SOLICITATION NOTICE
47 -- Manufacturing of tubes as replacement parts in the rehabilitation of heat exchangers that are used to cool hydroelectric turbine generators.
- Notice Date
- 11/2/2005
- Notice Type
- Solicitation Notice
- NAICS
- 332999
— All Other Miscellaneous Fabricated Metal Product Manufacturing
- Contracting Office
- Portland District, US Army Corps of Engineers, Contracting Division (CENWP-CT_, P.O. Box 2946, Portland, OR 97208-2946
- ZIP Code
- 97208-2946
- Solicitation Number
- W9127N-06-Q-0009
- Response Due
- 11/17/2005
- Archive Date
- 1/16/2006
- Small Business Set-Aside
- N/A
- Description
- The US Army Corps of Engineers, Portland District, intends to award a supply type contract to manufacture tubes which will be used as replacement parts in the rehabilitation of heat exchangers that are used to cool hydroelectric turbine generators. River water will run through the tubes while air passes around the outside. The manufactured tubes are to be delivered to The Dalles Dam powerhouse, which is located at exit 88, on Interstate Highway 84, near the Dalles, Oregon. The contract consists of two (2) contract line items (CLINs) of 1,392 tubes each, which are to be manufactured and delivered 120 days after date of contract (ADC). Tubes are to be 74 inches long by 5/8 inches (nominal) and are belled to 1.5 inches on one end to facilitate removal and replacement without disturbing remaining tubes. Tubing shall be made of 90/10 CuNi conforming to ASTM B111 for copper alloy. Tubing OD shall be 0.750 inches (5/8 in. nominal) with a minimum wall thickness of 0.049 in. to a maximum of 0.065 in. Tube s shall be belled on one end to fit existing tube sheets. The tubing shall be finned, and the fins shall be copper and shall be soldered. Fins shall be spaced at nine (9) fins per inch. The outside diameter of the fin shall be 1.484 in. and the fin thic kness shall be a minimum of 0.012 inches to a maximum of 0.016 inches. Manufacturer's specifications of the proposed finned tubing shall be submitted as part of the bid. The contractor shall prepare all tubes for shipment to the government in such a mann er as to insure adequate protection from damage in transit, and shall be responsible for and make good any or all damage that may occur prior to acceptance by the government at the specified delivery point. The administrative/contracting point of contact is Ray Greenheck, at (503) 808-4616. The Request for Quote (RFQ) will be issued on the EBS website, on or about 2 November 2005, and the tentative quote due date is 17 November 2005, this procurement is unre stricted. To request a copy of the RFQ, register on line at https://www.nwp.usace.army.mil/ebs . In order for contractors to conduct business with the Department of Defense, the contractor must provide registration information to the Central Contractor R egistration (CCR). Contractors can access the CCR for free at http://www.ccr.gov/ . **NAICS: 332999; FSC: 4710; SIC: 3499; Small Business Size Std is 500**
- Place of Performance
- Address: The Dalles/John Day Project-Warehouse I-84, Exit 88, PO Box 564 The Dalles OR
- Zip Code: 97058-9998
- Country: US
- Zip Code: 97058-9998
- Record
- SN00925239-W 20051104/051102212250 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |