SOLICITATION NOTICE
28 -- No NOUN on LISTK database
- Notice Date
- 5/19/2006
- Notice Type
- Solicitation Notice
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; 3001 STAFF DR STE 2AG1 109B; TINKER AFB; OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- FA8104-06-R-0461
- Response Due
- 7/3/2006
- Archive Date
- 10/1/2006
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD2030-06-70283 SOl #: FA810406R0461 Item: 0001 NSN: 2840013528066PNPN GEARBOX,ACCESSORY D P/N: 9995M18G06, Description: IGB is located in the fan frame sump & is bolted to the forward side of the fan frame aft flange. It contains a horizontal (47 teeth) bevel gear, & a radial (35 teeth) bevel gear, along with the core engine thrust (No. 3 ball) bearing. The radial bevel gear is supported by two roller bearings. The assembly also houses two oil nozzles which lubricate the bearing areas. FUNCTION: Inlet gearbox assembly is to serve as a mechanical coupling between the high pressure compressor & the transfer gearbox assembly. It also provides support for the forward end of the high pressure compressor shaft. DIMENSIONS: Approximately 1 1/2 " width by 2' high. It weighs approximately 35 lbs. MATERIAL: stainless (17-4PH steel, horizontal & radial bevel gears - 9310 steel and the No. 3 bearing - M50 - Nil material.. Total Line Item Qty: 4.0000 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 31OCT2007, 4.00 PR Number(s): FD2030-06-70283 SOL #: FA810406R0461 Item: 0002 NSN: 2840013528066PNPN GEARBOX,ACCESSORY D P/N: 9995M18G06, Description: IGB is located in the fan frame sump & is bolted to the forward side of the fan frame aft flange. It contains a horizontal (47 teeth) bevel gear, & a radial (35 teeth) bevel gear, along with the core engine thrust (No. 3 ball) bearing. The radial bevel gear is supported by two roller bearings. The assembly also houses two oil nozzles which lubricate the bearing areas. FUNCTION: Inlet gearbox assembly is to serve as a mechanical coupling between the high pressure compressor & the transfer gearbox assembly. It also provides support for the forward end of the high pressure compressor shaft. DIMENSIONS: Approximately 1 1/2 " width by 2' high. It weighs approximately 35 lbs. MATERIAL: stainless (17-4PH steel, horizontal & radial bevel gears - 9310 steel and the No. 3 bearing - M50 - Nil material.. Total Line Item Qty: 4.0000 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 31OCT2007, 4.00 Electronic procedure will be used for this solicitation. To: GENERAL ELECTRIC COMPANY, CINCINNATI, OH.,45215-1915. To: GENERAL ELECTRIC COMPANY, CINCINNATI, OH.,45215-1915. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Request for Written Quotation will be issued. The anticipated award date will be 60 days after the issuance of this notice. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty five-days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government.
- Record
- SN01053845-W 20060521/060519220742 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |