Loren Data's SAM Daily™

FBO DAILY ISSUE OF JUNE 29, 2006 FBO #1676
SOLICITATION NOTICE

99 -- Safety & Emergency Equipment

Notice Date

6/27/2006
 

Notice Type

Solicitation Notice
 

Contracting Office

Narcotics Affairs Section, Apo Aa, AA 34002
 

ZIP Code

34002
 

Solicitation Number

O627
 

Response Due

7/3/2006
 

Archive Date

7/23/2006
 

Small Business Set-Aside

N/A
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number is O627 and is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular . The associated North American Industrial Classification System (NAICS) code for this procurement is with a small business size standard of 0 employees. This requirement is unrestricted and only interested offerors may submit a quote. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on Monday, July 3, 2006 at 14:00:00 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Miami, FL 33178 The Department of State requires the following items, EXACT MATCH ONLY, to the following: LI 001, Fuel Transfer Pump, 12 volt, 20GPM, 2, EA; LI 002, Rebuild kit for electric transfer pumps. Includes components for seal assembly, 5 bronze vanes and rotor key for rotor, rotor cover, gaskets, bolts, bypass gasket spring and valve, inlet gasket and screen, plus instructions., 2, KT; LI 003, Oil dri Oil only pads, 16in W x 20in L, polypropylene pads to float on water, ideal for absorbing petroleum fluids, can be used on land or water. 100 to a box, 1, BX; LI 004, Impeller Water Pump, 7200 GPH, 9 HP, 1.5in with electric satrt and recoil backup. Economical, compact, portable. Hi-pressure 2-stage twin impeller hig efficiency pump. Marine-grade aluminum casing 3-way discharge port. Nitrile rubber seal and casing 'O'rings, self priming up to 19ft, corrosion-resistant materials, low oil protection, 4, EA; LI 005, Water Pump PVC Suction Hose, 1-1/2in x 20 feet, includes male and female industrial pipe thread coupling, 4, EA; LI 006, Leakproof Brass Foot Valve, 1-1/2in, constructed of corrosion-resistant brass. Leakproof to maintain constant priming. Screen around foot keeps out foreign object, 4, EA; LI 007, Tank Hose 20ft, to be used with low pressure dispensing pumps, barrel pumps or gravity storage tanks, For gasoline and oils, furnished with male cast brass fittings, 2, EA; LI 008, Fuel Filter, 1in fittings, water absorbing polymers trap water and particles as small as 15 microns. Weather and shock resistant filters handle pressure up to 150 PSI. 4in dia. x 9-1/2in H filter fits standard 1in threaded fittings, die cast zinc top with see-thru base. Sediment drainage valve., 2, EA; LI 009, Replacement Fuel FIlter Element, 15 micron element, includes 'O'ring, 9-1/2in H x 4in diameter, fits models 17041 & 170306, 20, EA; LI 010, High Volume Auto Nozzle, 1in NPT inlet, 7/8in outlet, high flow up to 22 GPM. All metal hand guard adn lever for rugged use and long life.Three-speed latch, automatic shutoff. Built-in check valve. Leaded, diesel or kerosene. For 110V and 12V pumps, 4, EA; LI 011, Swivel connection 1in, for item 109561, use with hose and nozzle to allow more freedom of movement, 4, EA; LI 012, Mechanical Fuel Meter, 1in, 4 wheel has a flow rate of 6-40 GPM, resettable master totalizer registers up to 9,999,999.9 gallons, 1in inlet/outlet ports, compatable with diesel fuel, gasolines, kerosene, mineral spirts stoddard solvent and heptane., 2, EA; LI 013, Oil Lube System - Pump-Reel-Meter, convenient package includes a 5:1 double-acting oil air-operated lube pump (#109067) that delivers an amazing 312 GPH, pump has 1-4in air inlet, 1/2in. oil outlet and a 2in. NPT bung adapter. Requires a 1in. NPT pipe and a 1in. suction hose and transfers any type of oil. System also includes a digital oil meter with an oil control valve (#109063). Digital gear meter has easy-to-read 4-digit display. Meter operates on two alkaline batteries included. 1/2in. NPT oil control valve has flow rate up to 26 qts. per minute, 1000 PSI working pressure and a rigid spout. System comes complete with 1/2in x 25ft. hose and reel with ball stop., 2, EA; LI 014, Poly Telescoping Ramp, stronger and lighter than steel, space age polycarbonate ramp is rust-free. Impervious to gas, oil and extreme temps. Each holds 750 pounds. Telescopes from 96in. to 64in. for easy storage and usage, Non-slip surface. Sold as a single., 2, EA; LI 015, Booster Cable System, connector installs on live battery, calmps go on boost-receiving battery and then connections mate, 30 foot heavy-duty, all-weather 4 gauge cables have silver-plated copper contacts on one end and 500 Amp, shockproof clamp handles on the other. With dust cover and mounting hardware, booster cable system is ideal for service or fleet vehicles., 4, EA; LI 016, Creeper with brake, unique lock system uses a one-handed easy-pull lever that restricts the 4 wheels from moving. Excellent when applying pressure to tight fastener or oil filters, no assembly required., 2, EA; LI 017, Crawler Monster (rolling seat), seat has 5in. high performance solid rubber swivel casters with axle bearings that take you anywhere, over any surface. Low back cushioned seat offers extended comfort. Easy lever action raises and lowers seat up to 5in. rise. Floor to seat is 20-3/4in. in lowest position. 19in. dia. tray holds tools and parts, 350 lb. capacity seat works great around gravel, cords, hoses, etc. Some assembly required., 2, EA; LI 018, 50 gallon Industrial-Grade Electric Parts Washer, made of heavy duty 16-gauge steel with a 110 Volt/60 Hz pump. Clean at 220 GPH (with flexible pipe). Features a fusible link for fire safety. Includes a convenient work light, lighted on/off switch, flexible spout and flow-through brush., 2, EA; LI 019, Washer/Degreaser - 5 gallon, cleaner is biodegradable, non-toxic, non-flammable, non-corrosive and has no irritating fumes. Corrosion inhibitor helps prevent metal from flash rust, makes up to 25 gallons depending on the application, 10, EA; LI 020, Parts cleaning brush, 11-1/2in., 4, EA; LI 021, Round LED Trailer Light Kit, 2-1/2in., safer, brighter and longer lasting than standard trailer lights, sealed design to lock out moisture, operates from 8 to 16V and accept industry standard 2-prong plug., 6, EA; LI 022, 7/8 HP Piston Paint Sprayer airless, double-acting piston, features a rugged cart for big-job mobility - with removable handle for convenient transport and storage. Operates at up to 3000 PSI, with a flow rate of .42 gallons per minute. Includes .017in. tip, 50ft of hose and a GX-08 sprya gun, 1, EA; LI 023, Coveralls, XLarge, provides a protective barrier ordinary disposable coveralls can't match. Tyvek filters particles down to .12 microns, elastic around hood, wrists and ankles. Oversize XL fits a person 5 ft.5in. to 6 ft 1in. tall and up to 225 lbs. Full lenght nylon zipper, 20, EA; LI 024, Particulate Respirator with cool flow wxhalation valve 10-Pk, N95 rated meaning the mask screens out 95% of particles downs to about 0.3 micron size, uses electret media to provide worker protection against solid and non-oil based particles. Patented one-way valve for easy exhalation and cool, dry comfort. M-noseclip, no natural rubber latex components, 10, EA; LI 025, Hose Connector, connect 2 or more 1/4 in. hoses, use 1 connector for 2 hoses, 2 connectors for 3 hoses, etc., 2, EA; LI 026, Extension hose 50ft. x 1/4in., tough abrasion-resistant polyurethane cover and seamless thermoplastic innertube. Suitable for common architectural paints and solvents., 1, EA; LI 027, 2-Packs Spray Filters Corase/Green, to be used with GX-06, GX-07, GX-08 and GX-10, 2 filters per pack, filter frames are color-coded by grade, 1, EA; LI 028, 2-Packs of Spray Filters Medium/White, 1, EA; LI 029, 2-Packs of Spray Filters Fine/Yellow, 1, EA; LI 030, .015in. Reversible Spray Tip, allow the user to dislodge any blockage that occurs near the spray tip without having to disconnect hoses and re-prime the sprayer., 1, EA; LI 031, .017in. Reversible Spray Tip, 2, EA; LI 032, Earplugs, soft foam, custom fit, 200 per box, 10, BX; LI 033, Safety Hard Hat with Ratchet Adjustment, white, 4 point nylon quick-snap, lightweight, durable, high density polyehtylene, accessory slots accept hearing protectors, screens and chin strap attachmente. Meets ANSI Z89.1-1997, Type 1, Class C, G and E., 10, EA; LI 034, Air Impact Wrench, 1in. drive, 12 CFM, 6800 RPM, 950 BPM, delivers 120 - 1200ft. - lbs. of working torque. D-handle offers control and comfort in use. Titanium hammercase is lightweight and durable, includes 6 in. anvil, 1, EA; LI 035, Impact Socket Set, 9 piece, 1in. drive, SAE, forged of black chrome molybdenum steel to handle big equipment servicing, 1, EA; LI 036, 9-Piece Metric Impact Socket Set, 1in. drive, from tough, chrome-moly steel construction to the laser-etched, easy-t-read socket size, packaged in a sturdy case, 1, EA; LI 037, 0-Piece truck SAE Impact socket set, 1in drive, 1, EA; LI 038, Connector with built-in check valves, regulator to hose, for fast, reliable, safe and easy connection and disconnection of hoses, torches and regulations in welding, cutting or brazing applications. Easy click-in and click-out design eliminates hand threading and ensures pressures-tight connections in seconds. Made of high-grade materials for precise fitting for every connection. sold in pairs, 5, PR; LI 039, Connectors with built-in check valves, hose to hose, sold in pairs, 5, PR; LI 040, Torch Cart, heavy duty, rolls easily over rough terrain on 20in. pneumatic tires. 28in. W x 46in. H cart features a self-leveling tool box for safe transportation of toch supplies. Made of 14-gauge steel, 10in. x 20in. base holds tanks up to 18-1/2in. diameter. Two chains secure tanks. Solid mount axle for balanced load and superior maneuverability, 3, EA; LI 041, Toughguard Blanket, 6ft x 8tf, made from 18oz. heat-cleaned fiberglass. Take temperatures to 1,000o.F, protect against light to mopderate sparks and splash when used on an incline. Grommeted on 12in. centers on all four sides. Color is tan, 3, EA; LI 042, Leather Welding Jacket for maximum protection, Large, 2, EA; LI 043, Leather Welding Jacket for maximum protection, Medium, 2, EA; LI 044, Welding/Work gloves set, includes one pair of heavy duty leather welding gloves and a pair of leather work gloves, Large, 5, PK; LI 045, Auto Darkening Welding Helmet, gloss black with blue flames, stylish graphics combines with lightweight, polyamide nylon materials, the auto-on, auto-darkening lens switches from 9-12 shade in 1/12,000 of a second. An internal control knob adjusts variable welding shades. Meets ANSI 287.1 2003 standards; shade meets CSA and CE Standards, 1, EA; LI 046, Auto Darkening Welding Helmet, black with silver and red graphics, meets ANSI 287.1 2003 standards; shade meets CSA and CE Standards, 1, EA; LI 047, Auto Darkening variable shade welding helmet, black frame, internally located controls and low battery indicator, operates on replaceable AAA battery (included), 1, EA; LI 048, Auto Darkening Professional Welding Helmet, protect your eyes and reduce neck strain, meets ANSI 287.1 safety standards; lenses meet CSA and CE standards, solar powered, battery-assist lenses. Helmet includes extra lens covers. Operates on replaceable lithium battery (included), 1, EA; LI 049, Flip Front Welding Helmet, budget priced, has flip front and ratchet-action head gear to adjust head sie. 2in x 4-1/4in. viewing area with #10 shade filter, 6, EA; LI 050, Gas Powered hot water pressure Washer, 3000 PSI, 4 GPM, features dependable unloader pressure switch and adjustable temperature. Sprays hot water up to 200o.F, comes with 120 volt burner, brass manifold, ceramic plungers, and huge 14in. go-kart tires. 3ft. dual lance, 5 quick couple nozzles and 50ft yellow, non-marking hose, features a cast iron sleeve, low compression start, and low oil shutdown., 1, EA; For this solicitation, Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. Department of State is taking this action in a an effort to improve vendor access and awareness of requests while expediting its ability to gather multiple, completed, real-time offers. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their offer using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make an offer on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith offers, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, contact Cynthia Alvarado at alvaradocm@state.gov or FedBid.com at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. Delivery shall be made within 30 days or less after receipt of order (ARO). CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Buyers and Sellers understand that FedBid ranks all bids by price, regardless of the evaluation criteria used by the Buyer; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate the offer. Please note that any such evaluation criteria must be articulated in the solicitation to the extent required by such regulations and/or guidelines.
 

Web Link

www.fedbid.com (a-28631, n-2669)
(http://www.fedbid.com)
 

Place of Performance

Address: Miami, FL 33178

Zip Code: 33178

Country: US
 

Record

SN01078259-W 20060629/060627220521 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |