SOURCES SOUGHT
59 -- Product Qualification for S-Band Antennas
- Notice Date
- 8/14/2006
- Notice Type
- Sources Sought
- Contracting Office
- N68936 Naval Air Warfare Center Weapons Division Dept.2 429 E. Bowen Rd - Stop 4015 China Lake, CA
- ZIP Code
- 00000
- Solicitation Number
- N6893606R0032
- Response Due
- 9/13/2006
- Archive Date
- 11/13/2006
- Description
- THIS SPECIAL NOTICE IS NOT A REQUEST FOR PROPOSAL. It is a product qualification opportunity. The Naval Air Warfare Center Weapons Division, China Lake, CA intends to procure S-Band Antennas as a component of a telemetry system for the Sidewinder Missile project in approximately summer 2007. Product must be qualified before contract award. A minimum of 100 units will be ordered and a maximum of 750 units may be ordered over the five-year period of performance. This procurement was previously a 100% small business set aside. The antenna must meet the required form, fit, and function requirements of specification AS-6165, AS-6165 with exception, NOR 25379.2, and drawing 639AS9493 Revision B, for a pre-existing missile telemetry fabrication package. This includes operating into a nominal 50 ohm load on a specified frequency in the ultra high frequency (UHF) telemetry band from 2200 to 2260.5 MHz. The Antenna VSWR at the unconnected end of the cable shall be 1:5 to! 1 maximum across the frequency band specified. This requirement is for components of a pre-designed telemetry section on the Sidewinder Missile System. To qualify a product under drawing 639AS9493B, the contractor shall, at their own expense, perform all qualification test required and submit four (4) units that meet all the requirements of specification AS-6165, with Exception, NOR 25379.2, and drawing 639AS9493 Revision B; and submit all test data for the qualification units to the procuring activity for evaluation. The contractor must also furnish any additional information requested by the procuring activity. The qualification units shall be manufactured using the same methods, materials, parts, processes, equipment, and procedures proposed for production. Each qualification unit shall meet all specified requirements. Failure of any qualification unit to meet any of the requirements shall be cause for rejection. The contractor will be notified approximately 30 days after the submission of the product and test data, whether the pro duct passed or failed the qualification testing. For a copy of specification AS-6165, AS-6165 with exception, NOR 25379.2, and drawing 639AS9493 Revision B, send a written request to Kim Matsunaga, Contract Specialist, by electronic mail to Kim.Matsunaga@navy.mil, or by fax at 760-939-8329. For technical questions, please contact Deane Campbell by electronic mail to Deane.Campbell@navy.mil or by phone at 760-939-6871. NAICS Code = 334220 Place of Performance = N/A Set Aside = N/A
- Record
- SN01114687-W 20060816/060814221312 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |