SOLICITATION NOTICE
99 -- Fence Material - Steel Fence Post, Barbed Wire, Barbless Wire, Wire Fence Stays
- Notice Date
- 4/14/2006
- Notice Type
- Solicitation Notice
- Contracting Office
- BLM-CA NORTHERN CALIFORNIA SUPPORT OFFICE* NORTHERN CALIFORNIA SUPPORT OFFICE 2950 RIVERSIDE DRIVE SUSANVILLE CA 96130
- ZIP Code
- 96130
- Solicitation Number
- BCQ062005
- Archive Date
- 4/14/2007
- Small Business Set-Aside
- Total Small Business
- Description
- Fence Materials NAICS CODE: 332999 All other Miscellaneous Fabricated Metal Product Manufacturing, Product Service Code: 5660 Fencing Fences & Gates (FAC 2005-07) Delivered to the USDI - Bureau of Land Management - Eagle Lake Field Office Ware Yard 1495 5th Street, Susanville, CA 96130 on or before JUNE 22, 2006. 1. 7,200 each Steel Fence Posts with clips(incl 5 clips per post: Posts shall be painted solid green, "T" bar type, with a welded or riveted anchor plate. Steel posts shall be manufactured from wrought, rail, or new billet steel, and shall have a minimum weight of 1.33 lb/linear ft. The anchor plates shall weigh a minimum of 0.67 pounds and be a minimum of 18 sq. inches2in area. The anchor plate shall be attached to the post so the top of the plate is no more than 18 inches from the bottom of the post. The posts shall have rounded knobs located approximately 2 inches apart along the length of the post. The steel fence posts shall conform to ASTM A 702. Furnish with 5 clip type wire fasteners per post. Clips shall have a zinc coating of at least 0.3 oz. per square foot and be designed to fit the steel fence posts. Clips shall conform to ASTM A 702. Furnish clips in packages of 50. 2. 350 rolls of Barbed Wire: A strand of two 12 1/2 ga galvanized wires twisted together with 2 point barbs of 14 ga wire spaced 4 inches apart. Wire and barbs shall be zinc coated steel, with a zinc coating of at least 0.3 oz per square foot of coated surface area. The minimum breaking strength of each wire shall be 950 lb force. The barbed wire shall conform to ASTM A 121. Furnish in 80 rod/1320 ft. rolls. 3. 130 rolls of Barbless Wire: A strand of two 12 1/2 ga, galvanized wires twisted together. Wire shall be zinc coated steel wire of at least 0.3 oz per square foot of coated surface area. The minimum breaking strength of each wire shall be 950 lb force. The barbless wire shall conform to ASTM A 121. Furnish in 80 rod/1320 ft. rolls. 4. 120 bundles of 100 each 30" Wire Fence Stays: Twisted wire fence stays shall be manufactured from smooth galvanized 9 gauge wire. Fence stays shall conform to ASTM A 702. Furnish in bundles of 100. The Contractor shall be responsible for any/all damages occurring in transit. Prospective offers must have a Dunns and Bradstreet number http://www.dnd.com and be registered in CCR prior to award of the RFQ. If your CCR registration is marked incomplete your offer will not be considered. It is your responsibility to register on line at http://www.ccr.gov. The solicitation will be posted electronically at http://ideasec.nbc.gov/ on or about, April 28, 2006, and will close on, May 30, 2006 at 11:59 pm EST. No hard copies will be mailed, all quotes must be received electronically. The only fax or e-mail that will be accepted by fax will be the Past Performance Questionnaire and Section K. This RFQ is estimated not to exceed $100,000.00. For further information call Leona B. Parker at 530-252-5338 or by e-mail: lparker@ca.blm.gov. When calling or by email you must refer to the RFQ Number: BCQ062005. See numbered note 1.
- Web Link
-
Please click here to view more details.
(http://ideasec.nbc.gov/j2ee/announcementdetail.jsp?serverId=LM142201&objId=1078392)
- Place of Performance
- Address: Susanville, CA - Lassen County
- Zip Code: 961300471
- Country: USA
- Zip Code: 961300471
- Record
- SN01028598-W 20060416/060414221055 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |