PRESOL | 99 | DEWALT EQUIPMENT (GRAINGER #'S)

FBO DAILY ISSUE OF AUGUST 26, 2006 FBO #1734
SOLICITATION NOTICE

99 -- DEWALT EQUIPMENT (GRAINGER #'S)

Notice Date: 8/24/2006
Notice Type: Solicitation Notice
Contracting Office: Sa-6 Room 200, Washington, DC 20522
ZIP Code: 20522
Solicitation Number: 8650-612899
Response Due: 8/25/2006
Archive Date: 9/14/2006
Small Business Set-Aside: Total Small Business
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number is 8650-612899 and is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular . The associated North American Industrial Classification System (NAICS) code for this procurement is with a small business size standard of 0 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit a quote. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on Friday, August 25, 2006 at 16:30:00 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Springfield, VA 22153 The Department of State requires the following items, EXACT MATCH ONLY, to the following: LI 001, DRILL BIT SET,29 PC Drill Bit Set, Size 1/16 to 1/2 Inches, 29 Pieces, Pilot Point Grainger Item # 1NK11, 10, EA; LI 002, Hammer,SDS,24 V SDS Hammer, Voltage Rating 24 Volts, Drive System SDS Plus Inches, Speed 0-1150 RPM, Blows per Minute 0-5800 Blows per Minute, Battery Packs 2, Battery Pack Replacement 1VK69, Recharge Time 1 Hour, Capacity in Concrete 3/4 Inches, Tool Weight 9 Pounds, Tool Length 13.5 Inches, Includes Batteries, Charger, Side Handle, Depth Gauge, Case, Chipping Action 2 2.4 Ah Batteries, 7/8 Inches Grainger Item # 1PX36, 2, EA; LI 003, Chuck,Multipro Multipro Chuck, Allows Quick Changing of Bits Grainger Item # 1UH68, 2, EA; LI 004, CUTTING KIT Multipurpose Cutting Kit, For All Rotary Tools Grainger Item # 1UH73, 2, EA; LI 005, Drive,Right Angle Right Angle Drive, Ball Bearing Attachment for Rotary Tools Grainger Item # 1UH74, 2, EA; LI 006, Accessory Set Cleaning/Polishing Accessory Set, 20 Pieces Grainger Item # 1UH75, 2, EA; LI 007, Accessory Set Sanding/Grinding Accessory Set, 31 Pieces Grainger Item # 1UH76, 2, EA; LI 008, Accessory Set General Purpose Accessory Set, 52 Pieces Grainger Item # 1UH77, 2, EA; LI 009, Accessory Set Cut Off Wheel Accessory Set, 69 Pieces Grainger Item # 1UH78, 2, EA; LI 010, BATTERY,FAN COOLED,24V Fan Cooled Battery, Voltage Rating 24 Volts, XR+ Battery Pack Grainger Item # 1VK69, 2, EA; LI 011, BLADE,RECIPROCATING,11 Reciprocating Saw Blade Assortment, 11 Different Sizes, Vinyl Pouch Grainger Item # 2Q516, 24, EA; LI 012, Rotary Tool,High Speed Variable Speed Rotary Tool, 5,000 To 35,000 RPM, 1.15 Amps @ 120 Volts, Tool Weight 1 Pound, Tool Length 8 Inches Long, Includes 77 Accessories, Garden Sharpener, Flex-Shaft, and Two Spring Clamps. Grainger Item # 3EB96, 1, EA; LI 013, Hammer Drill Kit,24 V Hammer Drill Kit, Voltage Rating 24 Volts, Speed 0-450/0-2000 RPM, Tool Length 11.5 Inches, Tool Weight 8.7 Pounds, Blows per Minute 0-2650/0-34000, Capacity in Concrete 1/2 Inch, Drive System 1/2 Inch, Battery Packs 2, Recharge Time 1 Hour, Battery Pack Replacement 1VK69 Grainger Item # 3KA78, 2, EA; LI 014, DRILL KIT,1/2 IN Reversible Right Angle Drill Kit, Drill 1/2 Inch, Drill Speed 400/600/900 RPM, Current @ 120 VAC 7 Amps, Gear System Triple Grainger Item # 3MH98, 2, EA; LI 015, Shaft,Flex Flex Shaft, Attachment for Single Speed Moto Tool 3W839 Grainger Item # 3W840, 2, EA; LI 016, Cut Off Tool Metal,18v 18 Volt Metal Cut-Off Tool 4-1/2 Inch, 6500 RPM, 5/8-11 Thread Spindle, Tool Length 11.5 Inches, Tool Weight 5.5 Pounds, Has Metal Gear Housing, Keyless Guard, Lock-On Trigger Switch, 3 Position Handle, Includes 2 Batteries, One Hour Charger, Side Handle And Carry Case. Ideal For Cutting Bolts, Rebar Stud And Etc. For Light Duty Grinding And Sanding Applications Only. Grainger Item # 3WY80, 3, EA; LI 017, Battery10.8 V Battery For Cordless Tool Kit, Stock No. 3XA71, 10.8 Volt Grainger Item # 3XA69, 2, EA; LI 018, Cordless Rotary Tool Cordless Rotary Tool With A 10.4 Volt Lithium Ion Battery, Variable Speeds >From 5,000 to 35,000 RPM, Battery Recharge Time 3 Hours,Tool Length 9 inches long, Weight is 0.5 Pounds, Includes Battery, Charger, Carring Case and 60 accessories. Grainger Item # 3XA71, 2, EA; LI 019, Kit,Accessory,Grinding Super Accessory Kit 145 PC Kit Carrying Case & Sharpener Grainger Item # 3XA72, 4, EA; LI 020, Recip Saw Blade Recip Saw Blade 15 PC Recip Saw Blade Tough Case Set Grainger Item # 4DV61, 16, EA; LI 021, Drill/Driver,Cordless Cordless Drill/Driver Kit, Chuck Size 1/2 In, Clutch Style Adjustable, Keyless All Metal Ratcheting Lock Chuck, Handle Type Anti Slip T, Drill Speed 0-450/0-1400/0-1800 RPM, Tool Weight 4.9 lb, Tool Length 9.25 In, Volts 18.0, VSR, 3 Speed All Metal Transmission, Max Torque 500 Inch/Pounds, Bearings Ball and Roller, Replacement Battery Pack 4GA70, Includes 1 Hour 120 Volt Charger, (2) 2.4 Amp Hour Extended Run Battery Packs, Double Ended Bit and Carrying Case Grainger Item # 4EB31, 2, EA; LI 022, Drill Hammer,Cordless Cordless Hammer Drill/Driver, Keyless All Metal Ratcheting Lock Chuck, Chuck Size 1/2 In, Volts 18.0, Drill Speed 0-450 0-1400 0-2000 RPM, Clutch Style Adjustable, 0-7650 0-34,000 0-24,650 Blows Per Min, Handle Type Antislip T, Max Torque 500 In-Lb, VSR, Drive System Ratchet Spring Mechanism, Tool Weight 6.0 lb, Tool Length 10 In, 3 Speed Metal Transmission, Bearings Ball/Roller, Replacement Battery Pack 4GA70, Includes 1 Hour 120 V Charger, 2 Battery Packs, Double End Bit, Carrying Case Grainger Item # 4EB32 (OR EQUAL DEWALT 18.0 VOLT REPLACEMENT), 2, EA; LI 023, Cordless Combo Kit,18v Cordless Combination Kit, Volts 18, 4EB32 Hammer Drill, 1PX41 SDS Rotary Hammer, 4CY88 Reciprocating Saw, 4LG25 Floodlight, (2) 4GA70 2.4 Amp Hour Battery Pack, 5MP78 120 Volt 1-Hour Charger, Plastic Carrying Case, Includes Reciprocating Saw Blade, (2) 360 Degree Side Handles, One Depth Rod, Double Ended Bit And Plastic Carrying Case Grainger Item # 4EB41 (OR EQUAL DEWALT 18.0 VOLT REPLACEMENT), 2, EA; LI 024, Cordless Combo Kit,18v Cordless Combination Kit, Volts 18, 4EB32 Hammer Drill, 4EB86 Circular Saw, 4CY88 Reciprocating Saw, 4VX24 Jigsaw, 4LG25 Floodlight, (2) 4GA70 2.4 Amp Hour Battery Pack, 5MP78 120 Volt 1-Hour Charger, Plastic Carrying Case, Includes 6 1/2 Inch Circular Saw Blade, 3 Jig Saw Blades, Reciprocating Saw Blade, Circular Saw Rip Fence, Double Ended Bit, 360 Degree Side Handle Grainger Item # 4EB43 (OR EQUAL DEWALT 18.0 VOLT REPLACEMENT), 6, EA; LI 025, Battery,18.0 V,2.4 Ah Nickel Cadmium Battery, 18.0 Volt Extended Run Plus, 2.4 Amp Hour, For Use With 18.0 Volt Tools and Accessories Grainger Item # 4GA70, 17, EA; LI 026, Portable Band Saw Kit Portable Band Saw Kit, Speeds Dial Control Variable, Surface Ft per Min Low 82, Surface Ft per Min High 280, Volts 120, Hz 60, Amps 6.0, Drive Worm Gear and Chain, Rectangle Capacity 4 3/4 x 4 3/4 In, Round Capacity 4 3/4 In, Handle Design D with Front T, Blade Size 44 7/8 In, Bearings Ball and Needle, Tool Length 21 In, Tool Weight 15 Lb, Standards UL and CSA, Includes 14 Teeth Bi Metal Blade, Wrench, Adjustable Material Stop, Plastic Carrying Case Grainger Item # 4GA72, 1, EA; LI 027, Charger,Battery,2 Port Two Port Battery Charger, Charges Two 7.2 to 18 Volt Batteries At The Same Time, Voltage 120 VAC, 3 Stage Charger Features 1 Hour Maximum Charge/Equalization Of Individual Cell Charging/Trickle Charge Grainger Item # 4GA74, 2, EA; LI 028, Accessory Kit,100 PC Accessory Kit, Number of Pieces 100, Includes Black Oxide Pilot Point Drill Bits 16 Pcs 1/16-3/8 In, Compact Drive Guide, Clear Drive Guide, Nutdriver Sizes 1/4-3/8 In, Socket Adapter 1/4 and 3/8 In, Sockets 1/4-7/16 In with 1/4 In Drive, 1/2 and 9/16 In with 3/8 In Drive, Black Oxide Drill Bits 6 Pcs 1/16-1/4 Inch with 1/4 In Hex Shank, 3 Drywall Dimplers, Rapid Load Holder, Screwdriver Bits 58 Pcs Phillips, Square, Slotted and Double Ended Bits, Carrying Case Grainger Item # 4GA78, 14, EA; LI 029, Accessory Set,45 PC Combination Accessory Set, Number of Pieces 45, Includes Black Oxide Pilot Point Drill Bits (1) 1/16, 5/64, 3/32, 7/64, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 In, Phillips Bits (2) #1 and #3 x 1, (2) #2 x 2, Square Bits (1) #1 x 1, (3) #2 x 1, (2) #2 x 2, Slotted Bits (2) #8 x 2, Recip Saw Blades (2) 6 In Long 6 TPI For Wood and 18 TPI For Metal, Circular Saw Blades (1) 6 1/2 In Dia 24 Teeth with 5/8 In Arbor Hole and 90 Teeth with 5/8 Arbor Hole, Carrying Case For Bits and Recip Blades Only Grainger Item # 4JB79, 12, EA; LI 030, BACKING PAD,4 1/2 IN Sanding Backing Pad, Disc Diameter 4 1/2 Inches, Thread 5/8-11 Inches, Maximum Speed 12,000 RPM, Disc Assembly, Rubber Pad, With Locking Nut Grainger Item # 4KZ72, 4, EA; LI 031, CHOP SAW WHEEL,14 DIA Chop Saw Wheel, Type 1, Dia 14 In, Thickness 7/64 In, Arbor Hole 1 In, Max RPM 4300, Material Aluminum Oxide, Wheel Specifications A24R, For Use With Stationary Cut Off Machine, For General Purpose Grainger Item # 4LD94, 10, EA; LI 032, CHOP SAW,14 IN High Power Metal Cutting Chop Saw, Blade Diameter 14 Inches, Cutting Capacity 5 Inches, No Load Speed 3800 RPM, Current @ 120 VAC 15 Amps, Arbor Diameter 1 Inch, Tool Weight 40 Pounds, Features 1 Wheel and Wrench, Vise Grainger Item # 4PC48, 1, EA; LI 033, SCREWDRIVER SET Screwdriver Set, Number of Pieces 37, Magnetic Bit Holder and Assorted Bits, Drill and Screw Bit Grainger Item # 4WM46, 10, EA; LI 034, Shear,Cordless Kit,18v Cordless Shear Kit, Volts 18.0 VDC, Stainless Steel Capacity 20 Gauge, Steel Capacity 18 to 28 Gauge, Waste Curl 7/32 In, Min Radius 5 1/2 In, Speed Range 0 to 2300 SFPM, Swivel Angle 360 Deg, Bearings Ball and Roller, Replacement Battery Pack 4GA70, UL Rating, Tool Weight 6.1 Lb, Tool Length 15 In, Includes 1 Hour 120 Volt Charger, 1 Battery, Blade Wrench, Carrying Case Grainger Item # 4YB77, 1, EA; LI 035, DISC,ABRASIVE,36 GRIT Abrasive Fiber Disc, Grit 36, Size 4 1/2 x 7/8 Inches, CAP Code F226, Aluminum Oxide, For General Purpose Use Grainger Item # 5A948, 6, EA; LI 036, DISC,ABRASIVE,80 GRIT Abrasive Fiber Disc, Grit 80, Size 4 1/2 x 7/8 Inches, CAP Code F226, Aluminum Oxide, For General Purpose Use Grainger Item # 5A951, 6, EA; LI 037, DISC,ABRASIVE,120 GRIT Abrasive Fiber Disc, Grit 120, Size 4 1/2 x 7/8 Inches, CAP Code F226, Aluminum Oxide, For General Purpose Use Grainger Item # 5A953, 6, EA; LI 038, CHARGER,7.2-18 V Charger, Charge Time 15 Minutes, Voltage Rating 7.2-18 Volts, For Use With All Black and Decker Models Except 4LF48, Dewalt Model DW9091, DW9072, DW9071, DW9070, DW9062, DW9061, DW9060, DW9051, DW9050, DW9048, DW9046, Additional Cordless Tool Accessories, 3 Stage Charging Process Grainger Item # 5MP79, 2, EA; LI 039, Grinder Tool Stand Flex Shaft Grinder Tool Stand, For 6A423 Grainger Item # 6A425, 2, EA; LI 040, Abrasive Cut Off Wheel Abrasive Cut Off Wheel, Type 1, Dia 4 1/2 In, Thickness 0.045 In, Arbor Hole 7/8 In, Max RPM 13,300, Material Aluminum Oxide, Wheel Specifications A60T, For Use With Angle Grinder, For Metal Cutting Grainger Item # 6HD44, 31, EA; LI 041, Ladder,Fg,22 Ft Multipurpose Ladder, Telescoping, Fiberglass, Length 22 Feet, ANSI Type 1A, Capacity 300 Pounds, Extended Ladder Height 11 to 19 Feet, Stepladder Height 5 to 9 Feet, Scaffold Height 5 Feet, Storage Height 5.5 Feet, Includes Instructional Video and Manual Grainger Item # 4DB25, 1, EA; LI 042, Ladder,Fg,17 Ft Multipurpose Ladder, Telescoping, Fiberglass, Length 17 Feet, ANSI Type 1A, Capacity 300 Pounds, Extended Ladder Height 9 to 15 Feet, Stepladder Height 4 to 7 Feet, Scaffold Height 4 Feet, Storage Height 4.5 Feet, Includes Instructional Video and Manual Grainger Item # 4DB24, 1, EA; LI 043, Ladder,Fg,13 Ft Multipurpose Ladder, Telescoping, Fiberglass, Length 13 Feet, ANSI Type 1A, Capacity 300 Pounds, Extended Ladder Height 7 to 11 Feet, Stepladder Height 3 to 5 Feet, Scaffold Height 3 Feet, Storage Height 3.5 Feet, Includes Instructional Video and Manual Grainger Item # 4DB23, 2, EA; LI 044, WORK PLATFORM,ALUM Work Platform, 11 x 11 Inches, For Telescopic Ladders Grainger Item # 4XN33, 4, EA; LI 045, LADDER,FG,2 FT I ANSI,19 1/2 In Base Spread Grainger Item # 4XN69, 4, EA; LI 046, LADDER,FG,4 FT Fiberglass Stepladder, Ladder Height 4 Feet, ANSI Type IAA, Base Spread 29 3/4 Inches, Bottom Width 20 1/2 Inches Grainger Item # 6JJ81, 10, EA; LI 047, LADDER,FG,6 FT Fiberglass Stepladder, Ladder Height 6 Feet, ANSI Type IAA, Base Spread 42 Inches, Bottom Width 24 3/8 Inches Grainger Item # 6JJ82, 10, EA; LI 048, LADDER,FG,8 FT Fiberglass Stepladder, Ladder Height 8 Feet, ANSI Type IAA, Base Spread 54 3/4 Inches, Bottom Width 27 7/8 Inches Grainger Item # 6JJ83, 10, EA; LI 049, Ladder,Fg,10 Ft Fiberglass Stepladder, Ladder Height 10 Feet, ANSI Type IAA, Base Spread 66 5/8 Inches, Bottom Width 31 3/8 Inches Grainger Item # 6JJ84, 5, EA; LI 050, LADDER,FG,2 FT I ANSI,19 1/2 In Base Spread Grainger Item # 4XN69, 10, EA; LI 051, LADDER,FG,4 FT Fiberglass Stepladder, Ladder Height 4 Feet, ANSI Type IAA, Base Spread 30 1/2 Inches, Bottom Width 21 1/2 Inches Grainger Item # 4XN71, 2, EA; LI 052, LADDER,FG,6 FT Fiberglass Stepladder, Ladder Height 6 Feet, ANSI Type IAA, Base Spread 42 7/8 Inches, Bottom Width 24 5/8 Inches Grainger Item # 4XN72, 2, EA; LI 053, LADDER,FG,8 FT Fiberglass Stepladder, Ladder Height 8 Feet, ANSI Type IAA, Base Spread 55 1/4 Inches, Bottom Width 28 1/8 Inches Grainger Item # 4XN73, 2, EA; LI 054, LADDER,FG,10 FT Fiberglass Stepladder, Ladder Height 10 Feet, ANSI Type IAA, Base Spread 67 1/2 Inches, Bottom Width 31 5/8 Inches Grainger Item # 4XN74, 2, EA; LI 055, Ladder,Fg,15 Ft Articulating Folding Ladder, Ladder Height 15 Feet, ANSI Type IA, Load Capacity 300 Pounds, Stepladder Height 7 1/2 Feet, Material Fiberglass, Scaffold Height 52 Inches, Performs As Stepladder, Double Ladder, Stairway Ladder, Straight Ladder, Over Hang Ladder, Mini Scaffold, Scaffold Grainger Item # 4EB25, 2, EA; LI 056, LADDER,FG,24 FT Fiberglass Extension Ladder, Ladder Height 24 Feet, ANSI Type IAA, Maximum Working Length 21 Feet, Outside Shoe Base Width 19 Inches, D Rung Grainger Item # 4XN99, 2, EA; LI 057, LADDER,FG,32 FT Fiberglass Extension Ladder, Ladder Height 32 Feet, ANSI Type IAA, Maximum Working Length 29 Feet, Outside Shoe Base Width 19 Inches, D Rung Grainger Item # 4XP02, 2, EA; LI 058, LADDER,FG,4 FT Fiberglass Stepladder, Ladder Height 4 Feet, ANSI Type IAA, Base Spread 29 3/4 Inches, Bottom Width 20 1/2 Inches Grainger Item # 6JJ81, 5, EA; LI 059, LADDER,FG,6 FT Fiberglass Stepladder, Ladder Height 6 Feet, ANSI Type IAA, Base Spread 42 Inches, Bottom Width 24 3/8 Inches Grainger Item # 6JJ82, 5, EA; LI 060, LADDER,FG,8 FT Fiberglass Stepladder, Ladder Height 8 Feet, ANSI Type IAA, Base Spread 54 3/4 Inches, Bottom Width 27 7/8 Inches Grainger Item # 6JJ83, 5, EA; LI 061, Ladder,Fg,10 Ft Fiberglass Stepladder, Ladder Height 10 Feet, ANSI Type IAA, Base Spread 66 5/8 Inches, Bottom Width 31 3/8 Inches Grainger Item # 6JJ84, 5, EA; LI 062, LADDER,FG,12 FT Fiberglass Stepladder, Ladder Height 12 Feet, ANSI Type IAA, Base Spread 79 Inches, Bottom Width 34 3/8 Inches Grainger Item # 6JJ85, 5, EA; For this solicitation, Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. Department of State is taking this action in a an effort to improve vendor access and awareness of requests while expediting its ability to gather multiple, completed, real-time offers. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their offer using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make an offer on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith offers, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, contact David Livingston at livingstondj@state.gov or FedBid.com at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. ALL ITEMS MUST BE DELIVERED BY SEPT 21, 2006. NO EXCEPTIONSIF YOU CANNOT DELIVER ENTIRE QTY BY SEPT 21, 2006, DO NOT BID. NO EXCEPTIONS. CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov.
Web Link: www.fedbid.com (a-31192, n-3171)
(http://www.fedbid.com)
Place of Performance: Address: Springfield, VA 22153; Zip Code: 22153; Country: US
Record: SN01124497-W 20060826/060824220638 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

99 -- DEWALT EQUIPMENT (GRAINGER #'S)