SOLICITATION NOTICE
16 -- T62T APU Tools for the AH-1Y and AH-1W aircraft
- Notice Date
- 7/25/2006
- Notice Type
- Solicitation Notice
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- Department of the Navy, Naval Air Systems Command, Naval Air Warfare Center Aircraft Division Lakehurst, Contracts Department Hwy. 547 Attn:B562-3C, Lakehurst, NJ, 08733-5083
- ZIP Code
- 08733-5083
- Solicitation Number
- Reference-Number-N68335-LAK-000075
- Response Due
- 8/9/2006
- Archive Date
- 8/24/2006
- Description
- The Naval Air Warfare Center Aircraft Division Lakehurst, NJ (NAWCADLKE) intends to enter into sole source negotiations with Hamilton Sundstrand Corporation, CT for the T62T APU Tools that are required to ensure compliance to services of the Sundstrand Auxiliary Power Unit on the AH-1Y and AH-1W aircraft. The T62T APU Tools include the following part numbers and quantities: P/N ST91262-300,Assy Tool, Spark Plug Gromett qty(2); P/N ST61189, Gage, Inspection Bridge, qty(2); P/N ST61195, Gage, Inspection Bridge, qty(2); P/N ST91125, Puller, Combustion Housing Assy, qty(2); P/N ST91017, Puller, Seal,qty(2); P/N ST70396, Gearbox & Turbine Assy Support Fix,qty(2); P/N ST61188-03, Gage, Ring,qty(2); P/N ST70170, Puller, qty(3); P/N ST70230, Wrench, qty(2); P/N ST70106-39, Weld Assy, Eng Support Pin, qty(10); P/N ST901139, Driver, qty(2); P/N ST70109, Puller, Bearing, qty(2); P/N ST70107, Puller, Bearing; qty(2); P/N ST90133, Driver, qty (2); P/N ST90361, Driver, qty(2); P/N ST70137, Rotor Fixture, qty(2); P/N ST70110, Tool, Bearing Insert, qty(2); P/N ST91699, Oil Pump Puller, qty(2); P/N ST70282, Output Shaft Ball Bearing Driver, qty(2); P/N ST91644, Tool, Retaining Ring Check, qty(2); P/N ST70468, Tool, Aligning, qty(2); P/N ST60880, Gage Set, Wire, qty(2); P/N ST70461, Spacer, Ring, qty(2); P/N ST93013, Fixture, Support, qty(2); P/N ST93058, Puller Gear, qty(2); P/N ST93946, Guide, Bearing, qty(2); P/N ST-93014, Adapter Puller, qty(2); P/N ST93228, Output Shaft FWD Pad Seal Guide, qty(4); P/N ST70942, Pinion Puller, Turbine Assy Input, qty(2); P/N ST71248, Alignment Pin, Reduction Drive Assy, qty(2); P/N ST90675, Driver, Gear Support Shaft, qty(2); P/N ST94416, Check Tool, Bleed Duct, qty (2); P/N ST71232, Containment Ring Dry Ice, qty(2); P/N ST71240, Bearing Installation Tool, Output Shaft, qty(2); P/N ST90889-03, Accessory Drive Assy Seal Guide, qty(4); P/N ST90889-06, Seal Guide Tool, Accy Dr Mounting, qty(4); P/N ST70394, Holding Fixture, Reduct Drive Housing, qty(2); P/N ST70414-05, Bearing Driver, Idler Gear Ball, qty(2); P/N ST70414-08, Bearing Driver, Accy Drive Shaft, qty(2); The Government does not own drawings, designs, proprietary rights or the necessary configuration data for the T62T APU Tools. NAWCADLKE intends to procure these items under the authority of 10 USC 2304 (C) (1), as implemented in FAR 6.302-1. No solicitation package is available for this procurement. All responsible sources are encouraged to submit a proposal, which may be used by the Government in determining whether or not to conduct a competitive procurement. A determination by the Government not to open the requirement to competition based upon the responses to this notice is solely within the discretion of the Government. See note 22.
- Record
- SN01097586-W 20060727/060725221312 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |