MODIFICATION
15 -- 15-Platform Assembly, Troop Toilet
- Notice Date
- 1/9/2006
- Notice Type
- Modification
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- Defense Logistics Agency, Logistics Operations, Defense Supply Center Richmond, 8000 Jefferson Davis Highway, Richmond, VA, 23297-5000
- ZIP Code
- 23297-5000
- Solicitation Number
- SPM4A7-06-R-0093
- Response Due
- 1/17/2006
- Archive Date
- 2/1/2006
- Small Business Set-Aside
- Total Small Business
- Description
- 1560-00-670-6784, Platform Assembly, Troop Toilet-the item description has been changed to read as follows: PLATFORM ASSEMBLY,TROOP TOILET EXCEPTION DATA USE STP51-302 I/L/O 1241 USE STP54-101 I/L/O 0521 USE STP60-505 I/L/O 0101 USE STP51-400 I/L/O 0701 USE DS30001 I/L/O G620 FINISH: "M" PASSIVATE PER ASTM A-380. EPOXY PRIMER PER MIL-PRF-23377, TYPE 1, CALSS C. LACQUER VINAL PER STM37-405 TYPE I, COLOR PER DRAWINGS. CHEM FILM PER STP58-405 SPARES: PER B/P. MARK IAW MIL-STD-130K, DATED 15 JAN 00. CONFIGURATION CONTROL APPLIES SEE CLAUSE 52.246-9G36 (SECTION I). FIRST ARTICLE/PREPRODUCTION APPROVAL REQUIRED GOVERNMENT TESTING. SAMPLE QUANTITY SHALL CONSIST OF TWO (2) COMPLETE UNITS. TESTING IS FOR CONFORMANCE TO DRAWING SPECIFICATIONS AND AND SHALL INCLUDE: A) DIMENSIONAL VERIFICATION B) DESTRUCTIVE ANALYSIS OF ONE (1) UNIT TO DETERMINE PLATING, MATERIAL GRADE, COMPOSITION, HEAT TREATMENT, AND HARDNESS. C) FIT, FORM AND FUNCTION OF ONE (1) UNIT. SAMPLES SHALL BE MARKED "FIRST ARTICLE-DO NOT POST". SEND SAMPLES, A COPY OF THE CONTRACT, COPIES OF ASSOCIATED MATERIAL CERTIFICATIONS, AND COPIES OF ALL IN-PROCESS INSPECTION REPORTS TO: FD2060 DLA CENTRAL RECEIVING DDWG ER SPECIAL HANDLING, FIRST ARTICLE UNIT 455 BYRON STREET ROBINS AFB, GA 31098-1887 SEND INSPECTION REPORTS TO: 402 MXSG/MXRILM Attn: First Article Test Lab 450 Third St. Bldg. 323 Robins AFB, GA. 31098-1640 AN "EXPORT CONTROL" TDP EXISTS FOR THIS NSN. THE TDP WILL ONLY BE RELEASED TO EXPORT CONTROL CERTIFIED REQUESTORS. ELIGIBLE REQUESTORS SHOULD SUBMIT TDP REQUESTS VIA THE FOLLOWING WEBSITE: https://dbi.dscc.dla.mil. IF EXPORT CONTROL CERTIFICATION IS REQUIRED, REQUEST A DD FORM 2345, MILITARY CRITICAL TECHNICAL DATA AGREEMENT, FROM DEFENSE LOGISTICS SERVICES CENTER, WWW.DLIS.DLA.MIL. 1. ALL GOVERNMENT DOCUMENTS REFERENCED IN THIS DATA PKG ARE STIPULATED IN DOD INDEX OF SPECS AND STANDARDS. COPIES OF SPECS LISTED IN DODISS CAN BE OBTAINED BY WRITING TO THE DEPT OF DEFENSE SINGLE STOCK POINT (DODSSP), 700 ROBBINS AVE, BLDG #4, SEC D, PHILADELPHIA, PA, 19111-5098. TELEPHONE NUMBER FOR SPECIAL ASSISTANCE CUSTOMER SERVICE IS (215) 697-2179, FAX NUMBER (215) 697-1462, WEBSITE, HTTP://WWW.DODSSP.DAPS.MIL. 2. WHEN A CANCELLED GOVT DOCUMENT IS SUPERSEDED BY ANOTHER DOCUMENT, THE SUPERSEDING DOCUMENT WILL BE IN EFFECT UNLESS OTHERWISE SPECIFIED. IN THE EVENT THERE IS NO SUPERSEDING DOCUMENT, OFFERORS MAY SUBMIT, AT THEIR DISCRETION, ALTERNATIVES TO THE SUPERSEDED OR CANCELLED GOVT DOCUMENTS CITED IN THE TECHNICAL DATA PACKAGE. UNLESS THE ALTERNATIVE IS SPECIFICALLY APPROVEDBY THE GOVT, THE SUPERSEDED OR CANCELLED DOCUMENT SHALL REMAIN FULLY APPLICABLE. 3. AS APPLICABLE, ALL CONTRACTOR DOCUMENTS WHICH REFERENCE QUALIFICATION BY THE PRIME ARE CHANGED TO READ "QUALIFICATION BY THE GOVT". THIS DATA PACKAGE CONTAINS THE OUTLINE DIMENSIONS AND PERFORMANCE REQUIREMENTS NECESSARY TO MANUFACTURE THIS ITEM. THE SUCCESSFUL BIDDER MUST HAVE THE ENGINEERING CAPABILITIES NECESSARY TO FABRICATE, TEST, AND FURNISH AN ACCEPTABLE AIR FORCE SPARE WHILE COMPLYING WITH ALL PERFORMANCE SPECIFICATIONS. THE FINISHED PRODUCT(S) MUST MEET FORM, FIT, AND FUNCTION REQUIREMENTS. THESE DOCUMENTS CONTAIN A LEGEND IDENTIFYING THE DATA AS PROPRIETARY TO THE LOCKHEED AIRCRAFT CORP (LAC). LAC AUTHORIZED THE GOVERNMENT TO USE THE DATA IN THE PROCUREMENT OF AIRCRAFT SPARES AND MAINTENANCE. ACCORDINGLY, THE DATA MAY BE USED IN THE MANUFACTURE OF THE PART(S) INDENTIFIED HEREIN. 1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ Z1.4-2003. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED. 2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. SEE AMPL/HERS FOR CAGE - P/N 100% Small Business Set-Aside. Government First Article of 2 complete units applies. 100% quantity option. FOB Destination/Origin Inspection. Offerors must be registered in the Online Representations and Certifications Application database (http://orca.bpn.gov) to be considered for award.
- Place of Performance
- Address: 8000 Jefferson Davis Highway, Richmond, VA
- Zip Code: 23297-5800
- Zip Code: 23297-5800
- Record
- SN00963238-W 20060111/060109211645 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |