MODIFICATION
J -- J - Immersion Ultrasonic Inspection F108 1-2 Spool and Stg 3 Disk
- Notice Date
- 5/8/2006
- Notice Type
- Modification
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015
- ZIP Code
- 73145-3015
- Solicitation Number
- FD2030-06-87173
- Response Due
- 6/16/2006
- Archive Date
- 12/15/2006
- Point of Contact
- Kenneth Dement, Contract Negotiator, Phone (405)734-8487, Fax (405) 739-3462,
- E-Mail Address
-
kenneth.dement@tinker.af.mil
- Description
- THIS SYNOPSIS IS MODIFIED TO CHANGE THE SOLICITATION RESPONSE DATE FROM 6 JUNE 2006 TO 31 MAY 2006. THE STRUCTURE OF THE CONTRACT IS HEREBY AMENDED TO A ONE-YEAR BASIC AND FOUR (4) ONE YEAR OPTIONS. ESTIMATED QUANTITY FOR THE CONTRACT IS AS FOLLOWS: BASIC YEAR: LINE ITEM 0001: 4 EA; LINE ITEM 0002: 4 EA; LINE ITEM 0003: 4 EA. OPT YEAR I: LINE ITEM 1001: 4 EA; LINE ITEM 1002: 4 EA; LINE ITEM 1003: 4 EA; OPT YEAR II: LINE ITEM 2001: 4 EA; LINE ITEM 2002: 4 EA; LINE ITEM 2003: 4 EA; OPT YEAR II: LINE ITEM 3001: 4 EA; LINE ITEM 3002: 4 EA; LINE ITEM 3003: 4 EA; OPT YEAR III: LINE ITEM 4001: 4 EA; LINE ITEM 4002: 4 EA; LINE ITEM 4003: 4 EA. IMMERSION ULTRASONIC INSPECTION OF F108 HPC 3RD STAGE DISK AND F108 1-2 SPOOL. Basic 3 year contract with 2 option years ? Best Estimated Quantity commercial contract is contemplated. This contract is subject to Service Contract Act. Item 0001: Inspection of F108 1-2 Spool. Input/Output NSN 2840-01-147-0535PN, P/N: 9992M60G06/G07. QTY: 5 EA Item 0002: Inspection of F108 HPC 3rd Stage Disk. Input/Output NSN 2840-01-187-3182PN, P/N: 1590M59P01/P13/P18. QTY: 6 EA. Applicable to: F108 engines, KC-135R/T aircraft. Destn: Tinker Air Force Base OK 73145-3032. Delivery: Item 0001: 9 each 10 days ARO and receipt of repairable assets. Item 0002: 6 each 10 days ARO and receipt of repairable assets. Item Description: The F108 1-2 Spool retains Stage 1 & 2 blades in axiel slots. Size: length is 6.287 inches nominal/ diameter is 17.197 inches minimum, 17.201 inches maximum. Material is Titanium Alloy Forging. Description: The F108 HPC Stage 3 Disk retains Stage 3 blades in axiel slots. Size: width is 1.180 inches minimum and 1.190 inches maximum, thickness is 1.500 inches nominal, diameter is 17.000 inches nominal. Material is Titanium Alloy Forging. For additional information contact Ken Dement (405) 739-3584. Qualification requirements: Sources must be qualified by CFMI prior to being considered for award. These qualification requirements apply to line item(s) 0001 and 0002. The approximate solicitation issue date is 15 MAY 2006 and the estimated solicitation response date will be 16 JUNE 2006. Electronic procedures will be used for this solicitation through FedBizOps at http://www.eps.gov/. Approved Sources are GEES Cincinnati, OH 45215; MQS Inspection Cincinnati, OH 45215; XRI Testing Cincinnati, OH 45215; Kachina Testing Laboratory Phoenix, AZ 85034; Snecma Services, France; Ryder Caledonian, Scotland; Chromalloy Holland, Netherlands; Lufthansa German Airlines, Germany; GEES Wales, UK; GEAE Singapore; Varig Airlines, Brazil; United Airlines San Francisco, CA; Ishikawajima-Harima Heavy Industries, Tokyo, Japan, and; Chromalloy San Diego, El Cajon, CA, USA. All responsible sources solicited may submit a bid, proposal, or quotation that shall be considered. Please contact: OC-ALC/BC, ATTN: Source Development Office, 3001 Staff Dr Ste 1AG85A, Tinker AFB OK 73145-3009 in writing for further information concerning the source approval process. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Request for Written Proposal will be posted to FedBizOps. See Note (s) 23.
- Place of Performance
- Address: CONTRACTOR'S FACILITY
- Record
- SN01043879-W 20060510/060508220708 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |