SOURCES SOUGHT
66 -- Composite Fixturing and Assembly Table
- Notice Date
- 10/24/2005
- Notice Type
- Sources Sought
- Contracting Office
- US Army ARDEC, AMSTA-AR-PC, Picatinny Arsenal, New Jersey 07806-5000
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-06-X-0521
- Response Due
- 11/4/2005
- Archive Date
- 12/4/2005
- Description
- The US Army TACOM-ARDEC, Picatinny Arsenal, NJ is seeking sources for a Composite Fixturing and Assembly Table to provide fabrication of large composite wrapped components for a precision fixturing and assembly table need for hold pieces at location while curing to a finished state. The table shall handle up to 2,000 lb load an overall size to a complete canon tube up to 24 ft in length. The table shall be a comfortable height for working on components and the surface shall have details that would allow for bolting down various fixturing components such as vices. The specifications are 1) Table size minimum is 3 ft deep by 24 ft in length. This could be accomplished by joining no more than two 12 foot table assemblies joined end to end. 2) Tabletop surface flatness shall be minimum .004??? over 2 square feet. 3) The table supporting components of such size and weight while still holding the desired tolerances leads to a thick (min. 12 inch) table top incorporating a ???honeycomb??? type core. 4) Table top shall be a 410 stainless faceplate no less than .19??? in thickness. 5) The entire tip surface of the table shall ha a grid of ?????-20 tapped holes on 1??? centers. 6) The table top(s) shall be supported by a set of eight rigid support legs giving the whole table a finished height of 30??? from floor to table top surface. Interested firms who feel they are capable of supplying the above component are invited to indicate their interest by providing specifications, brochures and/or drawings within 10 days of the date this notice (24 October 2005) to US Army ATTN: Margaret Rhinesmith, AMSTA-AQ-APE, Bldg 10, Picatinny, New Jersey 07806-5000, email: margaret.rhinesmith@us.army.mil. Any technical questions that you may have should be directed to the POC via email. All responses must include company name, address, POC, phone number, fax number, email address, business size, taxpayer identification number, DUNS number and Cage code. All contractors must be registered in the Central Contractor Registration at: http://www.ccr.dlis.dla.mil/ccr/scripts/index.html. This is a sources sought notice for planning purposes only. This is not a solicitation and is not to be construed as a commitment by the government. Submittal of information is requested via electronic mail only to margaret.rhinesmith@us.army.mil. See Numbered Notes 25.
- Web Link
-
US ARMY TACOM-Picatinny Procurement Network
(http://procnet.pica.army.mil/dbi/Download/GoGetSourcesSought.cfm?SolNum=W15QKN-06-X-0521)
- Record
- SN00920094-W 20051026/051024211932 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |