SOURCES SOUGHT
52 -- Ring Gage Set
- Notice Date
- 5/2/2006
- Notice Type
- Sources Sought
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AFMETCAL, 813 Irving Wick Dr. W., Heath, OH, 43056-6116
- ZIP Code
- 43056-6116
- Solicitation Number
- Reference-Number-07M-248A-DI
- Response Due
- 5/15/2007
- Archive Date
- 5/15/2007
- Description
- This request for information/sources sought announcement is issued to identify potential sources and gather information on current capabilities within the market. The Air Force Metrology and Calibration Program is considering a purchase of a ring gage set. Ring Gage Set shall include 0.10 in. Dia, 0.25 in. Dia, 1.0 in. Dia, 1.75 in. Dia, 3.0 in. Dia, 6.00 in. Dia, 10.00 in. Dia Out of Roundness shall not to exceed 5 icroinches. The cylindricity shall not to exceed 10 microinches. The ring gages shall be constructed of one piece, steel, with witness marks at a location where internal cylinder is perpendicular to bottom of gage. The nominal diameter shall be plus or minus 25 microinches. The ring gage height shall be a minimum of 0.75 inches for smaller diameter gages to 1.5 inches for the larger diameter gages. The estimated quantity is one unit. Surplus or used material is not acceptable for this item. Offerors responding to this sources sought market research must (1) state whether they are a small or large business and indicate if your company is a small disadvantage or woman-owned business, 8(a) firm, or a historically black college or university or minority institution (HBCU/MI), or a historically underutilized business zone (HUBZone) small business; (2) advise what the longest period of time is that you can hold the quoted price; (3) advise if you have the item on a GSA schedule or other Government contract; (4) provide information concerning the technical capabilities of the product you are interested in offering, including commercial literature/brochures; (5) advise if you accept the Government purchase card; (6) any other pertinent information which would enable the government to assess your firm?s capabilities; (7) provide point of contact and assigned Commercial and Government Entity (CAGE) Code; (9) advise how much time you would need to submit a technical proposal once the solicitation is issued; (10) provide an estimated price for one each of the unit you would be offering. This synopsis is for planning purposes only and is NOT to be construed as a commitment by the Government nor will the Government pay for information solicited hereunder. At this time, no solicitation exists. Submit all responses to this notice to the point of contact listed below. All responses should be submitted to Glenna Pound, Contracting Officer, via e-mail at mlk@afmetcal.af.mil or by Fax at 740-788-5157 or mail to 813 Irving-Wick Dr W, Bldg 2, Heath Oh 43056-1199, if e-mail response is not possible. Use reference number 07M-248A-DI in your response. Responses are due by 15 May 06.
- Record
- SN01039084-W 20060504/060502220606 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |