Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF MAY 19, 2006 FBO #1635
SOLICITATION NOTICE

30 -- High Power Amplifier for the Electronic Proving Ground (EPG), Fort Huachuca, Arizona 85613-7063

Notice Date
5/17/2006
 
Notice Type
Solicitation Notice
 
NAICS
334220 — Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing
 
Contracting Office
ACA, White Sands Missile Range, Directorate of Contracting, Bldg 143, 2nd Floor, Crozier Street, White Sands Missile Range, NM 88002-5201
 
ZIP Code
88002-5201
 
Solicitation Number
W9124Q-06-R-EPGPAD
 
Response Due
5/24/2006
 
Archive Date
7/23/2006
 
Small Business Set-Aside
Total Small Business
 
Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The Electronic Proving Ground, Fort Huachuca, Arizona is soliciting proposals for the following requirement: 1 each, Amplifier Research, 80 MHz to 1000 MHz High Power Amplifier to include the following requirements: a Power Amplifier system that is rated to 3600 to 4000 watts (minimum) with a minimum frequency coverage of 80 MHz to 1000 MHz (it is okay to exceed these frequency either up or down). It is also recognized that current fundi ng is inadequate to accomplish the purchase of the 4000 watt amplifier. Therefore, the attempt is to purchase a modular system that can be purchased in increments and configured to ultimately get to the desired 4000 watts; Technical requirements: 1000 wa tts  First Step; The 1000 watt RF High Power Amplifier (HPA) will be a self-contained, air-cooled, broadband, completely solid-state amplifier to develop fields in both anechoic chamber and in an open field test site this 1000 watt HPA will be housed in a single equipment rack and will provide a complete stand-alone performance for testing; HPA will be of a design that provides low distortion and is stable across the frequency range. Input signals will be from signal generators that are both swept and ste pped through the frequency band; Amplifier will be able to be controlled either locally or by remote; The amplifier display will provide extensive control and status reporting capability; The digital display will provide operational presentation of Forwa rd Power and Reflected Power plus control status and reports of internal amplifier status; Also features will include a gain control, internal/external automatic level control (ALC) with front panel control of the ALC threshold, pulse input capability and RF output level protection; HPA will provide a RF detector that provides an output for use in self-testing or operational modes; All HPA control functions and status indications are available remotely in GPIB / IEEE-488 format and RS-232 hardware, and fib er optic; There will be a key lock on the front panel of the HPA; The HPA will be configured such that the system can be added to in an incremental fashion to become a part of the higher power unit; The HPA must operate as a stand alone amplifier or in t andem with other HPAs and a controller/combiner to generate the ultimate goal of 3600 to 4000 watts minimum; Supplier must provide production data that will address the expansion of the system to demonstrate 3600W capability when using additional HPAs; Supplier must provide production data on previous shipments of HPA to demonstrate 1000W capability and discussion of what is required for using and ordering; REQUIRED SPECIFICATIONS: Minimum 3 year warranty; Minimum RATED OUTPUT POWER - 1000 watts; INPUT FOR RATED OUTPUT - 1.0 milliwatt maximum; POWER OUTPUT at 3 dB compression, Nominal 1150 watts, Minimum 850 watts; FLATNESS .? 2.0 dB ? 0.8 dB with internal leveling; Minimum FREQUENCY RESPONSE 80 - 1000 MHz instantaneously; MinimumGAIN 60 dB minimum; Gain Adjustment: INPUT IMPEDANCE 50 ohms, VSWR 2.0:1 maximum; OUTPUT IMPEDANCE 50 ohms, VSWR 2.0:1 typical maximum; MODULATION CAPABILITY AM, FM, or Pulse mod ulation; HARMONIC DISTORTION: Minus 20 dBc maximum at 800 watts; RF POWER METER 0 - 1200 watts full scale; PRIMARY POWER 200 - 240 VAC, Delta Connected (4 wire) 50/60 Hz, 3 phase 12kVA Maximum; CONNECTORS: RF Input - Type N female front panel; RF Outpu t - Type 7/16 female rear panel; External Leveling Inputs - Type BNC female on front panel; Pulse Modulation Input - Type BNC female on front panel; Detected RF Output - Type BNC female on front panel; Remote Computer Interface - 24 Pin female IEEE-48 8 (GPIB) and RS-232 connector on rear panel; Remote Computer Interface (fiber optic) - ST Conn Tx and Rx RS-232; COOLING - Forced air (self contained fans- continuous operation for minimum of 16 hours). FOB Destination (Fort Huachuca, Arizona 85613). Pa yment will be made by Government Credit Card under Net 30 Terms. Offers are due no later than 1200 hours, Wednesday, 24 May 2006 and shall be submitted electronically at virginia.miller@epg.army.mil. EVALUATION CRITERIA / PROCEDURES: Offers will be evalua ted based on the following best value criteria in descending order of importance: Meeting the Requirement, Proposed Delivery Schedule, Past Performance and Price. Award as Commercial firm fixed priced contract/purchase order. For additional information , contact Virginia J. Miller, Contracting Officer, at (520) 538-3978 or virginia.miller@epg.army.mil. The Synopsis/ solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2001-22 and 2001-23. This is a Small Business Set Aside. The NAICs is 334220. The following FAR provisions apply to this acquisition: 52.212-1, Instruction to Offerors Commercial items, and 52.212-2, Evaluation of Commercial Items, applies to the acquisition. Offerors s hall include a completed copy of FAR provision 52.212-3, Offeror Representations and Certifications Commercial Items, and furnish Offeror's Federal Tax Identification Number, Cage Code, Central Contractor Registration Number, DUNS Number and applicable FSC Codes with this offer. FAR Clauses 52.212-4, Contract Terms and Conditions Commercial Items and 52.212-5, Contract Terms and Conditions Required Implementing Statutes or Executive Orders Commercial Items apply to this acquisition. FAR 52.219-8, U tilization of Small Business Concerns. The government reserves the right to select for award, all, some, or none of the proposals received in response to this announcement.
 
Place of Performance
Address: ACA, Southern Region, Electronic Proving Ground (EPG) Banister Hall, SFCA-SR-WS, 2000 Arizona Street Fort Huachuca AZ
Zip Code: 85613-7063
Country: US
 
Record
SN01049995-W 20060519/060517221656 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.