SOLICITATION NOTICE
20 -- Self Locking Nut
- Notice Date
- 10/17/2005
- Notice Type
- Solicitation Notice
- Contracting Office
- N00604 1942 Gaffney Street, Ste 100 Bldg. 475-2, Code 200 Pearl Harbor, HI
- ZIP Code
- 96860-4549
- Solicitation Number
- N0060406T0024
- Response Due
- 10/20/2005
- Archive Date
- 10/25/2005
- Point of Contact
- Richard Thacker 808-471-1078
- Description
- The Regional Contracting Department, Fleet and Industrial Supply Center (FISC), Pearl Harbor, Hawaii intends on awarding a single, firm-fixed price contract for the acquisition of the following noted line items. Please annotate Solicitation No. N00604-06-T-0024. This is a combined synopsis/solicitation for the acquisition of commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this announcement. THIS ANNOUNCEMENT CONSTITUTES A SOLICITATION; PROPOSALS ARE BEING REQUESTED AND A WRITTEN SOLICITATION is listed in the solicitation notice. This procurement is 100% set-aside for small business concerns. The NAICS code and the small business size standard for this procurement is 332722 and 500 employees respectively. The FSC Code is 5310. Award will be conducted under the provisions of FAR Part 12 – Commercial Item and FAR 13.5 – Simplified Acquisition Procedures. All prospective quoters are respo! nsible for monitoring this site for the release of amendments (if any) or other information pertaining to this solicitation. All responsible sources may submit a quotation in response to this synopsis, which shall be considered. This synopsis/solicitation is being issued as a Request For Quotations (RFQ), for a Firm Fixed Price type contract incorporating provisions and clauses in effect through Federal Acquisitions Circular 2005-06 and DFARS Change Notice 20051011. The Regional Contracting Department, Pearl Harbor, Hawaii intends to award a single, firm fixed price contract for: ITEM 0001: NUT ITEM 0001AA: QUANTITY: 50 EA 2"-4-1/2UNC-2B, SELF LOCKING NUT, CRES, AMS QQ-S-763 JUL98, CL-304, NASM21046 STYLE-B, SILVER-PLATED PIECE 25 NUT; HEX SELF-LOCKING; ALL METAL DESIGN; 2"-4 1/2UNC-2B CRES AMS QQ-S-763 DTD JULY1998 CLASS 304; ANY CONDITION/FINISH ACCEPTABLE. MANUFACTURER TO CERTIFY MATERIAL CLASS, CONDITION AND FINISH SUPPLIED. DIMENSIONS ARE AS FOLLOWS: ACROSS FLATS 3.127" -3.112", ACROSS CORNERS 3.552", OVERALL HEIGHT 2.009" MAX, WASHER FACE 3.112" AND 2.065". AXIAL STRENGTH 300,000. NUT IS COVERED BY NATIONAL AEROSPACE STANDARD (NAS) NASM21046 DTD NOV1999 STYLE B, BUT SIMILAR IN DESIGN AND SHALL AT LEAST MEET THE LOCKING TORQUE REQUIREMENTS OF THE 11/4" -12UNJF-3B SIZE PER NASM25027 SEP1999 AND SPECIFIED HEREIN. ORDERING DATA: 1) NUTS ARE TO BE SELF LOCKING; HEXAGON; REGULAR HEIGHT; CORROSION RESISTANT STEEL GOOD FOR 800 DEF F. 2) THE THREADS TO BE SILVER PLATED IN ACCORDANCE WITH SAE-AMS2410J. 3) PRESERVATION, PACKAGING AND PACKING SHALL BE LEVEL-C 4) MARKING REQUIREMENTS (1/4" DIAMETER AND LARGER) EACH FASTENER SHALL BE MARKED WITH A MATERIAL IDENTIFICATION CODE AS SPECIFIED BELOW: A) EACH FASTENER SHALL BE MARKED WITH THE CODE "B8" FOR CLASS 304. B) MARKINGS SHALL NOT INTERFERE WITH THE USABILITY OF THE FASTENER AND SHALL BE LOCATED SO THAT WHEN PROPERLY INSTALLED THE MARKING WILL BE VISIBLE. C) MARKINGS MAY BE ACCOMPLISHED BY THE FOLLOWING METHODS: 1) EMBOSSING (RAISED CHARACTERS) 2) IMPACT DIE STAMP WITH LOW-STRESS ROUND BOTTOM DIES (NOT TO BE IN HIGH STRESS AREAS. 3) EASH FASTENER SHALL BE PERMANENTLY MARKED WITH A TRADEMARK OR OTHER SYMBOL OR DISTINCTIVE MARK REGISTERED WITH THE INDUSTRIAL FASTENERS INSTITUTE TO IDENTIFY THE MANUFACTURER. NUT IS SIMILAR TO SPS TECHNOLOGIES PART NUMBER 59 FN 3204 BUT MATERIAL SHALL BE CRES CL-304. ADDITIONAL REQUIREMENT: VENDOR TO PROVIDE A FULL CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES REPORT ITEM 0001AB: Cerfication is required as specified in paragraph 5.2 QA No. 133-1 dated 22 Apr 2005. (2 copies of certification is required) Quotes shall be FOB Destination, Pearl Harbor, Hawaii 96860. All qualified responsible sources may submit a quotation, which shall be considered by the agency. Contractor must be registered in the Central Contractor Registration Database (CCR) to be eligible for Department of Defense Contract awards. Lack of registration in the CCR database will make an offeror/quoter INELIGIBLE FOR AWARD. Please ensure compliance with this regulation when submitting your quote. Call 1-888-227-2423 or visit the Internet site http://www.ccr.gov/ for more information. All prospective quoters interested in submitting a proposal for this solicitation shall include their name, address, telephone number and point of contact, fax number, e-mail address and commercial and Government Entity (CAGE) code. Quotations are due 4:00 p.m., Hawaii Standard Time, on Oct 20, 2005. PROPOSALS SHOULD SUPPLY AN EMAIL ADDRESS OF THE QUOTER IF ONE IS AVAILABLE. Facsimile proposals will be accepted at (808) 474-5223; may be mailed to Regional Contracting Department, Fleet and Industrial Supply Center, Code 202.RT Attn: Richard Thacker, 667 Safeguard St., Ste 100, Regional Contracting Department, Shipyard Support DET, Pearl Harbor, HI 96860-5033; or e-mailed to Richard.a.thacker@navy.mil NOTE: THIS NOTICE WAS NOT POSTED TO WWW.FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (17-OCT-2005); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.fbo.gov/spg/DON/NAVSUP/N00604/N0060406T0024/listing.html)
- Record
- SN00916988-F 20051019/051017212330 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |