Loren Data's SAM Daily™

FBO DAILY ISSUE OF APRIL 26, 2006 FBO #1612
MODIFICATION

66 -- Dew Point Hygrometer System

Notice Date

4/24/2006
 

Notice Type

Modification
 

NAICS

339111 — Laboratory Apparatus and Furniture Manufacturing
 

Contracting Office

Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, MD, 20899-1640
 

ZIP Code

20899-1640
 

Solicitation Number

SB1341-06-Q-0316
 

Response Due

5/2/2006
 

Archive Date

5/17/2006
 

Point of Contact

Lynda Roark, Purchasing Agent, Phone 301-975-3725, Fax 301-975-8884, - Carol Wood, Contract Specialist, Phone 301-975-8172, Fax 301-975-8884,
 

E-Mail Address

lynda.roark@nist.gov, carol.wood@nist.gov
 

Description

The above referenced request for quotation is hereby amended: The purpose of this amendment is to extend the due date for quotations as follows: Original Response Date: April 19, 2006 by 2:00pm Amended Due Date: May 02, 2006 by 2:00 pm. All other terms remain the same. DESCRIPTION: THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THIS SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 05-08. The associated North American Industrial Classification System (NAICS) code for this procurement is 339111, with a small business size standard of 500. This acquisition being procured using full and open competition. The National Institute of Standards and Technology (NIST) has a requirement for one (1) Dew Point Hygrometer System. LINE ITEM 0001: Quantity one (1) each Dew Point Hygrometer System meeting all of the following required specifications: 1.) Chilled mirror sensor capable of making dew point temperature measurements with an accuracy equal to or better than plus/minus 0.15 degrees Celsius; 2.) Chilled mirror sensor with a humidity measurement range of 1.5 percent to 100 percent relative humidity; 3.) Chilled mirror sensor with flow-through capability that includes inlet/outlet ports with compression fittings for accepting tubing with an outer diameter not larger than 1/4 inch; 4.) Chilled mirror sensor capable of making dew point temperature measurements over a pressure range from 0 Bars to 2 Bars; 5.) A temperature sensor capable of making temperature measurements with an accuracy equal to or better than plus/minus 0.1 degrees Celsius; 6.) A pressure sensor capable of making barometric pressure measurements with an accuracy equal to or better than plus/minus 10 mbars over the range from 0 Bars to 2 Bars; 7.) Shall include a color VGA display or better; 8.) Shall include an ethernet port digital interface; 9.) Shall include a data logger; 10.) Must have the capability to upload data in ASCII format; 11.) Contractor shall provide documentation that certifies the accuracy of the instruments are NIST traceable for humidity, temperature and pressure measurements; 12.) Capability to display measured dew point, temperature (in degrees Celsius), pressure, and calculated relative humidity (in percent); 13.) Chilled mirror must have self-cleaning capability; 14.) Must include two sampling units; each with a vacuum pump, rotameter and needle valve to sample air from locations removed from the dew point chilled mirror sensor. Each unit must have impolene internal tubing and compression fittings for accepting tubing no larger than 1/4 inch outer diameter; 15.) Must include two filters for sampled air. Each filter must have compression fittings for accepting tubing no larger than 1/4 inch outer diameter; Delivery shall be FOB Destination. FOB Destination means the contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. Delivery shall be completed in accordance with the contractor’s commercial schedule. Award shall be made to the quoter who meets all required technical specifications as determined by a review of documentation submitted in accordance with this solicitation and quotes the lowest price. Evaluation of Technical Capability shall be based on the information provided in the quotation. Quoters shall include the manufacturer, make and model of the product, manufacturer sales literature or other product literature which CLEARLY DOCUMENTS that the offered product meets or exceeds the specifications stated herein. The full text of the FAR provision or clause may be accessed electronically at www.acqnet.gov/far. The following provision applies to this acquisition: FAR 52.212-1, Instructions to Offerors-Commercial Items. The following clauses apply to this acquisition: 52.204-7 Central Contractors Registration 52.212-4 Contract Terms and Conditions-Commercial Items; 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items including subparagraphs: (14)52.222-3, Convict Labor (15)52.222-19, Child Labor-Cooperation with Authorities and Remedies (16)52.222-21, Prohibition of Segregated Facilities (17)52.222-26, Equal Opportunity (19)52.222-36, Affirmative Action for Workers w/Disabilities (23)52.225-1, Buy American Act-Supplies (26)52.225-13, Restrictions on Certain Foreign Purchases (31)52.232-33, Payment by Electronic Fund Transfer-Central Contractor Registration. Department of Commerce Agency-Level Protest Procedures Level above the Contracting Officer is also incorporated. It can be downloaded at www.nist.gov/admin/od/contract/agency.htm. All quoters shall submit the following: 1). An original and one (1) copy of a quotation which addresses Line Item 0001. 2). Two (2) originals of technical description and/or product literature; All quotes must be sent to the National Institute of Standards and Technology, Acquisition Management Division, Attn: Lynda Roark, 100 Bureau Drive, MS 1640, Gaithersburg, MD 20899-1640. Offerors shall ensure the RFQ number is visible on the outermost packaging. Submission must be received by 2:00 p.m. local time on April 19, 2006. E-MAIL QUOTES SHALL BE ACCEPTED. FAX QUOTES SHALL NOT BE ACCEPTED. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (24-APR-2006); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
 

Web Link

Link to FedBizOpps document.
(http://www.fbo.gov/spg/DOC/NIST/AcAsD/SB1341-06-Q-0316/listing.html)
 

Place of Performance

Address: 100 BUREAU DRIVE, MS 1640 GAITHERSBURG, MD

Zip Code: 20899

Country: UNITED STATES
 

Record

SN01034409-F 20060426/060424222035 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |