SPECIAL NOTICE
20 -- Rudders
- Notice Date
- 5/24/2006
- Notice Type
- Special Notice
- NAICS
- 332710
— Machine Shops
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer, USCG Engineering Logistics Center, 2401 Hawkins Point Road Building 31, Mail Stop 26, Baltimore, MD, 21226-5000
- ZIP Code
- 21226-5000
- Solicitation Number
- Reference-Number-HSCG40-06-RUDDERS
- Response Due
- 6/7/2006
- Archive Date
- 6/22/2006
- Description
- MARKET RESEARCH QUESTIONNAIRE Title: 110 WPB CLASS CUTTERS; REPLACEMENT RUDDERS Revision Date: 5/24/2006 Originated by: Todd M. Hiller Date: 5/17/2006 Originated by: Engineering Logistics Center Department: Boat Engineering Branch (024) 110 WPB RUDDERS 1. PURPOSE IF CONTACT The Coast Guard is conducting market research in effort to identify vendors who can provide commercially available polyether polyurethane rudders. 2. SYNOPSIS The Coast Guard is considering replacement of the existing steel rudders with a polyether polyurethane type foil to reduce further maintenance and enhance durability of the 110 WPB Island Class Cutters. 3. OUTLINE REQUIREMENTS Vessel Characteristics: Loa = 104.3 ft. T = 7.3 ft. Boa = 21.1 ft. ?? = 163.4 LT V = ~ 30 knots A = 11.55 ft2 Rudder Stock Properties: Rudder shaft material shall be Aquamet 22 HS, Aqualoy 22 High Strength or equivalent high strength, non-magnetic stainless steel boat shaft. Minimum physical properties are provided below. 5803 tungsten carbide thermal spray weld shall be applied on the stock throughout the bearing and seal areas, starting at the 1?? radius where the stock meets the fin blade. Density at 75oF 0.285 lbs/in3 Modulus of Elasticity (Tension) 28,900,000 lbs/in2 Modulus of Elasticity (Torsion) 10,800,000 lbs/in2 Poisson??s Ratio 0.312 Ultimate Tensile Strength 130,000 lbs/in2 0.2% Yield Strength (Tension) 105,000 lbs/in2 0.2% Yield Strength (Torsion) 70,000 lbs/in2 Elongation, % in 2? 15 Reduction of Area, % 45 Impact Charpy V-Notch 100 ft-lbs Estimated Rudder Forces & Torque (ABS Rules for High Speed Craft); 2001: CR = nCSKTAV2 kN (tf, Ltf) CR = 200.75 Ltf ?V Ahead CR = 50.82 Ltf ?V Astern A = 11.6 ft2 ?V Rudder Blade Area Vd = 30.0 kts Va = 15.0 Kts ?V maximum astern speed Vmin = 16.7 Kts - (Vd+20)/3 kT = 1.463 Ahead kT = 1.200 Astern Af = 1.1 ft2 ?V Rudder Blade Area forward of rudder stock n = 0.0132 CS = 1.000 Rudder Torque for Scantlings QR = CRr kN-m (tf-m, Ltf-ft) QR = 94.55 Ltf-ft - Ahead QR = 57.94 Ltf-ft - Astern Elastomeric Fairing (Rudder Foil): The non-pigmented elastomeric fairing shall be cast over the welded core/shaft assembly (316L stainless steel), be thermo-setting castable polyether polyurethane to a minimum Durometer 80 A hardness when cured to ASTM D2240-03 standards and subject to sea water temps from 85o to 28o F. Rudder Profile: Rudder Isometric: 4. QUESTIONS 1. What type of products and services do you offer that might fill these requirements? Please send literature with a full description. 2. Are these products current production units? 3. Do you offer these products commercially? 4. If you do not offer a commercial product that already meets these requirements, do you offer a commercial product that could be modified to meet these requirements? 5. Do you expect to offer a new product or service some time in the future that might affect the product you are offering for this requirement? 6. What kind of standard testing is performed on your product? Please provide a copy of the standard testing or please explain in detail the type of testing performed? 7. Do you provide standard training of the equipment 8. What type of manufacturing or services quality control do you provide? Please provide a copy of the quality control if available. If not available, please explain in detail your standard practices for quality control. 9. Where is your manufacturing plant located? 10. What is the lead time for manufacturing and delivering these products? 11. What are your standard warranty terms? Does the warranty period start upon delivery of unit or upon installation of unit? Please provide a copy of the warranty terms. 12. Do you have a commercial catalog for a related group of products or services? If so, please provide a copy or a web address. 13. Knowing that the rudders will set directly behind the propellers and be exposed to cavitations, what hardness do you recommend for the polyether polyurethane material? What material do you recommend that will hold up for this type of application? 14. The CG is currently using an anti-cavitations coating on the rudders due to the prop wash, will a coating be required on top of the polyether polyurethane material to present it from erosion? Will the PPM erode? 15. Is your company a small business manufacturer or dealer or large business manufacturer or dealer? 16. Are you a minority business? If so, what kind? Manufacturers may submit any and all information, literature and documentation that they feel may be beneficial. This notice is issued for the purpose of market research. The Coast Guard does not intend to award a contract on the basis of this market research or otherwise pay for information received in response to this notice. Any response and documentation received will be treated as information only and it shall not be used as a proposal. Questions pertaining to any future solicitation will not be answered at this time. If you are unable to print out the Rudder Profile and Rudder Isometric, Please e-mail your request for the documents to Sharon Jackson at Sharon.J.Jackson@uscg.mil.
- Record
- SN01056176-W 20060526/060524220420 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |