industrial Drive Suite 200, USAF Academy, CO, 80840-2315
- ZIP Code
- 80840-2315
- Solicitation Number
- F4BQ025189A300
- Response Due
- 9/19/2005
- Archive Date
- 10/1/2005
- Point of Contact
- Patricia Conken, Contract Specialist, Phone 719-333-4703, Fax 719-333-6608,
- E-Mail Address
-
patricia.conken@usafa.af.mil
- Small Business Set-Aside
- Total Small Business
- Description
- Amendment 2 Purpose of this amendment is to provide an updated Statement of Work (SOW)of the government's requirement and provide pictures which provide greater detail into the dimensions of the area that needs to be covered. Previous SOW and pictures should be disregarded. Any interested party should bid on the SOW and pictures provided within this amendment. Quotations must be received by the government no later than 10:00 a.m. MDT, 19 September 2005. Pictures can be obtained by emailing Patricia Conken at patricia.conken@usafa.af.mil or Kylie Hager at kylie.hager@usafa.af.mil. The following is the current SOW:1. General. The contractor shall provide, deliver, and install motorized window shades at Arnold Hall, Building 2302 on the windows overlooking the exterior theatre balcony area. Window area to be covered by the motorized window shades is approximately 325 inches high and approximately 1,284 inches wide. This window area is divided into five (5) major sections. 1.1. Motorized window shades shall meet the following criteria: - Color of window shades shall be “Pewter”. - Window shades shall be washable, flame retardant, and fade resistant. - Window shades shall have a reversible texture weave with alternating predominant color in the warp and fill (front and back) and shall be of a satin & diamond weave. - Window shades shall have an openness construction of 1-2%. - UV deterioration shall be zero. 1.2. Installation Requirements. 1.2.1. Installation to address height dimensions. The motorized shades shall be installed in two (2) sections to cover the height dimensions. The top section shall cover a height of approximately 169 inches while the bottom section shall cover a height of approximately 156 inches. 1.2.2. Installation to address width dimensions. The motorized shades shall be installed in five (5) sections at the top and five (5) sections at the bottom. The five (5) sections shall consist of two (2) sections approximately fourteen and one-half (14 1/2) feet wide and three (3) sections approximately twenty six (26) feet wide. 1.2.3. Installation shall include a motor control system with two (2) wall mounted switches and capable of two (2) operation modes; one mode to operate the top shades together at one time and the lower shades together at one time and a second mode to operate each top section of shades independently and each bottom section independently. The switches shall be installed on the second pillar from the southwest end of the window, at about eight (8) feet high. 1.2.4. Motors. The installation shall include ten (10) motors, five (5) for each of the top five (5) sections of shades and five (5) for each of the lower sections of shades. 1.2.5. Installation shall include tracks at each side of each section of shades. 2. The contractor shall inspect the window shades for any damages prior to installation. The contractor shall perform any electrical and mounting work necessary for the installation of the motorized window shades. The contractor shall barricade the work area during installation of window shades to prohibit entry of unauthorized personnel and shall clean the area daily. 3. Contractor shall comply with all AFOSH, OSHA, Federal, state and local safety laws and regulations. Delivery and installation must be within 45 days after receipt of award. NOTE: THIS NOTICE WAS NOT POSTED TO WWW.FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (12-SEP-2005); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/USAF/DRU/10ABWLGC/F4BQ025189A300/listing.html)
- Place of Performance
- Address: Arnold Hall Building 2302 USAFA CO
- Zip Code: 80840
- Country: United States
- Zip Code: 80840
- Record
- SN00893413-F 20050914/050912213544 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |