MODIFICATION
23 -- FY06 PROCUREMENT OF VEHICLES
- Notice Date
- 1/17/2006
- Notice Type
- Modification
- NAICS
- 336111
— Automobile Manufacturing
- Contracting Office
- Department of the Navy, Naval Facilities Engineering Command, NAVFAC Pacific, OICC Sasebo, Sasebo Naval Base, Building 320 Hirase-cho, Sasebo, AP, 857-0056
- ZIP Code
- 00000
- Solicitation Number
- N40084-06-T-6012
- Response Due
- 2/1/2006
- Archive Date
- 2/16/2006
- Point of Contact
- Hirokazu Toyofuku, Contract Specialist, Phone 252-2395, Fax 252-3769, - Hirokazu Toyofuku, Contract Specialist, Phone 252-2395, Fax 252-3769,
- E-Mail Address
-
hirokazu.toyofuku@sasebo.navy.mil, hirokazu.toyofuku@sasebo.navy.mil
- Description
- This sysnopsis amends the solicitation/advertisement for this requirement, which was orignally synopsized and published on 17 January 2006. The following information is to be added to the requirement. CONTRACT LINE ITEM 0005: Truck, tractor, 4x2, 2 door, 2 or 3 passengers, diesel engine driven, loading capacity of fifth wheel 9,000kg, manual transmission, air conditioning, right hand drive, high roof cabin, full cabin: (1) ECC: 0614‑0J; (2) Quantity: 1 each: Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture. The Government reserves the right to accept alternate specifications as noted below. B.DIMENSION and CAPACITY: Wheel Base: 3,150mm (124.0in) minimum; Loading Capacity of Fifth Wheel: 9,000 kg (19,845lb) minimum. C. REQUIREMENTS: (1) Exterior Color: Manufacturer?s standard; (2) Engine: Diesel engine, minimum 400PS; (3) Transmission System: Manual transmission; (4) Suspension: Air suspension at rear axis; (5) Coupler Height Control System: Manufacturer?s standard; (6) Cabin: High roof and full cabin type; (7) Fuel Tank Capacity: Minimum 400 liter, including sub fuel tank; (8) Tire: Manufacturer's standard; (9) Electrical System: Manufacturer's standard; (10) Air Conditioning: Manufacturer's standard; (11) Radio: Manufacturer's standard; (12) Heater: Manufacturer's standard; (13) Seat Belt: Shall be installed on driver's seat and all passenger seats; (14)Air Bag: Shall be installed for driver's seat, (15) Steering: Power steering; (16) Speedometer/Odometer: Manufacturer's standard (in kilometer); (17) Side Marker Lamp and Tire Lamp: Manufacturer's standard; (18) Voice Alarm (Work while turn left and back): Shall be installed; (19) Working Light: Manufacturer's standard; (20) Tool Box: Made by stainless steel; (21) Floor Mats: Manufacturer's standard; (22) Triangle Reflector: One (1); (23) Tire Chain: One (1) set; (24) Warranty: Manufacturer's standard. The warranty work will be provided by dealers around Sasebo area, Japan; (25) Technical Publications: One (1) certificate of transfer for each vehicle, one (1) sets of operator manual(Japanese) for each vehicle, one (1) set of Technical (shop repair) manuals and part catalog(Japanese) for each vehicle, to be furnished by Contractor at time of vehicle delivery; (26) Accessories: Shall be the type installed on manufacturer's standard domestic production model. D. INTENDED USE: The vehicles covered by this specification are intended for general administrative use by the U. S. Government in transporting personnel/cargo. The vehicles furnished hereunder shall be delivered ready for immediate use. E. SAFETY: Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements. F. DELIVERY POINT: All transportation charges borne by the contractor to the Transportation Officer, NAVFAC FE, Transportation, Sasebo Detachment, Bldg.203, Mr. Morisawa, Tel 0956-50-3534. G. DELIVERY DATE: The vehicle shall be delivered at the delivery point specified above within 120 calendar days after date of contract award. CONTRACT LINE ITEM 0006: Semi-trailer, loading capacity 20,000kg, overall flat bed, 2 axles, dual wheels, air suspension, air service brakes, parking brake, with front guard frame, without side gate. (1) ECC: 0816-00; (2) Quantity: One (1) each, Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture. The Government reserves the right to accept alternate specifications as noted below. B. DIMENSION and CAPACITY: Overall Length 12,800mm (503.9in) minimum; Overall Width 2,480mm (97.6in) minimum; Cargo Bed Height 1,300mm (51.2in) maximum; Loading Capacity 20,000kg (44,100lb) minimum. C. REQUIREMENTS: (1) Exterior Color: Manufacturer?s standard silver; (2) Tire: 8ea ( = 2 axes x 4 tires ) and one (1) spare tire; (3) Suspension: Air suspension; (4) Front Guard Frame (Torii): Steel frame, with wooden pad, with ladder and working light on each side; (5) Cargo Bed Material: Wood; (6) Electrical System: DC 24 volt type; (7) Side Bumper: Manufacturer's standard; (8) Concealable Hook: 1-ton type. Approximately 300mm pitch on each side of cargo bed; (9) Twistable Hook: 3-ton type. Approximately 1,000mm pitch on each side of cargo bed; (10) Concealable Twist Lock for Container: 2 set for 20 feet container and 1 set for 40 feet container; (11) Side Hook: 1-ton type. Approximately 300mm pitch on each side of body;(12) Side Marker Lamp and Tire Lamp: Manufacturer's standard;(13) Turn Signal Lamp and Back Lamp: Manufacturer's standard; (14) Back Buzzer: Manufacturer's standard; (15) Back Eye Camera(color) with Liquid Crystal Monitor(color): Manufacturer's standard; (16) Mesh Box: Manufacturer's standard; (17) Tool Box: 4ea. Made by stainless steel; (18) Vehicle License Plate Holder : Front side and Rear side, manufacturer's standard; (19) Accessories: Shall be the type installed on manufacturer's standard domestic production model; (20) Warranty: Manufacturer's standard. The warranty work will be provided by dealers around Sasebo area, Japan; and (21) Technical Publications: One (1) certificate of transfer for each vehicle, one (1) set of operator manual(Japanese) for each vehicle, one (1) set of Technical (shop repair) manuals and part catalog(Japanese), to be furnished by Contractor at time of vehicle delivery. D. INTENDED USE: The vehicles covered by this specification are intended for general administrative use by the U. S. Government in transporting cargo. The vehicles furnished hereunder shall be delivered ready for immediate use. E. SAFETY. Each vehicle shall comply with Japanese domestic safety control requirements. F. DELIVERY POINT. All transportation charges borne by the contractor to the Transportation Officer, NAVFAC FE, Transportation Department, Sasebo Detachment, Japan, Bldg.203, Mr. Morisawa, Tel 0956-50-3534. G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 120 calendar days after date of contract award. CONTRACT LINE ITEM 0007: Semi-trailer van(fully enclosed), loading capacity 19,000kg, 2 axles, dual wheels, double decking over full width gooseneck, aluminum skin, wing roof, double rear door, air suspension, air service brakes and parking brake. (1) ECC: 0817-00; (2) Quantity: One (1) each. Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture. The Government reserves the right to accept alternate specifications as noted below. B. DIMENSION and CAPACITY: Overall Length: 12,800mm(503.9in) minimum; Overall Width 2,480mm (97.6in) minimum; Overall Height: 3,700mm (145.7in) minimum; Cargo Bed Height at Lower Portion: 1,200mm (47.2in) maximum Loading Capacity:19,000kg (41,895lb) minimum. C. EQUIREMENTS: (1) Exterior Color: Manufacturer?s standard silver; (2) Aluminum Skin Wing Roof: Manufacturer's standard; (3) Side Gate Open/Close Assist Device: Manufacturer's standard; (4) Tire: 8ea ( = 2 axes x 4 tires ) and one (1) spare tire; (5) Suspension: Air suspension; (6) Wooden Cargo Bed: Manufacturer's standard; (7) Electrical System: DC 24 volt type; (8) Side Bumper: Manufacturer's standard; (9) Concealable Hook: 1-ton type. Approximately 300mm pitch on each side of cargo bed; (10) Twistable Hook: 3-ton type. Approximately 1,000mm pitch on each side of cargo bed; (11) Rushing rail and Rushing Belt: Shall be installed on inside of side gate and wing roof; (12) Side Marker Lamp and Tire Lamp: Manufacturer's standard; (13) Turn Signal Lamp and Back Llamp: Manufacturer's standard; (14) Back Buzzer: Manufacturer's standard; (15) Back Eye Camera(color) with Liquid Crystal Monitor(color): Manufacturer's standard; (16) Working Light: Manufacturer's standard; (17) Mesh Box: Manufacturer's standard; (18) Tool Box: 4ea. Made by stainless steel; (19) Vehicle License Plate Holder : Front side and Rear side, manufacturer's standard; (20) Warranty: Manufacturer's standard. The warranty work will be provided by dealers around Sasebo area, Japan; (21) Technical Publications: One (1) certificate of transfer for each vehicle, one (1) sets of operator manual(Japanese) for each vehicle, one (1) set of Technical (shop repair) manuals and part catalog(Japanese) for each vehicle, to be furnished by Contractor at time of vehicle delivery; and (22) Accessories: Shall be the type installed on manufacturer's standard domestic production model. D. INTENDED USE The vehicles covered by this specification are intended for general administrative use by the U. S. Government in transporting cargo. The vehicles furnished hereunder shall be delivered ready for immediate use. E. SAFETY Each vehicle shall comply with Japanese domestic safety control requirements. F. DELIVERY POINT All transportation charges borne by the contractor to the Transportation Officer, NAVFAC FE, Transportation, Sasebo Detachment, Bldg.203, Mr. Morisawa, Tel 0956-50-3534. G. DELIVERY DATE The vehicle shall be delivered at the delivery point specified above within 120 calendar days after date of contract award. CONTRACT LINE ITEM 0008: Farm tractor, wheeled, 4x4, cabin type, rear mounted PTO, air conditioner: (1) ECC: 4875‑00; (2) Quantity: 1 each. Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture. The Government reserves the right to accept alternate specifications as noted below. B. DIMENSION and CAPACITY: Overall Length: 3,500mm (137.8in) minimum; Overall Width: 1,500mm (59.1in) minimum; Overall Height:2,400mm (94.5in) minimum; Self-weight: 2,200 kg (4,851lb) minimum. C. REQUIREMENTS: (1) Exterior Color: Manufacturer?s standard; (2) Engine: Diesel engine, minimum 55PS; (3) Main Transmission System: Clutch-less type; (4) Tire: Manufacturer's standard lug pattern tire; (5) Electrical System: Manufacturer's standard; (6) Air Conditioning: Manufacturer's standard; (7) Seat Belt: Shall be installed on driver's seat; (8) Steering: Power steering; (9) Speedometer and Hour Meter: Manufacturer's standard; (10) Radio: Manufacturer's standard; (11) Working light: Front side and rear side; (12) Back Buzzer: Manufacturer's standard; (13) Triangle Reflector: One (1); (14) Warranty: Manufacturer's standard. The warranty work will be provided by dealers around Sasebo area, Japan; (15) Technical Publications: One (1) sets of operator manual(Japanese) for each vehicle, one (1) set of Technical (shop repair) manuals and part catalog(Japanese) for each vehicle, to be furnished by Contractor at time of vehicle delivery; and (16) Accessories: Shall be the type installed on manufacturer's standard domestic production model. D. INTENDED USE The vehicles covered by this specification are intended for general administrative use by the U. S. Government in transporting cargo. The vehicles furnished hereunder shall be delivered ready for immediate use. E. SAFETY Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements. F. DELIVERY POINT All transportation charges borne by the contractor to the Transportation Officer, NAVFAC FE, Transportation, Sasebo Detachment, Bldg.203, Mr. Morisawa, Tel 0956-50-3534. G. DELIVERY DATE The vehicle shall be delivered at the delivery point specified above within 60 calendar days after date of contract award.
- Place of Performance
- Address: PSC 476, Box 66 FPO AP 96322-1160 Building 200, Hirase-cho, sasebo, Japan
- Zip Code: 857-0056
- Country: Japan
- Zip Code: 857-0056
- Record
- SN00967684-W 20060119/060117220919 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |