Loren Data's SAM Daily™

FBO DAILY ISSUE OF JUNE 23, 2006 FBO #1670
SOLICITATION NOTICE

66 -- Notice of Intent

Notice Date

6/21/2006
 

Notice Type

Solicitation Notice
 

Contracting Office

BUREAU OF RECLAMATION PO BOX 25007, D-7810 DENVER CO 80225
 

ZIP Code

80225
 

Solicitation Number

06SQ810259
 

Response Due

6/26/2006
 

Archive Date

6/21/2007
 

Small Business Set-Aside

N/A
 

Description

The Bureau of Reclamation intends to award to Intralox, Inc. a requirement for a Vertical Traveling Fish Screen that meets the specifications below and NOAA andromous fish screening criteria. Reclamation has identified Intralox, Inc. as the only source technically capable of meeting Reclamation's requirements based on their engineered polymer screens. This procurement is being conducted under the Simplified Acquisition Procedures (SAP). The Government believes that only one responsible source can provide the item that will satisfy the agency's requirements and a Sole Source Determination has been prepared to support of this accquisition. However, firms believing they can meet the stated requirements are encouraged to submit supporting evidence to that effect in sufficient detail to demonstrate the respondent's ability to meet the stated requirements. A determination by the Government not to compete this proposed action based on responses to this notice is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. Interested sources must submit demonstrative supporting evidence by fax, or e-mail to the address listed below no later than 5 calendar days from the date of this announcement. Responses must include Drawings of proposed screens and any other maaterial in sufficient detail to demonstrate the respondent's ability to meet the requirements stated in this announcement and also must state whether the offered item meets NOAA Criteria for andromous fish screening. Further, responses should include the firm's Dun and Bradstreet number (DUNS) and Tax Identification Number (TIN). Finally, firms should identify themselves as ether a small business, or other than small business, in accordance with the size standard for North American Industrial Classification System (NAICS) Code 333922 which is 500 employees. This is a Notice of Intent only, and not a Request for Quotations or an announcecment of a solicitation. The Government will not pay for any materials furnished in response to this synopsis. Submittals furnished will not be returned to the sender. Send all responses to the attention of John Collins: jcollins@do.usbr.gov or Fax at 303/445-6345. The screens shall slide into rectangular guides. The guides consist of 2.5" deep by 7.4" wide vertical channels on each side connected by a 7" high weir plate across the frontal base. The weir plate prevents flow through the lower 7" of the screen structure allowing room for the screen to roll. The screens shall provide a minimum flat flow-through-area of 8 ft2 based on gross screen area. The flat screen area shall have a minimum height of 38 inches measured from the top of the front weir plate and a minimum width of 32 inches. Each screen shall be a self contained unit. The units shall have a coated steel frame. The screen material shall be constructed of engineered Acetal polymer material or similar with slotted openings not to exceed 1.75mm wide by 20mm long. The screen material shall have between 32 and 42 percent open area. The water side of the screen shall be smooth to protect fish. All screen drive components and bearings shall be constructed of stainless steel or Acetal polymer to prevent corrosion. The screen shall be designed to withstand a two foot water differential between the front and back sides of the screen. All components and coating of the screen units shall meet requirements for potable water. The screens shall travel vertically up the front (water side) and down the back (discharge side). The screen material shall have front seals on each side and the bottom to prevent fish passage. No gaps between the seals and the screen material shall exceed 1.75 mm during the complete rotation of the screen. The screens shall have drive motors secured to the screen frames and mounted at a height above the screen guides. The screens shall be powered by a variable speed motor capable of delivering a linear screen speed from 0.5 ft/min to 2 ft/min. The screens shall be designed to mount adjacent to each other in the guides.
 

Web Link

Please click here to view more details.
(http://ideasec.nbc.gov/j2ee/announcementdetail.jsp?serverId=BR142581&objId=108503)
 

Place of Performance

Address: Denver CO

Zip Code: 802250508

Country: USA
 

Record

SN01074845-W 20060623/060621221204 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |