MODIFICATION
23 -- Utility Trailer
- Notice Date
- 8/31/2006
- Notice Type
- Modification
- NAICS
- 333999
— All Other Miscellaneous General Purpose Machinery Manufacturing
- Contracting Office
- Department of the Air Force, Air Combat Command, 27 CONS, 511 North Torch Blvd, Cannon AFB, NM, 88103-5109
- ZIP Code
- 88103-5109
- Solicitation Number
- FA4855-06-Q-0007
- Response Due
- 9/8/2006
- Archive Date
- 9/23/2006
- Point of Contact
- Fran Boilore, System Administration (Location Administrator), Phone 505-784-4503, Fax 505-784-1148, - Patricia Thatcher, Contract Administrator, Phone 505-784-2890, Fax 505-784-1147,
- E-Mail Address
-
fran.boilore@cannon.af.mil, patty.thatcher@cannon.af.mil
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemental with additional information included in this notice. This solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) 2005-12, Defense Federal Acquisition Regulation Supplement Change Notice (DCN) 20060814, and Air Force Acquisition Circular (AFAC) 2006-0515. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The solicitation number for this procurement is FA4855-06-Q-0007 and is a Request for Quotation (RFQ). Submit written offers only, oral offers will not be accepted. All firms or individuals responding must be registered with the Central Contractor Registration (CCR). Information concerning CCR registration requirements may be viewed via the Internet at http://www.ccr.gov or by calling the CCR Registration Center at 1-888-227-2423. This solicitation is a set-aside 100% for Small Business. The North American Industry Classification System (NAICS) is 333999 All Other Miscellaneous General Purpose Machinery Manufacturing. Small Business Size Standard is 500 employees. Only one contract will be awarded. It is the firm?s or individual?s responsibility to be familiar with applicable provisions and clauses. All FAR Provisions and Clauses may be viewed in full text at the Federal Acquisition Regulation Table of Contents via the Internet at http://farsite.hill.af.mi/vffar1.htm. All items shall be delivered FOB DESTINATION to 506 N DL Ingram Blvd, Cannon AFB NM 88103. This solicitation is for the procurement of the following specifications.: Engine (Cummins or Equivalent): 4BT3.9-C turbo charged diesel, balanced engine Drive: Generator, direct coupled, air compressor via electric clutch Weight: 3,700 lbs, (shipping) Carrier: 5,200 lbs, axle/leaf springs Hitch: Ball 1-7/8? to 2?, 6? height adjustment or pintle Container Length: 110? (with tool storage) Container Width: 80? (with fenders) Height (total): 66? Air Compressor: 185 CFM (at 100 psi) wet twin screw (Man GHH) (Meet California air compressor code 462, Sec 8) Generator: 25 KW standby 20 KW continuous 50 or 60 cycles Electric Outlets: 120 V single phase, 240 V, 480 V, 3 phase Welder: 400 Amp, may be used for stick, carbon arc gouging, plasma arc, stud and scratch start with remote control Light Towers: Will-Burt Night Scan (2 each 500 watt halogen light tower system) Auto Shutdown: Oil pressure, water, compressor, and cabin temperatures. Plasma Cutter Standard Equipment: 25? Remote Weld Power Cable 15? 12 V Jumper Cable 12 V Trouble Light Fire Extinguisher Weld Leads 50? Air Hose Leveling Jacks Emergency Flashers. CLIN 0001: Combination Power Maintenance Unit, one (1) EA with simultaneous Welder, Air Compressor, Electricity, Light Tower, Battery Charge and Jumper functions, trailer tongued assembly mounted. The Combination Unit shall have a steel constructed, acoustical foam insulated combination cabin which is trailer/tongue assembly mounted. The trailer/tongue assembly will have a pintle hook with 6? height adjustment. The trailer shall have electric brakes, minimum axle capacity of 5200 lbs, two (2) leveling jacks, and a minimum tire size of 225 x 15. The combination cabin shall include: one (1) Welder with the following specifications: minimum of 400 Amperes, high frequency converter power, constant power out put, multi process capability, auto hot start, carbon arc transfer stick, MIG short arc/spray, stud and TIG Gouging a minimum range selection of 100-180 and 180-400, and Panel and Remote power control; one (1) Air compressor with the following specifications; (wet) twin screw, 185 CFM, 90-150 PSI, dual on/off receptacles, compressor on/off electric clutch, drive via poly chain drive, coalesler oil separation, minimum quick drain valve oil capacity of 4.8 U.S. Gallons/18 Liters; one (1) Engine with the following specifications: minimum of 107 HP (Derated to 88 HP), minimum oil capacity of 9 quarts/8.5 Liters, CD Classification oil grade, minimum Coolant Capacity of 2 U.S. Gallons/7.6 Liters, Residential Muffler; minimum Fuel capacity of 50 U.S. Gallons/ 196 Liters, minimum 10-15 Hours continuous run, quick drain valve engine oil change, fuel filter with drain, and air filter; one (1) Generator with the following specification: 20 KW Continuous/28 mhp., 25 KW Standby/34.9 mhp., and simultaneous power available with 120V/1 phase, 240V/3 phase, 50 or 60 cycle 480V/3 phase, direct drive to engine, power receptacles (all voltages, circuit breaker protection (all voltages), and frequency (all voltages); and two (2) Adjustable Roof-Mounted Light Towers with the following specifications: each Tower shall support a minimum of two (2) 120VDC minimum halogen or two (2) 500 Watt AC minimum light fixtures, each Tower shall have a maximum stowed dimension of 32? x 26.5? x 9?, a maximum extended height of 32? full rotation and tilt by remote control, full erection time shall be a minimum of 6 seconds, a minimum wind capacity of 65 m.p.h.; and each tower weight shall be a maximum of 51 lbs. The Combination cabin shall include an instrument panel mounted on the front of the cabin with separate meters, circuit breakers, and receptacles for the Welder, Air Compressor, Engine, and Generator. The Combination cabin shall include Automatic Safety Shut Down accessible from the instrument panel for low engine oil pressure, high engine coolant temperature, high cabin temperature and high compressor oil temperature. The Combination cabin shall also have a minimum of six (6) emergency flashers, one (1) 25? Remote Weld Power Cable with weld leads, one (1) 50? Air Hose, one (1) set of 15? 12V Jumper Cables one (1) 12V Trouble Light, and one (1) fire extinguisher. CLIN 0002: Plasma Cutter, one (1) EA, with the following specifications; a minimum output of 15-60 amps continuously variable, minimum input power of 208-230 V, 1 phase, 50/60 Hz,, 61/56 amps, 460V, 3 Phase, 50/60 Hz, 18 amps, minimum duty cycle of 40%, panel controls with on/off and output amps, and panel indicators with AC power and temperature. The Plasma Cutter shall have a minimum height of 16?, a minimum width of 10?, a minimum length of 20?, a minimum weight of 72 lbs, and a minimum cut capacity of 7/8?, 1.25 severance. The unit shall have a torch of PCH-76, gas air/N2, minimum gas pressure of 60 psi, minimum gas flow of 3000SCFH, torch mounted control switch, minimum torch configuration of 70 degrees or 90 degrees, and a minimum lead length of 20 ft/50 ft. NOTE: Any offer submitted as a Brand Name or Equal must include required documentation in accordance with FAR Provision 52.211-6, Brand Name or Equal. FAR 52.212-1 Instructions to Offerors ? Commercial Items The following addenda is provided to this provision: Paragraph (b), entitled ?Submission of Offers?, Request for Quotation should be submitted shall contain the following information: Solicitation Number; Time Specified for Receipt of Offers; Name; Address; Telephone Number of Offerer; Terms of the Expressed Warranty; Price; Any Discount Terms and Acknowledgement of all Solicitation Amendments. Quote shall also contain all other documentation specified herein. Signed quotes must indicate quantity, unit price and total amount. Offers may be submitted via facsimile or mail. Paragraph (c), entitled ?Period of Acceptance for Offerers?, The offerer agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers. Paragraph (f)(1), entitled ?Late submissions, modifications, revisions, and with the drawls of offers?, Late offers: Request for Quotations or modification of quotes received at the address specified for the receipt of offers after the exact time specified for receipt of offers will not be considered. FAR 52.212-2 Evaluation ? Commercial Items The following addenda is provided to the provision: The Government will award a firm-fixed price contract resulting from this combined synopsis/solicitation to the responsible offerer whose offer conforming to the synopsis/solicitation will be the most advantageous to the Government, price and other factors considered. Award shall be based on All or None and Best Value to the Government. Best value can include but is not limited to price, delivery date, and technical capability. FAR 52-212-3 Offerer Representations and Certifications-Commercial Items. Complete only paragraph (j) of this provision if the annular representations and certificates have been completed electronically at http://orca.bpn.gov. If the annual representations and certifications has not been completed electronically at the ORCA website, then only paragraphs (b) through (i) of this provision need to be completed. FAR 52.211-6 Brand Name or Equal NOTE: Any Offer Submitted as an Or Equal Must Include Require Documentation In Accordance with this Provision FAR 52.212-4 (dev) Contract Terms and Conditions-Commercial Items FAR 52.212-5 (dev) Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items FAR 52.222-3 Convict Labor FAR 52.222-19 Child Labor-Cooperation with Authorities an Remedies FAR 52.222-21 Prohibition of Segregated Facilities FAR 52.222-26 Equal Opportunity FAR 52-222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans FAR 52.222-36 Affirmative Action for Workers with Disabilities FAR 52.222-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans. FAR 52.232-33 Payment by Electronic Funds Transfer?Central Contractor Regulation FAR 52.233-3 Protest After Award FAR 52.247-34 F.O.B. Destination FAR 52.252-1 Solicitation Provisions Incorporated by References FAR 52.252-2 Clauses Incorporated by Reference FAR 52-252-5 Authorized Deviations in Provisions FAR 52-252.6 Authorized Deviations in Clauses DFARS 252.204-7004 Required Central Contractor Registration DFARS 252.212-7000 Offerer Representations and Certifications-Commercial Items DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. DFARS 252.225-7000 Buy American Act-Balance of Payments Program Certificate DFARS 252.225-7001 Buy American Act and Balance of Payments program DFARS 252.232-7003 Electronic Submission of Payment Requests DFARS 252.225-7016 Restriction on Acquisition of Ball and Roller Bearings AFFARS 5352.201-9101 Ombudsman (see below POC) ** Col David Glowacki, 130 Douglas Street, Suite 210, Langley AFB VA 23665-2791, phone: 757-764-5371 fax 757-764-4400 e-mail: david glowacki@langley.af.mil** RESPONSE TIME: Request for Quotation will be accepted at the 27th Contracting Squadron, 511 N Torch Blvd, Bldg 300, Cannon AFB NM 88103-5109 NO LATER THAN 2:00 pm Mountain Time on 30 August 2006. Quotations may be faxed to 505-784-2959 with a signed original forwarded by mail. Facsimile offers will be accepted. Contracting Officer: Patricia Thatcher. Point of Contact for this Solicitation is: Fran Boilore, 505-784-1349, Fax 505-784-1349 e-mail Fran.Boilore@cannon.af.mil or Patricia Thatcher, 505-784-2890, Fax: 505-784-11477, e-mail patty.thatcher@cannon.af.mil. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (31-AUG-2006); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.fbo.gov/spg/USAF/ACC/27CONS/FA4855-06-Q-0007/listing.html)
- Place of Performance
- Address: Cannon AFB NM 88103
- Zip Code: 88103
- Country: UNITED STATES
- Zip Code: 88103
- Record
- SN01132312-F 20060902/060831230339 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |