Loren Data's SAM Daily™

FBO DAILY ISSUE OF APRIL 08, 2006 FBO #1594
MODIFICATION

59 -- Sound System Equipment

Notice Date

4/6/2006
 

Notice Type

Modification
 

NAICS

443112 — Radio, Television, and Other Electronics Stores
 

Contracting Office

Department of the Air Force, Air Education and Training Command, Randolph AFB - 12th Contracting Office, 395 B Street West Suite 2, Randolph AFB, TX, 78150-4525
 

ZIP Code

78150-4525
 

Solicitation Number

F3PT5R6054A100
 

Response Due

4/14/2006
 

Archive Date

4/29/2006
 

Point of Contact

Rodolfo Diaz, Contract Specialist, Phone 210-652-5171, Fax 210-652-7486, - Anthony Smith, Contract Specialist, Phone 210-652-5117, Fax 210-652-2759,
 

E-Mail Address

Rodolfo.Diaz@randolph.af.mil, anthony.smith2@randolph.af.mil
 

Small Business Set-Aside

Total Small Business
 

Description

The 12th Contracting Squadron at Randolph AFB intends to award a contract for the purchase of sound system equipment. Award will be made in accordance with FAR Parts 12 and 13.5 using Simplified Acquisition Procedures (SAP). This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 and 13.5, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being accepted and a written solicitation will not be issued. Solicitation number F3PT5R6054A100 is issued as a request for quotation (RFQ). This procurement is being issued as 100% SMALL BUSINESS SET-ASIDE. This combined synopsis/solicitation incorporates provisions and clauses in effect through Federal Acquisition Circular 01-22&23. The SIC Code is 5731, the NAICS code is 443112, and the size standard is $7.5 mil. The contract is for the purchase of the following sound system equipment: 26 Each - High Out-Put Vertical Line Array Module, 4 Each - High Out-Put Horizontal Line Array Module, 6 Each - Cardioid Dipolar Subbass, 2 Each - Controlled Directivity Subbass, 2 Each ? GEO S Bumper (See illustration on page 4 of attachmnet), 6 Each - Monitor Speaker, 4 Each - Monitor Speaker, 2 Each ? TD Controller,1 Each ? TD Controller, 2 Each ? DPS Controller, 6 Each - CAMCO Vortex 6 Amplifier or equal. All equipment must meet the specifications of the attached specs. Award is anticipated on 21 Apr 06. The following clauses and provisions can be viewed through Internet access at the AF FAR Site, http://farsite.hill.af.mil. Provision 52.212-2, Evaluation - Commercial Items, is also applicable to this acquisition. The specific evaluation factors for this provision is lowest price technically acceptable. The resultant single award shall be placed with the offeror that represents the best value to the Government. FAR 52.212-3, Offeror Representations and Certifications-Commercial Items; 52.219-1, Small Business Program Representations, 52.219-1 Alternate I, Small Business Program Representation, which can be found at http://www.arnet.gov/far.52.212-4, Contract Terms and Conditions- Commercial Items is applicable and paragraph (c) of this clause is tailored as follows: (c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties, with the exception of: Administrative changes such as paying office, appropriation data, etc. 52.212-5, Contract Terms and Conditions - Commercial Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items with these additional FAR clauses marked: 52.203-6, Restrictions on Subcontractor Sales to the Government, 52.219-4, Notice of Price Evaluation Preference for HubZone Small Business Concerns, 52.219-8, Utilization of Small Business Concerns, 52.222-19 Child Labor-Cooperation with Authorities and Remedies, 52.222-21, Prohibition of Segregated Facilities, 52.222-26, Equal Opportunity (E.O. 11246), 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (38 U.S.C. 4212); 52.222-36, Affirmative Action for Handicapped Workers (29 U.S.C. 793); 52.222-37, Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era (38 U.S.C.4212), 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (31 U.S.C. 3332, Required Central Contractor Registration. 52.222-48, Exception from Application of Service Contract Act Provisions for Contracts for Maintenance, Calibration, and/or Repair of Certain Information Technology, Scientific and Medical and/or Office and Business Equipment-Contractor Certification, 52.252-2, Clauses Incorporated by Reference (Feb 1998). DFARS 252.204-7004, Required Central Contractor Registration. DFARS 252.212-7000 Offeror Representations and Certifications/Commercial Items (requires certification) and DFARS 252.212-7001, Contract Terms and Conditions required to Implement Statues or Executive Orders applicable to Defense Acquisition of Commercial Items with these additional FAR clauses marked: 52.203-3, Gratuities, 252.225-7012, Preference for Certain Domestic Commodities, 252.243-7002, Requests for Equitable Adjustment. DFARS 252.225-7002, Qualifying Country Sources as Subcontractors and 252.232-7003 Electronic Submission of Payment Requests. A firm-fixed price award will be made to the responsible offeror submitting the quote that provides the best value to the Government. Interested parties capable of providing the above must submit a written quote to include discount terms, tax identification number, cage code, and firm evidence of their ability to perform. All responses that meet the criteria contained within will be considered. Since award will be based on initial responses, it is encouraged to offer your most advantageous pricing in your initial response. To be eligible to receive an award resulting from this solicitation, contractor must be registered in the DoD Central Contractor Registration (CCR) database, NO EXCEPTIONS. To register, you may call 1-888-227-2423 or apply via the Internet at http://www.ccr.gov. As the award will be made using (SAP), the evaluation procedures at FAR 13.106-2 will be used. All responsible sources may submit a quote. Quotes are due 14 Apr 06 not later then 12:30 P. M., Central Standard Time (CST), and should reference the solicitation listed above. Offerors must include with their quote, a completed copy of the provisions at FAR 52.212-3, Offerors Representations and Certifications-Commercial Items, 52.219-1, Small Business Program Representations, and 52.219-1 Alternate I, Small Business Program Representation and DFARS 252.212-7000, Offeror Representations and Certifications/Commercial Items. POC for this requirement is Ricardo Monroy, 210-652-5117, ricardo.monroy@randolph.af.mil or fax (210) 652-2759.-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------SPEAKER SYSTEM SPECIFICATIONS ------------------------------------------------------------------1. 26 Each - High Out-Put Vertical Line Array Module Components LF 1x 8? (20cm) Neodymium Hi-flux 16? Driver, HF: 1x 1? Throat Neodymium Driver on a Hyperboloid Reflective Wavesource. Height x Width x Depth 428 x 276 x 303mm (16 7/8" x 10 7/8" x 11 7/8"). Shape 5? Trapezoid Weight 13kg (28.6lbs) net. Connectors 2x NL4MP 4-pole SPEAKON (In & Through). Construction Baltic Birch Ply finish with structured black coating. Fittings Grill Perforated Steel. Flying Integral flying system. Intercabinet Angle Adjustments = .31? to 5? (logarithmic steps). Frequency Response [a] 67Hz ? 19kHz ? 3dB. Usable Range @-6dB [a] 60Hz ? 20kHz. Sensitivity 1W @ 1m [b] 99dB SPL Nominal -97dB SPL Wideband. Peak SPL @ 1m [b] Configuration dependent [d].. Dispersion [c] Coupling Plane: Not usable as a single cabinet. Configuration dependent [d]. Non-Coupling Plane 120? (configurable to 80?). Crossover Frequency 1.6kHz Passive Nominal Impedance 16? ------------------------------------------------------------------2. 4 Each - High Out-Put Horizontal Line Array Module Components LF 1x 8? (20cm) Neodymium Hi-flux 16^ Driver. HF: 1x 1? Throat Neodymium Driver on a Hyperboloid Reflective Wavesource. Height x Width x Depth 406 x 250 x 219mm (16? x 9 7/8? x 5 5/8?). Shape 30? Trapezoid Weight 13kg (28.6lbs) net. Connectors 2x NL4MP 4-pole SPEAKON (In & Through). Construction Baltic Birch Ply finish with structured black coating. Fittings Grill Perforated Steel. Flying Integral flying system. Intercabinet Angle Adjustments = 17.5? & 30?. Frequency Response [a] 67Hz ? 19kHz ? 3dB. Usable Range @-6dB [a] 60Hz ? 20kHz. Sensitivity 1W @ 1m [b] 99dB SPL Nominal -97dB SPL Wideband. Peak SPL @ 1m [b] Configuration dependent [d].. Dispersion [c] Configuration dependent [d]. Non Coupling Plane 120? (configurable to 80?). Directivity Index [c] Not usable as a single cabinet. Configuration dependent [d]. Crossover Frequency 1.6kHz Passive. Nominal Impedance 16^ ------------------------------------------------------------------3. 6 Each - Cardioid Dipolar Subbass Components 2x 12? (30cm) Long-excursion Neodymium 6^ Driver. Height x Width x Depth 400 x 600 x 754mm (15 3/4? x 23 5/8? x 29 11/16?). Shape Rectangular. Weight 35kg(78.4lbs) net. Connectors 2x NL4MP 4-pole SPEAKON (In & through). Construction Baltic Birch Ply finish with structured black coating. Flying points Integral flying system.MFrequency Response [a] 42Hz ? 130Hz ?3dB. Usable Range @-6dB [a] 39Hz ? 150Hz. Sensitivity 1W @ 1m [b] 102dB SPL Nominal. Peak SPL @ 1m [b] 131 to 134dB Peak (500 to 1200W RMS Amp). Dispersion [c] Hypercardiod pattern 120? x 120? over the entire usable bandwidth.. Directivity Control is achieved through DSP algorithms in the NX242 Digital TDcontroller (two channels of the NX242 are used for the process).Directivity Index [c] Q = 3.773DI = 5.7dB over the entire usable bandwidth. Crossover Frequency 90 or 130Hz Active through NX242 Digital Tdcontroller Nominal Impedance 2x 6? ------------------------------------------------------------------4. 2 Each - Controlled Directivity Subbass Components 2 x 18? (46cm) long excursion neodymium 8 Ohms driver. Height x Width x Depth 750 x 1200 x 750 mm (29 1/2? x 47 1/4? x 29 1/2?). Shape Rectangular. Weight: Net 116 kg (256 lbs). Connectors 2 x NL4MP SPEAKON 4 pole (In & Through). Construction Baltic birch ply finish with structured black coating. Dark grey carpet finish also available. Flying points Integral flying system. Frequency Response @-3dB [a] 32 Hz ? 80 Hz Usable Range @-6dB [a] 29 Hz ? 180 Hz. Sensitivity 1W @ 1m [b] 105 dB SPL Nominal. Peak SPL @ 1m [b] 145 dB Peak. Dispersion [c] Cardioid or supercardioid pattern over the entire useable bandwidth depending on the NX241 Digital. TDController set up.(two channels of the NX241 are used for the process).. Directivity Index [c] Q=4.3 | DI=6.3 dB and Q=5.3 | DI=7.2 dB over the entire useable bandwidth for respectively cardioid and supercardioid mode.. Crossover Frequency 80 Hz active through NX241 Digital TDController. Nominal Impedance 2 x 8 Ohms ------------------------------------------------------------------5. 2 Each ? GEO S Bumper (Description picture can not be uploaded please email me to receive a copy) ------------------------------------------------------------------6. 6 Each - Monitor Speaker Components : LF 1 x 15? (38 cm) 6 Ohm driver HF 1 x 2? throat, 3? titanium diaphragm, driver + Low Distortion, Constant Directivity Asymmetrical Dispersion Horn. Height x Width x Depth 675 x 434 x 368 mm (26.63 ?x 17.13?x 14.5?) Weight 29 kg (64 lbs) Connectors 3 x NL4MP SPEAKON 4 pole; Passive In Passive Loop Thru, Active In Construction Baltic Birch Ply finished with textured, polyurethane black coating Fittings: Handles 2, integral to cabinet Front finish Acoustic foam on perforated steel grille (77% transparent) Flying Points 1 steel anchor point for flying track on top (9 positions) 2 steel anchor plates for flying track on bottom (3 positions) Stand fittings Built in Stand Fitting, 35mm (1 3/8?) Fixed Installation One set of 4 fixing points (Omnimount 100 Std spacing) Frequency Response [a] 50 Hz - 18 kHz ?3dB (30 Hz - 19 kHz ?3dB with LS1200 Subwoofer) Usable Range @-6dB [a] 47 Hz - 18 kHz (29 Hz - 18 kHz with LS1200 Subwoofer) Sensitivity 1W @ 1m [b] 102 dB SPL Nominal - 99 dB SPL Wideband Nominal Peak SPL @ 1m [b] 131 to 134 dB Peak (for 550 to 1200 W RMS Amp.) HF Dispersion [c] 50? to 100? Hor. x 55? Vert. Rotatable Horn, 4 positions Directivity : Q & DI [c] Q : 16 Nominal DI : 12 dB Nominal ( f > 1.5 kHz ) Crossover Frequencies 900 Hz Passive or Active (internally switchable) Nominal Impedance Passive: 8 Ohms Active; LF 6 Ohms, HF 8 Ohms. ------------------------------------------------------------------7. 4 Each - Monitor Speaker Components : LF 1 x 10? (25 cm) 8 Ohm driver HF 1 x 1? throat driver + Low Distortion, Constant Directivity Asymmetrical Dispersion Horn. Height x Width x Depth 515 x 316 x 277 mm (20.25 x 12.5 x 10.88?) Weight 15 kg (33 lbs) Connectors 2 x NL4MP SPEAKON 4 pole Construction Baltic Birch Ply finished with textured, polyurethane black coating Fittings: Handles 2, integral to cabinet Front finish Acoustic foam on perforated steel grille (77% transparent) Flying Points & 1 steel anchor point for flying track on top (6 positions) Fixed Installation 2 steel anchor plates for flying track on bottom (1 position) Stand fittings Built in Stand Fitting, 35mm (1?3/8) Frequency Response [a] 65 Hz - 20 kHz ?3dB (40 Hz - 20 kHz ?3dB with LS500 Subwoofer) Usable Range @-6dB [a] 58 Hz - 21 kHz (38 Hz - 21 kHz with LS500 Subwoofer) Sensitivity 1W @ 1m [b] 98 dB SPL Nominal - 96 dB SPL Wideband Nominal Peak SPL @ 1m [b] 124 to 127dB Peak (for 200 to 500 W RMS Amp.) HF Dispersion [c] 50? to 100? Hor. x 55? Vert. Rotatable Horn, 4 positions Directivity : Q & DI [c] Q : 16 Nominal DI : 12 dB Nominal ( f > 3 kHz ) Crossover Frequencies 2 kHz Passive Nominal Impedance 8 Ohms ------------------------------------------------------------------8. 2 Each ? TD Controller Audio Inputs Two L&R Audio inputs. Electronically balanced, 36 kOhm. Two XLR-3F connectors. Sense Inputs Three Amplifier Sense Inputs, 180 kOhm. 6 Pole Removable Strip Terminal. Passive Mode, PS15 L&R, LS1200). Active Mode, PS15 LF and HF, LS1200. Audio Outputs Three audio outputs. Electronically balanced, 50 Ohm. Three XLR-3M connectors. Passive Mode, two PS15 L&R, one Mono (L+R) LS1200. Active Mode, one PS15 LF, one PS15HF, one Mono (L+R) LS1200 Controls Front panel: Overlap/Crossover switch, Two Bass EQ trimmers (+/- 3 dB), Three Peak Limiter Adjust trimmers. Three Gain trimmers (+/- 6dB). Back panel: Gain switch (back panel), 3 positions for Amps with Gain : -6 / 0 / +6 dB. Internal: Active/Passive Mode switch. Three Protection trimmers. Indicators Speaker Protect LED?s. Amp Sense & Peak LED?s. Active Mode LED. Power ON LED. Dimensions 1U 19? Rack. 210mm (8.5?) Depth Weight : 3.3 kg (7.3 lbs) netIOutput Level +20 dBm Max. +19dBm Max on 1kOhm Noise -88 dBm (22 Hz - 22 kHz, UnWeighted) THD+N < 0.03% Typ. 0.05 Max for +18dBm Output Power Supply 110/220 Volts (internal wiring), 50/60Hz. Earth-Lift (back panel) ------------------------------------------------------------------9. 1 Each ? TD Controller Audio Inputs Two L&R Audio inputs. Electronically balanced, 36 kOhm. Two XLR-3F connectors. Sense Inputs Three Amplifier Sense Inputs (PS10 L&R, LS500). 150 kOhm. 6 Pole Removable Strip Terminal. Audio Outputs Two L&R PS10 Audio outputs. Electronically balanced, 50 Ohm. Two XLR-3M. One Mono (L+R) LS500 Audio output. Electronically balanced, 50 Ohm. One XLR-3M. Controls Std/Max Protection Trimmer. Gain switch (back panel), 3 positions for Amps with Gain : 26 / 32 / 38 dB. Sub On switch & Sub Gain Control. Indicators Speaker Protect LED?s. Amp Sense & Peak LED?s. Dimensions 1U 19? Rack. 190mm (7.5?) Depth Weight : 2.9 kg (6.6 lbs) net Output Level +20 dBm Max. +19dBm Max on 1kOhm Noise -88 dBm (22 Hz - 22 kHz, UnWeighted) THD+N < 0.03% Typ. 0.05 Max for +18dBm Output Power Supply 110/220 Volts (internal wiring), 50/60Hz. Earth-Lift (back panel) ------------------------------------------------------------------10. 2 Each ? DPS Controller Output Level +28dBu Max into 600^. Dynamic Range All Channels = 110dB. THD+N Output Typ 0.005% @ 1000Hz @ 27dBu. Latency Time 2.2ms flat set-up Output Level 110-220V, 50-60Hz continuous operation (Operating range 90-264V) Audio Inputs 2x L&R Heavy Duty Audio inputs, 24bit convertors; Electronically balanced and floating, 20k?. CMMR=80dB. 2x XLR 3 connectors. Sense Inputs 4x Amplifier Sense-Inputs, 18bit converters; Floating 150k^. 8-Pole Removable Strip Terminal. Audio Outputs 4x audio outputs, 24bit converters, Electronically balanced, 50^. 3x XLR-3M connectors. Processing 24bit data with 48bit accumulator. 100MIPS. Front panel Menu A and Menu B buttons. 16 x 2 character backlit LCD Display. Select Wheel and Enter Button; Four MUTE/SOLO Buttons. Indicators 4x Speaker Protect yelow LEDs. 4x gren Amp Sense LEDs. 4x red Peak LEDs. 4x red Mute LEDs; 2x red LEDs; Input CLIP and DSP CLIP. Rear panel On/Off Mains switch; mains IEC socket; RS232 serial communications connector; Dimensions 1RU(19in) Width, 230mm(9in) Depth Weight 3.8kg(8.8lbs) net System Selection Allows control of all NEXO ranges. System Set-up Within the selected range, allows the cabinet to be set for passive or active mode, aux, mono or stereo subs, wedge or FOH operations depending on system selected. Up to 80x factory pre-sets. Protection Peak Limiter, Displacement and Temperature protection on every channel; Physio control of the Protection limiter & compressors Soft Clip Automatic tracking of amplifier clip point. Delay Up to 150m(465ft.) of delay in 10cm(.4in ) steps; on Sub channel, Main channels or Sub + Main linked. Input Sensitivity Level From 6dB to +12dB in 3dB steps. Output Level Global and inter-channel gain 6dB in 0.5dB steps. Amplifier Gain Reading Allows amplifier gain checking with program material. Mute/Solo Changes front panel buttons from Channel Mute to Solo. Save/Recall Set-up Stores up to 10 user set-ups; On- the-fly recall, without mute or glitches for instant comparison. Array EQ LF or HF shelving filter to compensate ground or stacking effects, +/-6dB Security Mode Password protected in Read-Only Mode. ------------------------------------------------------------------11. 6 Each - CAMCO Vortex 6 Amplifier or equal.
 

Place of Performance

Address: Randolph AFB, TX

Zip Code: 78150

Country: USA
 

Record

SN01022045-W 20060408/060406220614 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |