SOLICITATION NOTICE
44 -- AIR FILTRATION SYSTEM
- Notice Date
- 8/18/2006
- Notice Type
- Solicitation Notice
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AFFTC - AF Flight Test Center, 5 S WOLFE AVE, Edwards AFB, CA, 93524-1185
- ZIP Code
- 93524-1185
- Solicitation Number
- F1S2AA6164A100
- Response Due
- 8/24/2006
- Archive Date
- 9/8/2006
- Description
- The requirement is for a Industrial Dust Collector, model SPJ-18-X4B8 Pluse Jet Fabric Dust Collector and installation. The primary type of dust is wood dust from woodworking equipment. Model SPJ-18-X4B8 pulse jet fabric dust collector Bottom Removal without walk-in plenum (18) 4.5? dia x 8? bags with total surface area of 172ft(2) 17.6:1 Air-to-Cloth Ratio; 1-10 SCFM Compressed Air Required Installation: Work includes removal of existing system and installation of 10? ducting, from seven (7) machines plus two (2) floor sweeps connected to the above collector outside the building. Work will include galvanized pick-up / hoods, ducts, fittings, supports, flex ducts, floor sweeps, slide-gates, and, wall flashing. Collector Design Features: Patented high-velocity nozzle based cleaning system produces more energy to clean. Flow-restricting ventures are eliminated, thus reducing the filtered air velocity. Ow filtered air velocity is easily overcome by the cleaning air jet leaving more jet engery available to clean the filters. High side inlet with large drop out section reduces filter loading and produces downward air pattern inside collector housing. Wide bag spacing means low can velocity to help dust settle out into the hopper. Inlet baffling reduces abrasion of filters by the incoming dust laden air. Standard Construction Features: 12 gauge hot rolled steel housing, reinforced to withstand +/- 20 IWC static prussure, welded construction, pre-assembled to largest feasible shipping sections. Welded support structure designed to 100 MPH winds and Zone 3 seismic loads. Patented cleaning system with solid .0state timer pre-wired in NEMA 4 enclosure. 60 degree hopper with square discharge, flanged and pre-drilled for auxiliary equipment. Compressed air manifold mounted with pipe couplings on both ends for easy connection of air supply. Removable 20? x 20? hopper access panels and bag access door. One differential pressure gauge with connecting hardware. One full set of cages with mounting hardware, shipped separately. Prime finish, inside and outside, of zinc oxide primer and exterior finish coat of dark tan enamel paint.
- Place of Performance
- Address: EDWARDS AFB, CA
- Zip Code: 93524
- Country: UNITED STATES
- Zip Code: 93524
- Record
- SN01119395-W 20060820/060818220946 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |