Loren Data's SAM Daily™

FBO DAILY ISSUE OF AUGUST 18, 2006 FBO #1726
MODIFICATION

Y -- Tennant Eco-HPS floor coating: Preparation and Installation in Helicopter Hangar at USCG Air Station New Olreans, LA

Notice Date

8/16/2006
 

Notice Type

Modification
 

NAICS

238330 — Flooring Contractors
 

Contracting Office

Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (fp), USCG Integrated Support Command New Orleans, 4640 Urquhart Street, New Orleans, LA, 70117-4698
 

ZIP Code

70117-4698
 

Solicitation Number

HSCG29-06-Q-8WN607
 

Response Due

8/23/2006
 

Archive Date

9/7/2006
 

Point of Contact

Greg Hermsen, Purchasing Agent, Phone 504-678-7645, Fax 504-678-7971, - Greg Hermsen, Purchasing Agent, Phone 504-678-7645, Fax 504-678-7971,
 

E-Mail Address

Gregory.M.Hermsen@uscg.mil, Gregory.M.Hermsen@uscg.mil
 

Small Business Set-Aside

Total Small Business
 

Description

Please provide a quote for each space/room in accordance with the following scope of work: Air Station New Orleans, LA Hanger & Shop Space Floor Coating Scope of work Hanger 13,500 SF Prepare floor for new coating Patch all cracks and voids Prime floor to eliminate potential shadowing Apply 1 (20mm) coat Epoxy and 1 (3.5 mm) coat of Tennant ECO-HPS top coat white Repaint existing red, black, yellow lines Repaint black yellow grounding points Maintenance Control 672 SF Remove existing vinyl flooring Prepare floor for new coating Patch all cracks and voids Prime floor to eliminate potential shadowing Apply 1 (20mm) coat Epoxy and 1 (3.5mm) coat to Tennant Eco-HPS topcoat white Ready Gear Room 160 SF Remove existing vinyl flooring Prepare floor for new coating Patch all cracks and voids Prime floor to eliminate potential shadowing Apply 1 (20mm) coat Epoxy and 1 (3.5mm) coat of Tennant ECO-HPS topcoat white AST Gear Issue Room 256 SF Remove existing vinyl flooring Prepare floor for new coating Patch all cracks and voids Prime floor to eliminate potential shadowing Apply 1 (20mm) coat Epoxy and 1 (3.5mm) coat to Tennant ECO-HPS to topcoat white AST Shop 960 SF Remove existing vinyl flooring Prepare floor for new coating Patch all cracks and voids Prime floor to eliminate potential shadowing Apply 1 (20mm) coat Epoxy and 1 (3.5mm) coat of Tennant ECO-HPS topcoat white Tool Room 143 SF Remove existing vinyl flooring Prepare floor for new coating Patch all cracks and voids Prime floor to eliminate potential shadowing Apply 1 (20mm) coat Epoxy and 1 (3.5mm) coat of Tennant ECO-HPS topcoat white Helo Shop Office 209 SF Remove existing vinyl flooring Prepare floor for new coating Patch all cracks and voids Prime floor to eliminate potential shadowing Apply 1 (20mm) coat Epoxy and 1 (3.5mm) coat of Tennant ECO-HPS topcoat white Helo Shop 800 SF Remove existing vinyl flooring Prepare floor for new coating Patch all cracks and voids Prime floor to eliminate potential shadowing Apply 1 (20mm) coat Epoxy and 1 (3.5mm) coat of Tennant ECO-HPS topcoat white Engine Shop 540 SF Remove existing vinyl flooring Prepare floor for new coating Patch all cracks and voids Prime floor to eliminate potential shadowing Apply 1 (20mm) coat Epoxy and 1 (3.5mm) coat of Tennant ECO-HPS topcoat white Metal Shop 920 SF Remove existing vinyl flooring Prepare floor for new coating Patch all cracks and voids Prime floor to eliminate potential shadowing Apply 1 (20mm) coat Epoxy and 1 (3.5mm) coat of Tennant ECO-HPS topcoat white Contractor is responsible for the disposal of all waste and proper handling of hazardous materials. All work is to be completed within 14 days of commencement. Site visit is required prior to submission of quote at contractors expense. Contractor is responsible to obtain all required permits. Work shall not conflict or interfere with current building contractor in completion of Phase III: “Air Station New Orleans hangar rehabilitation.” To schedule a site visit please contact SK1 Willingham at (504) 393-6083. For technical questions please contact SK1 Willingham at (504) 339-6083. Federal Acquisition Regulation Clauses and the Department of Labor Wage Dates for Construction are included and are applicable. Upon award, Contractor will be required to register in the Central Contractors Registration (CCR). For further information please visit www.CCR.gov. After award, Contractor will be required to submit weekly payroll forms for all personnel working on job site. When submitting your quote please provide a minimum of 3 past performance references for same or similar projects. Tennant ECO-HPS (or equal, in accordance with FAR 52.211-6) coating will be used for this project. 52.211-6 Brand Name or Equal. As prescribed in 11.107(a), insert the following provision: BRAND NAME OR EQUAL (AUG 1999) (a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government’s needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation. (b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must— (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by— (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation. For administrative questions, please contact Greg Hermsen at (504) 678-7645. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (16-AUG-2006); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
 

Web Link

Link to FedBizOpps document.
(http://www.fbo.gov/spg/DHS/USCG/COUSCGISCNO/HSCG29-06-Q-8WN607/listing.html)
 

Place of Performance

Address: USCG AIRSTA New Orleans 400 Russell Avenue, BLDG 309 New Orleans, LA

Zip Code: 70143

Country: UNITED STATES
 

Record

SN01117585-F 20060818/060816224936 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |