Loren Data's SAM Daily™

FBO DAILY ISSUE OF AUGUST 20, 2006 FBO #1728
SOLICITATION NOTICE

43 -- compressor and associated hardware

Notice Date

8/18/2006
 

Notice Type

Solicitation Notice
 

NAICS

423830 — Industrial Machinery and Equipment Merchant Wholesalers
 

Contracting Office

Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (fcp), U.S. Coast Guard Training Center Cape May, Administration Building Room 212A, Cape May, NJ, 08204-5092
 

ZIP Code

08204-5092
 

Solicitation Number

HSCG42-06-Q-QNE843
 

Response Due

9/5/2006
 

Archive Date

9/20/2006
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The request for quotation solicitation number is HSCG42-06-Q-QNE843. North American Industry Classification System (NAICS) code is 423830 and size standard is 100 employees. Solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-12. This notice is issued by the U.S. Coast Guard Training Center, Cape May, NJ requesting detailed cost/technical proposals from sources capable of providing the commercial items with specified salient features described herein. Please be advised that the USCG intends to procure the new compressor and hardware ONLY and government personnel will be installing all new items. ROTARY SCREW COMPRESSOR 15 HP Rotary Screw Air Compressor Capacity- 55 cfm @ 125 PSIG Maximum Operating Pressure- 125 psig Outlet Size- .75'' NPT Dimensions- Length x Width x Height: 41" x 28.9" x 36" Baseplate 53.6" x 28.9" x 60.7" 80-gal Tank Mtd 74.7" x 28.9" x 60.7" 120-gal Tank Mtd Weight: 960 lb. 120-gal Tank Mounted Package Amp Draw Table: 230/3/60- 37 Amps 575/3/60- 15 Amps Standard enclosure- 69 dBA Aftercooler CTD- 20?F Fan Air Flow- 1060 cfm Items as specified below Nema 1 with Open Drip Proof Motor and Full Voltage Starter 120 Gallon Receiver Electric Drain Package Pre-Filter Start-Up Kit VFD COMPRESSOR Capacity: 22-26 CFM Target Operating Pressure Range: 85-150 PSIG Maximum Operating Pressure: 159PSIG Outlet Size: .75" NPT Aftercooler CTD: 5 ?F Fan Air Flow: 1600 cfm Dimensions: Length x Width x Height: 52" x 29" x 33" Baseplate 75" x 29" x 58" 120-gal Tank Mtd Weight: 977 lb. 120-gal Tank Mounted Package Amp Draw @ 115 PSIG: 200/3/60- 29.9 Amps 220/3/50- 27.2 Amps 230/3/60- 26.0 Amps Sound Level: per CAGI-PNEUROP PN2CPTC2 Standard enclosure- 67 dBA Items as specified below Motor, Low Voltage, TEFC Enclosure Low Sound Enclosure Receiver 120 Gal Ultra Plus Coolant Start-Up Kit DRYER Technical Information: Capacity- 100 scfm * *Based on 100 psig, 100? F inlet air, 100? F ambient Dewpoint- 33?-39?F Maximum Operating Pressure- 175 PSIG Weight- 144 lbs Dimensions- (L x W x H)- 24''x 22''x 31" Condensate Connection - 3/8" O.D. Drain Tubing Air Cooled Data - Fan Airflow - 475 cfm Compressed Air Connections - 11/2" NPT Items as specified below TS100A 115/1/60 Aircooled Refrig Dryer FILTER Technical Information: Capacity- 123 scfm Connection Size- 3/4" NPT Max Pressure (psig)- 232 Drain Type- Automatic Float - 1/4'' ID Tube Connection Weight- 5 lbs Dimensions- (W x H)- 5.1'' x 13.9'' ** ** Clearance of 5.5'' is suggested for element replacement 1 IRGP123 General Purpose Coalescing/Particulate Filter GP - General Purpose Filter designed to remove bulk particles (1 micron and larger) and oil (.5 mg/m3) at rated conditions. Primary purpose is to protect down stream filtration and drying equipment from large contaminants. EDV-2000 110V 1/4" NPT The EDV-2000 is a full-feature automatic drain-valve that effectively removes condensate from compressors, receivers, dryers, aftercooler, filters, and driplegs. Each EDV-2000 includes a manual bypass and a strainer/ball valve assembly. Spare Element Differential Pressure Indicator OIL SEPERATOR Technical Information: Max SCFM: 60 Max HP 15 Condensate Inlets: Qty (1) 1/2"NPT Dimensions - (L x W x H) - 11.5''x 11.5''x 27.5" Adsorption Module: AM060 Items as specified below 1 PS-60 Oil/Water Separator The PolySep helps protect and maintain the environment by efficiently separating oil from the condensate, which allows you to return up to 99.9% of the condensate to the sanitary sewers. Shipping terms will be FOB destination and will be delivered to the following address: ISD Building #282, USCG Training Center, Cape May, NJ 08204 between the hours of 0900 and 1500 Monday through Friday and shall be coordinated with the designated technical representative. Inspection & Acceptance will be conducted at the destination. The required delivery date is 45 days after notice of award or earlier. The award will be a firm, fixed-price order and will be awarded utilizing Simplified Acquisition Procedures. The Contractor shall extend to the Government the full coverage of any standard commercial warranty normally offered in a similar sale, provided such warranty is available at no additional cost to the government. If a change occurs in this requirement, only those offerors that respond to this announcement within the required timeframe will be provided any changes/amendments and considered for future discussions and/or award. The government will award an order resulting from this solicitation to the responsible offeror whose offer conforms to the solicitation that will be most advantageous to the government, price and other factors considered. The government reserves the right to evaluate technical compliance/conformance with specifications as indicated and make a best value decision. This could result in award to other than the lowest price offer. All responsible sources may submit an offer which will be considered by the agency. All potential sources must obtain a DUNS number and register in the Central Contractor Registration (CCR) in order to transact business with the United States Coast Guard. Failure to obtain a DUNS number and register in the CCR may result in the delay of award of a contract or possible award to the next otherwise successful offeror who is registered in the CCR at the time of award. All written proposals along with the required completed clauses/provisions and information requested herein must be submitted and received at this office on or before September 5, 2006 at 3:00 PM eastern time. Send all written proposals to the following address: Contracting Officer, U.S. Coast Guard Training Center, Administration Bldg Room 212A, Cape May, NJ 08204-5095, Attn: Shirley Green. Quotes may also be submitted via e-mail to Shirley.L.Green@uscg.mil ; Facsimile proposals will not be accepted. Please direct all technical questions regarding this procurement to LT. Matt Bournonville at (609) 898-6401 or Matt.A.Bournonville@uscg.mil Magnitude of the procurement is BELOW $25,000. This is NOT a sealed bid advertisement, and proposals will NOT be publicly opened. ********************************************************************** Quotes shall be submitted on company letterhead stationary and must include the following items: **Company Name **Company Address, Points of Contact, Phone numbers and e-mail addresses **Nomenclature **Part Number **Unit Price **Extended Price **FOB Destination **Any discount points for prompt payment **Business Size standard and minority classification **Commercial and Government Entity (CAGE) code **DUNS number **Tax ID number (TIN) **CCR registration status **Completed Offeror Representations and Certifications-Commercial Items (ORCA), FAR 52.212-3. **Provide for evaluation, prices and delivery as well as a narrative and all pertinent sales literature showing how the proposed item meets the United States Coast Guard?s specifications. **Past performance information shall include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contacts with telephone number and other relevant information). Offerors shall furnish this information for at least three contracts, ongoing or completed within the last three years, for like or similar services held with the U.S. Coast Guard, other Government agencies or private industries. Only new items may be utilized to meet this requirement. The Contractor will furnish a Certificate of Conformance in accordance with Federal Acquisition Regulation (FAR) Clause 52.246-15. The Certificate of Conformance shall be submitted in the format specified in the clause. The following FAR and HSAR provisions and clauses apply to this request for quotation and are incorporated by reference. 52.252-2 Clauses Incorporated by Reference (FEB 1998). This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Full text of FAR clauses and provisions can be accessed electronically at the following address: www.arnet.gov. 52.212-1 Instructions to Offerors Commercial Items (JAN 2006) 52.212-3 Offeror Representations and Certifications. Commercial Items (JUN 2006). Offerors responding to this announcement must include a completed copy of provision. An offeror shall complete only paragraph (j) of this provision if the offeror has completed the annual representations and certifications electronically at http:// orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete paragraphs (b) through (i) of the provision. 52.212-4 Contract Terms and Conditions Commercial Items (SEP 2005) 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items. (AUG 2006) 52.204-4 Printed Copied Double-Sided on Recycled Paper (AUG 2000) 52.204-7 Central Contractor Registration (JUL 2006) 52.246-2 Inspection of Supplies, Fixed Price (AUG 1996). 52.247-34 F.O.B. Destination (NOV 1991) 52.211-17 Delivery of Excess Quantities (SEP 1989) 52.203-6 Restrictions on Subcontractor Sales to the Government (JUL 1995). Alternate I (OCT 1995). 52.219-8 Utilization of Small Business Concerns (MAY2004) 52.222-3 Convict Labor (June 2003) (E.O. 11755) 52.222-19 Child Labor-Cooperation with Authorities and Remedies (JAN 2006) (E.O. 13126) 52.222-21 Prohibition of Segregated Facilities (Feb 1999) 52.222-26 Equal Opportunity (APR 2002) (E.O. 11246) 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (DEC 2001) (38 U.S.C. 4212) 52.222-36 Affirmative Action for Workers with Disabilities (JUN 1998) (29 U.S.C. 793) 52.222-37 Employment Reports on Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans. (DEC 2001) (38 U.S.C. 4212) 52.223-6 Drug-Free Workplace (MAY 2001) 52.225-1 Buy American Act-Supplies (JUNE 2003) 52.225-13 Restrictions on Certain Foreign Purchases (FEB 2006) 52.232-33 Payment by Electronic Funds Transfer - Central Contractor Registration (OCT 2003) 3052.209-70 Prohibition on contracts with corporate expatriates. As prescribed at (HSAR) 48 CFR 3009.104-75, insert the following clause: PROHIBITION ON CONTRACTS WITH CORPORATE EXPATRIATES(JUN 2006) (a) Prohibitions. Section 835 of the Homeland Security Act, 6 U.S.C. 395, prohibits the Department of Homeland Security from entering into any contract with a foreign incorporated entity which is treated as an inverted domestic corporation as defined in this clause, or with any subsidiary of such an entity. The Secretary shall waive the prohibition with respect to any specific contract if the Secretary determines that the waiver is required in the interest of national security. (b) Definitions. As used in this clause: Expanded Affiliated Group means an affiliated group as defined in section 1504(a) of the Internal Revenue Code of 1986 (without regard to section 1504(b) of such Code), except that section 1504 of such Code shall be applied by substituting `more than 50 percent' for `at least 80 percent' each place it appears. Foreign Incorporated Entity means any entity which is, or but for subsection (b) of section 835 of the Homeland Security Act, 6 U.S.C. 395, would be, treated as a foreign corporation for purposes of the Internal Revenue Code of 1986. Inverted Domestic Corporation. A foreign incorporated entity shall be treated as an inverted domestic corporation if, pursuant to a plan (or a series of related transactions)? (1) The entity completes the direct or indirect acquisition of substantially all of the properties held directly or indirectly by a domestic corporation or substantially all of the properties constituting a trade or business of a domestic partnership; (2) After the acquisition at least 80 percent of the stock (by vote or value) of the entity is held? (i) In the case of an acquisition with respect to a domestic corporation, by former shareholders of the domestic corporation by reason of holding stock in the domestic corporation; or (ii) In the case of an acquisition with respect to a domestic partnership, by former partners of the domestic partnership by reason of holding a capital or profits interest in the domestic partnership; and (3) The expanded affiliated group which after the acquisition includes the entity does not have substantial business activities in the foreign country in which or under the law of which the entity is created or organized when compared to the total business activities of such expanded affiliated group. Person, domestic, and foreign have the meanings given such terms by paragraphs (1), (4), and (5) of section 7701(a) of the Internal Revenue Code of 1986, respectively. (c) Special rules. The following definitions and special rules shall apply when determining whether a foreign incorporated entity should be treated as an inverted domestic corporation. (1) Certain Stock Disregarded. For the purpose of treating a foreign incorporated entity as an inverted domestic corporation these shall not be taken into account in determining ownership: (i) Stock held by members of the expanded affiliated group which includes the foreign incorporated entity; or (ii) stock of such entity which is sold in a public offering related to the acquisition described in subsection (b)(1) of Section 835 of the Homeland Security Act, 6 U.S.C. 395(b)(1). (2) Plan Deemed In Certain Cases. If a foreign incorporated entity acquires directly or indirectly substantially all of the properties of a domestic corporation or partnership during the 4-year period beginning on the date which is 2 years before the ownership requirements of subsection (b)(2) are met, such actions shall be treated as pursuant to a plan. (3) Certain Transfers Disregarded. The transfer of properties or liabilities (including by contribution or distribution) shall be disregarded if such transfers are part of a plan a principal purpose of which is to avoid the purposes of this section. (d) Special Rule for Related Partnerships. For purposes of applying section 835(b) of the Homeland Security Act, 6 U.S.C. 395(b) to the acquisition of a domestic partnership, except as provided in regulations, all domestic partnerships which are under common control (within the meaning of section 482 of the Internal Revenue Code of 1986) shall be treated as a partnership. (e) Treatment of Certain Rights. (1) Certain rights shall be treated as stocks to the extent necessary to reflect the present value of all equitable interests incident to the transaction, as follows: (i) warrants; (ii) options; (iii) contracts to acquire stock; (iv) convertible debt instruments; and (v) others similar interests. (2) Rights labeled as stocks shall not be treated as stocks whenever it is deemed appropriate to do so to reflect the present value of the transaction or to disregard transactions whose recognition would defeat the purpose of Section 835. (f) Disclosure. The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104- 73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104- 73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104- 73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal. (End of provision)
 

Place of Performance

Address: USCG Training Center,, 1 Munro Avenue,, ISD Building #282,, Cape May, New Jersey

Zip Code: 08204

Country: UNITED STATES
 

Record

SN01119233-W 20060820/060818220618 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |