MODIFICATION
55 -- Timber, Limber and Hardware
- Notice Date
- 9/7/2006
- Notice Type
- Modification
- NAICS
- 423310
— Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers
- Contracting Office
- Department of Commerce, National Oceanic and Atmospheric Administration (NOAA), Eastern Region Acquisition Division, Norfolk Federal Building, 200 Granby Street, Norfolk, VA, 23510
- ZIP Code
- 23510
- Solicitation Number
- EA133C-06-RQ-0940
- Response Due
- 9/14/2006
- Archive Date
- 9/29/2006
- Small Business Set-Aside
- Total Small Business
- Description
- **CORRECTION*** Correct line item 0011 Size to read 1" bolt size 3 1/4" OD. Correct line item 0012 Size to read 12" x 35'. Correct line item 0013 Size to read 4" x 12" x 8'. Correct line item 0014 Size to read 4" x 12" x 22'. Correct line item 0015 Size to read 3" x 8" x 22'. Correct line item 0016 Size to read 3" x 8" x 8'. Correct line item 0017 Size to read 3" x 8" x 22'. Correct line item 0018 Size to read 4" x 6" x 14'. Correct line item 0019 Size to read 4" x 6" x 22'. Correct line item 0020 Size to read 2" x 4" x 10'. Correct line item 0021 Size to read 6" x 6" x 20'. Correct title to read, 55 -Timber, Lumber and Hardware. All other terms and conditions remain the same. to read This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED. The request for quote (RFQ) number is EA133C-06-RQ-0940. The synopsis/solicitation constitutes a RFQ and incorporates provisions and clauses in effect through Federal Acquisition Circular 05-12. The RFQ is being issued as a Total Small Business Set-Aside. The associated North American Industry Classification System (NAICS) code is 423310. The National Oceanic and Atmospheric Administration (NOAA) require the following items: HARDWARE AND FASTNERS MATERIAL LIST: Item 0001, Ring Shank Nail Stainless Steel Qty. 23,000, Size 60 d- (6"), Treatment Type 304 Stainless Steel; Item 0002, Hex head bolts Qty. 375, Size 3/4" x 22", Treatment Hot Dip Galvanized; Item 0003, Weather Tuff bolt Qty. 205, Size 3/4" x 10", Treatment Hot Dip Galvanized; Item 0004, Weather Tuff bolt Qty. 160, Size 3/4" x 14", Treatment Hot Dip Galvanized; Item 0005, Weather Tuff bolt Qty. 125, Size 3/4" x 18", Treatment Hot Dip Galvanized; Item 0006, Weather Tuff bolt Qty. 221, Size 3/4" x 22", Treatment Hot Dip Galvanized; Item 0007, Weather Tuff bolt Qty. 1,184, Size 1" x 24", Treatment Hot Dip Galvanized; Item 0008, Heavy hex nut, Qty. 1,086, Size 3/4" bolt size, Treatment Hot Dip Galvanized; Item 0009, Heavy hex nut, Qty. 1,184, Size 1" bolt size, Treatment Hot Dip Galvanized; Item 0010, Dock washer, Qty. 1,086, Size 3/4" bolt size, 3"OD, Treatment Hot Dip Galvanized; and Item 0011 Dock washer, Qty. 1,184, Size 1" bolt size 3 1/4"OD, Treatment Hot Dip Galvanized. All hardware and fasteners listed above shall be in accordance with the below specifications: HARDWARE AND FASTENERS MATERIAL SPECIFICATIONS: All hardware, to include bolts, nuts and washers unless otherwise specified, shall be hot-dipped galvanized in accordance with ASTM Designation A-I53. All bolts shall be hot forged with heavy hexagonal heads and/or weather tuff timber heads, shall meet ASTM Specification A-307, Grade 2 steel and hot- dipped galvanized. All nuts shall be heavy hexagonal and meet ASTM A-307, Grade 2 steel and hot-dipped galvanized. All Dock Washers: Washers shall be standard cut, fabricated from commercial grade steel and conform to ASTM Specification Designation F844 and hot-dipped galvanized. All Spikes and Nails shall be 60d/4 ga. Ring Shank type 304 Stainless Steel and shall meet ASTM Specifications Designation FI667-03 for steel. All Threads on all threaded fasteners shall be of the cut type with the shank and outside thread diameters being equal to the nominal diameter of the fastener. All threads shall be cut prior to being galvanized. A notarized Certificate indicating that all hardware meets these specifications shall be submitted to the Project Manager. TIMBER AND LUMBER MATERIAL LIST: Piles, Cross Sills, Stringers, Bracing, Butt Blocks, etc. Item 0012 Piles, Qty 250, Size 12" x 35', Treatment 2.5 lbs. CCA; Item 0013 Lumber, Qty 206, Size 4" x 12" x 8', Treatment 1.5 lbs. CCA; Item 0014 Lumber, Qty 28, Size 4" x 12" x 22', Treatment 1.5 lbs. CCA; Item 0015 Lumber, Qty 267, Size 3" x 8" x 22', Treatment 1.5 lbs. CCA Decking, Curb Stops, Ramp and handrails (Must be treated with Copper Azole (CA-B) with Stabilycr Stabilizer Additive) Item 0016 Lumber, Qty. 1,067, Size 3" x 8" x 8', Treatment .10 CA-B; Item 0017 Lumber, Qty. 120, Size 3" x 8" x 22', Treatment .10 CA-B; Item 0018 Lumber, Qty. 78, Size 4" x 6" x 14', Treatment .10 CA-B; Item 0019 Lumber, Qty. 10, Size 4" x 6" x 22', Treatment .10 CA-B; Item 0020 Lumber, Qty. 50, Size 2" x 4" x 10', Treatment .10 CA-B; Item 0021 Lumber, Qty. 20, Size 6" x 6" x 20", Treatment .10 CA-B All Timber and Lumber material listed above shall be in accordance with the below specifications: TIMBER AND LUMBER MATERIAL SPECIFICATIONS: All Timber Piles shall be Southern Yellow Pine, 12" butt diameter measured 3 ft. from the butt, minimum 8" tip diameter, and shall meet the requirements of the ASTM D25 Standard Specifications for Round Timber Piles@. Timber piles shall be pressure treated with chromated copper arsenate preservative CCA-Type C to a final net retention of no less than 2.50 lbs. per cubic foot. Piles are to be 35 ft. in length, as specified on the drawings or as noted on attached material list. All Lumber shall be Southern Yellow Pine Grade #1 Dense or better with Fb=1, 450 psi; Fv=90 psi. before treatment, shall be graded and carry an identifiable grade mark in accordance with the Grading Rules of the Southern Pine Inspection Bureau. Pier stringers, blocks, braces and cross sills shall be pressure treated with chromated copper arsenate preservative CCA-Type C to a final net retention of no less than 1.50 lbs. per cubic foot. Pier deck boards and other related surface lumber as specified shall be pressure treaded with Copper Azole (CA-B) to a final net retention of .10 lbs. per cubic ft. (with Stabilycr Stabilizer Additive). All lumber shall be sized as shown on the drawings or as noted on material list. All timber and lumber shall conform to the latest American Wood Preservers Association (AWPA) Standards C18, C2, and P5 with a minimum sapwood penetration of 2.5 inches or 85%. All timber shall be free from warp, knot holes, and excessive checking, and are to be S4S (surfaced four sides), PET (precision end trimmed), kiln dried to within 1/4 inch of length specified before treatment. Lumber shall be banded properly for handling and shipment. Notarized Certificates of Treatment from supplier indicating that timber meets specifications as to type of treatment used, method of application and final net retention by assay in pounds per cubic foot shall be submitted to the Project Manager for approval prior to installation. All materials shall be delivered in factory crating, boxing, wrapping, etc. The contractor shall provide a 48 hour notice prior to delivery to Mr. Ron Rafter at 443-695-3067 or 410-643-8238. No deliveries will be accepted on Fridays. The required delivery date is 6 to 8 weeks or sooner after award of contract. All material shall be delivered to the following address: Cooperative Oxford Laboratory, 904 South Morris Street, Oxford, MD 21654. The provision at 52.212-1, Instructions to Offerors?Commercial applies to this acquisition and there are no addenda to this provision. In accordance with 52.212-1, vendors shall include a completed copy of its representations and certifications at FAR 52.212-3. Offeror Representations and Certifications ?Commercial Items, with its quote. [An offeror shall complete only paragraph (j) of this provision if the offeror has completed the annual representations and certificates electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (b) through (i) of this provision.] Vendors shall refer to www.arnet.gove to obtain a copy FAR provision 52.212-3. FAR Clause 52.212-4, Contract Terms and Conditions ? Commercial Items, applies to this acquisition and there are no addenda to this provision. FAR Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, applies to this acquisition and the following additional FAR clauses cited in the clause at paragraph (b) are applicable to this acquisition, as such consider the following clauses checked, (1), (5), (9), (15), (16), (17), (18), (19), (20), (21), (24), (26) and (31). No other additional contractual terms and conditions are applicable. No Defense Priorities and Allocations System (DPAS) rating are assigned. In order to comply with the Debt Collection Improvement Act of 1996, ALL CONTRACTORS must be registered in the Central Contractor Registration (CCR) to be considered for an award of a Federal contract. For information regarding registration in CCR contact the CCR website at www.ccr.gov/index.cfm. Venders are asked to provide their (DUNS) Dun and Bradstreet nine digit number along with their quotation. Quotes are due electronically to Mia.Grant@noaa.gov on or before September 14, 2006 by 1:00 p.m. EST. For information regarding this acquisition, please contact Ms. Mia Grant at (757) 441-6897 or via e-mail at the address listed above.
- Place of Performance
- Address: Deliver to: Cooperative Oxford Laboratory, 904 South Morris Street, Oxford, MD 21654
- Zip Code: 21654
- Country: UNITED STATES
- Zip Code: 21654
- Record
- SN01136098-W 20060909/060907220242 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |