SOLICITATION NOTICE
51 -- TOOL KITS FOR AFRL
- Notice Date
- 3/13/2006
- Notice Type
- Solicitation Notice
- NAICS
- 332212
— Hand and Edge Tool Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, 96th Contracting Squadron (Eglin AFB), 96th Contracting Squadron 205 West D Ave., Suite 541, Eglin AFB, FL, 32542-6862
- ZIP Code
- 32542-6862
- Solicitation Number
- F1TBAZ5350A100Amendment
- Response Due
- 3/17/2006
- Archive Date
- 4/1/2006
- Point of Contact
- Blake High, Contract Specialist, Phone 850-882-0337, Fax (850)882-4916, - Frederick Marsh, ContractingOfficer, Phone 850-882-0334, Fax 850-882-4916,
- E-Mail Address
-
blake.high@eglin.af.mil, frederick.marsh@eglin.af.mil
- Description
- The changes to the initial solicitation are placed in bold and underlined in text below. The 96th Contracting Squadron, Eglin AFB, Florida intends to solicit, and award a Firm-Fixed Price contract for the furnishing of all labor, tools, materials, and facilities to provide nine (9) Tool Kits in support of the Air Force Research Lab at Eglin AFB, FL. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, supplemented with additional information included in this notice. The announcement number is F1TBAZ5350A1. This announcement constitutes the only solicitation; and a written solicitation will not be issued. The North American Industry Classification System (NAICS) code for this acquisition is 332212 with a small business size standard of 500 employees. Please identify your business size in your response based upon this standard. This acquisition is for full and open competition. Off-base workload will include providing labor, tools, materials, and facilities to provide nine (9) Tool Kits in accordance with the attached List of tools and Statement of Objectives. STATEMENT OF OBJECTIVES AIR FORCE RESEARCH LAB (AFRL) TOOL SETS 30 AUGUST 2005 1.0 Program Objective: The objective is to supply, design, test, and manufacture Tool Sets to satisfy the user’s need /performance requirements. 2.0 Contract Objectives. It is an objective of this program that the contract define, as a minimum: 2.1 Design, Analysis, and Test: The design and supply of 9 laser-etched, foam-inlaid, Tool Sets to satisfy the user’s performance requirements. 2.2 Configuration Management: Supply all laser-etched, foam-inlaid tools and when necessary tool cases (see attached list) with the qualities commonly found in tools provided by suppliers of Snap-On Tools or equal. Tool Brands should be standardized to the maximum extent possible. Qualities of the product will be at a minimum heat-treated metals, applicable grade of steel or applicable tool material, surface finish, fit, and tool performance. Tools shall come with a lifetime warranty. Replacement turn-around cannot exceed one week. Laser etch tools large enough to be laser etched and for those too small to be etched legibly shall be stored in laser etched cases. Only one type of tool per case for small tools. Tool sets pre-supplied in cases will be etched along with their case if possible. Laser etch shall be on flat metal surface where applicable. Rubber and/or fiberglass shall not be etched only a non-impact area of metal head should be area of etching. 2.3 Quality Control: The first set of tools shall be supplied to the end user for product layout and specific etching instructions. Once received from the user, the layout design shall be used to inlay in foam all tools on order. It is desired a dual-layered, dual-colored inlay job be utilized. Quality of foam should be that used as the standard quality used from Snap-on or equal. The lower layer of foam should have a thick outer skin. Tool color (handles, etc) should contrast bottom layer of foam. Additional blank sets of foam that fit 2 lower-cabinet drawers (25” x 25”) for each tool set should be provided. Electronic copy of the tool inventory for each set shall be provided in an Excel spreadsheet. Each tool shall have the manufacturer name, model number, part number, drawer, warranty/reorder contact number, list of special options (e.g. color, special adapter etc.) needed to re-order. Tools shall be laser etched with the following 9-digit identification numbers: NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (13-MAR-2006); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.fbo.gov/spg/USAF/AFMC/96thContractingSquadronEglin/F1TBAZ5350A100Amendment/listing.html)
- Place of Performance
- Address: 205 West D Ave, Bldg 350 Ste 542
- Zip Code: 32542
- Country: USA
- Zip Code: 32542
- Record
- SN01005466-F 20060315/060313212143 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |