MODIFICATION
28 -- Duct, Exhaust, Aircraft
- Notice Date
- 4/13/2006
- Notice Type
- Modification
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015
- ZIP Code
- 73145-3015
- Solicitation Number
- FA8104-06-R-0331
- Response Due
- 4/18/2006
- Archive Date
- 5/3/2006
- Point of Contact
- Kittie Richardson, Contract Negotiator, Phone 405-734-8112, Fax 405-734-8106, - Kittie Richardson, Contract Negotiator, Phone 405-734-8112, Fax 405-734-8106,
- E-Mail Address
-
Ruby.Richardson@tinker.af.mil, Ruby.Richardson@tinker.af.mil
- Description
- CANCELLED, Purchased Request, 6 APRIL 2006: Submitted: 29 March 2006. OC-ALC/LPKAA, DIR CONTRACTING/PROPULSION/3001 STAFF DR/STE 1AF1 99A/TINKER AIR FORCE BASE OK 73145-3032. Item: NSN 2840-01-146-9471JF, P/N: 9527M66G02, Duct, Exhaust, Aircraft, Delivery: 8 ea 31 Oct 2008. Purchase Request: FD2030-06-70177; The solicitation number is FA8104-06-R-0331. The solicitation is a request for proposal (RFP). Closing date for proposals will be received at the issuing office until 4:00 PM on 18 April 2006. Qty Range: Min 4 each & Max 10 each. Application: F-101 engine. ies Engine. Destination: Tinker AFB, OK 73145-3032, Material is Steel with dimensions 55.30? min-55.34? max length. 1st vane 3.662? min-3.665?OD. 2nd vane 3.672? min-3.675? OD, 3rd vane 3.682? min-3.685?OD. Revalidation required. Item provides a means of venting sump air from low pressure turbine rear bearing area. Packaging Requirement: MIL-STD-2073-1 D. Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129 P as follows IAW AFMC Form 158. The solicitation will contain instructions for obtaining further information on the requirement. Qualification requirements: Sources must be qualified prior to being considered for award. Qualified source(s) are; (Cage) 07482 General Electric, 1 Neumann Way, Cincinnati, OH 45215-1915, (Cage) 11259 Electro-Jet Tool & Mfg., CO. INC., 10400 Evendale Drive, Cincinnati, OH 45241-2514, Beacon Ind., Inc., 85 Granby Street, Bloomfield, CT. 06002-3594. This solicitation document, incorporated provisions and clauses are those in effect through the Federal Acquisition Circular 97-20 (FAC). The North American Industry Classification System Code (NAICS) is 336412. The qualifications requirements for these items were established prior to 10 OCT 1984 and the requirements of FAR 9.202(A) do not apply. The qualification requirements apply to all line items. The approximate issue date of RFQ will be 18 May 2006. Government Tested, First Article will be required. Only written or faxed request s received directly from the requestors are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation, which shall be considered. Authority: 10 USC 2304(C)(1). Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy the agency requirements. The proposed contract action is for supplies and services for which the government intends to solicit and negotiate with only one, or a limited number source under the authority of the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, the Government will consider all FAR 6.302. All proposals received thirty days (30) days after date of solicitation will be considered by the government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether or not to conduct a competitive procurement. Award will be made only if the offeror, the product/service, or the manufacture meets qualification requirements at the time of the award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements as sited in each individual solicitation. It is that small business firms or other interested in subcontracting opportunities in conjunction with the prescribed procurement make contact with the firm(s) listed. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination price and past performance factors as may be detailed in the solicitation. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and technical capability as detailed in the solicitation. An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting office, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as the source of the concern. The Ombudsman does not participate in the evaluation of proposals or the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requests can be submitted to OC-ALC/PKXDA, Tinker AFB, OK 73145-3015, FAX NUMBER (405) 734-8106. See Note(s) 26. Point of contact (POC) Kittie Richardson, Contract Negotiator, Phone: (405) 734-8114, FAX (405) 734-8106, E mail: ruby.richardson@tinker.af.mil. Notes 22 and 23 apply.
- Record
- SN01027525-W 20060415/060413221452 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |