MOD | C | Multidiscipline Design or Other Professional Serices required to support Military Construction Projects within the Southwestern Region (primarily for the Fort Worth District)

FBO DAILY ISSUE OF DECEMBER 18, 2005 FBO #1483
MODIFICATION

C -- Multidiscipline Design or Other Professional Serices required to support Military Construction Projects within the Southwestern Region (primarily for the Fort Worth District)

Notice Date: 12/16/2005
Notice Type: Modification
NAICS: 541330 — Engineering Services
Contracting Office: US Army Engineer District, Fort Worth, PO Box 17300/819 Taylor Street, Fort Worth, TX 76102-0300
ZIP Code: 76102-0300
Solicitation Number: W9126G-06-R-0018
Response Due: 1/17/2006
Archive Date: 3/18/2006
Small Business Set-Aside: N/A
Description: The following is the additional requirements for the previously submitted announcement. 4. Submittal Requirement: Submittals shall be sent to: US Army Corps of Engineers, Attn: Kathren Santikos, Room 4A17, 819 Taylor Street, Fort Worth, Texas 76102-0300 (P.O. Box 17300). (a) Interested firms having the capabilities to perform this work must submit one copy of SF 330 (6/2004 Edition), as indicated below to the above address not later than 3:00 p.m. (Central Time) on 17 January 2006. Regulation requires that the Government not consider any submittals received after this time and date. Lat e proposal rules found in FAR ? 15.208 will be followed for submittals received late. Submission by telephonic facsimile and electronic mail will not be accepted. (b) Responding firms must submit a copy of a current (signed within the past 12 months) and accurate SF 330, Part II for themselves and each proposed consultant even if an SF 330, Part II is already on file. All SF 300, Part IIs must be signed with an original signature and dated. No electronic or typed signatures will be accepted. SF 330, Part II shall be provided for the specific prime, other offices of the prime and subcontractor offices proposed to perform the work. Indicate in Block 3b of each SF 330, Part II if the firm is a Large, Small and Disadvantaged or Woman-Owned Small Business. T o be classified as a small business, a firms average annual receipts or sales for the preceding three fiscal years must not exceed $4 million. (c) Submit only one SF 330, Part I for the design team, completed in accordance with the SF 300 instructions. It must contain information in sufficient detail to identify the team (prime, other offices of the prime firm and consultants) proposed for the contract. The lead firm on the team is the prime contractor. If the prime has more than one office, every one o f its offices listed in Section C would be considered both a prime and a branch office. If the submittal is by a joint-venture, than the various key offices of the joint-venture listed would be considered both J-V partner and a branch office. If a subcont ractor has more than one office, every one of its offices listed in Section C would be considered both subcontractor and a branch office. The A-E shall not include company literature with the SF 330. (d) In Block No. 2a of the SF 330, Part II, provide the Dun and Bradstreet Number (DUNS) for the prime A-E or Joint Venture. The DUNS number must be for the firm performing the work; i.e., not the parent company DUNS number if the firm has branches, but a DUNS number specifically for the office, prime or bran ch performing the work. Each branch office, joint venture and/or subcontractor must have their own DUNS number. For assignment of DUNS numbers, contact the Dun and Bradstreet office at 1-866-705-5711 or via the Internet at http://www.dnb.com. The DUNS pr ocedures replace the previous ACASS system/procedures. e) In Block C of the SF 330, Part I, identify the discipline/service to be supplied by each consultant. Provide brief resumes in Block E of the on-staff or consultant employees you intend to use to pe rform the work. Resumes must be submitted for each employee required to meet the minimums stated above in paragraph 3b. In Block G-26, along with the name, include the firm/location the person is associated with. The names of all individuals included in the resumes in Section E shall be listed in Block G-26 along with their firm location and their roles even if example project experience in Block G-28 is not applicable. Also, include a Team Project Organizational Chart for each firm proposed. (f) A maxim um of 10 projects including the prime and consultants will be reviewed in Part I, Block F. Use no more than one project per page. (g) In Block H of the SF 330, Part I, provide a narrative to address each of the requirements, to include a draft Design Qua lity Control (DQC) Plan. It shall include a brief presentation of internal controls and procedures that you use to insure that a quality design is produced. DOD awards shall be shown in an itemized summary including Agency, Contract Number/Task Order No., Project Title, and Award Amount dollars. Include a total of al l listed awards. Note that award of Indefinite Delivery Contracts should not be counted as award amounts; only actual Task Orders and any modifications thereto should be included in the amounts. When addressing Team capabilities, clarify planned capabili ty, existing capability, and prior experiences if any. Include any other relevant information including a short discussion of why the firm is especially qualified based upon the specific selection criteria listed in Section 3. Do not exceed twenty (20) p ages for Block H. (h) Submittals shall be prepared using Standard English and must be written in a concise, yet clear and informative style. Submittals shall us a minimum 10 point Arial style font in preparing narrative elements and a minimum 10 point Ari al style font in preparing tables. Submissions shall not include color elements although italics and/or underlining are acceptable for emphasis. (i) Front and back side use of a single page will count as 2 pages. Pages in excess of the maximum will be dis carded and not used in evaluation of the selection criteria. Maximum page size shall be 8x11. (j) Personal visits to discuss this announcement will not be scheduled. (k) Solicitation packages are not provided for A-E contracts and no additional project i nformation will be given to firms during the announcement period. Facsimile transmissions will not be accepted. Points of Contact: Contracting Leslie Guy, (817) 886-1080, Technical Kathren Santikos (817) 886-1677, e-mail your questions to US Army Engine er District, Fort Worth Military at: leslie.e.guy@swf02.usace.army.mil
Place of Performance: Address: US Army Engineer District, Fort Worth PO Box 17300/819 Taylor Street, Fort Worth TX; Zip Code: 76102-0300; Country: US
Record: SN00953816-W 20051218/051216212247 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

C -- Multidiscipline Design or Other Professional Serices required to support Military Construction Projects within the Southwestern Region (primarily for the Fort Worth District)